I have a couple of RF500s devices and I would like to allow my users to use a Webcam. How can I make it work?

To setup the RF500s for DMZ:

- Open the manager software

- Select the RF500s that you want to configure

- Select General Settings in the upper right corner of the screen

- Enable IP mapping on the bottom left

- Go into IP mapping (Virtual server) just to the right of the enable button

- Enter the port you are using "ethernet port" then your public IP address for the External IP address

- Put port 0 in the ports to open all the ports

- Then you need to port IP address of Webcam in the internal IP address and port 0.