Is there a way for the RF300E to dial-out to the Internet (via an ISP)?

The RF300E itself can not be setup to dial-out to an ISP. The RF300E is typically setup for Remote Access applications. If you want to make use of the RF300E ISDN/modem ports so the workstation on the LAN can dialout, you will need to:

- Install MCSI on each workstation.

- Map a virtual com port on the workstation to an isdn/modem port on the RF300E.

- Run some communication software on the workstation to communicate with the virtual com port, and MCSI will then redirect all communicate to the RF300E.