MTC-C2 User Guide showing incorrect USB port information

The USB section on page 18 of the user guide is showing information for the MTC-EV3:
* /dev/ttyUSB0 Diagnostic port
* /dev/ttyUSB1 NMEA port
* /dev/ttyUSB2 Auxiliary port
* /dev/ttyUSB3 Modem port
Note: AT commands are allowed on modem and auxiliary ports.



The correct information is for the MTC-C2:
* /dev/ttyUSB0 Diagnostic port
* /dev/ttyUSB1 Modem Port



Further down we have this from MTC-EV3:
3. Check for the existence of the proper #define statement.
For C2 devices: #define TELIT_PRODUCT_CE910_DUAL 0x1010


Should be showing the following product ID for the MTC-C2: (0x1011)
3. Check for the existence of the proper #define statement.
For C2 devices: #define TELIT_PRODUCT_CE910_DUAL 0x1011


To download the Windows driver, you will need to go here from the multitech.com home page.

HOME > PRODUCTS > WIRELESS > MULTICONNECT(R) CELL 100 SERIES >

http://www.multitech.com/brands/multiconnect-cell-100-series