I have a RasFinder that does not boot completely and I can´t access it, the RAS doesn't give the login prompt.

ADDITIONAL INFORMATION:

This is the mesage I receive:

ATS0=1&D0
Boot Version: 3.00.16
Memory: Bank1 = 4MB, Bank2 = 4MB. CPU speed = 25.8048MHz.
Type 'd' to download (Setup or Code).
Booting...
|ATS

RASFinder Version : 3.17
Dated : October 25, 2001

Copyright (C) 1996 Multi-Tech Systems, Inc.
Multi-Tech Systems, Inc., 2205 Woodale Drive
Mounds View, Minnesota 55112, USA.
Structures memory initialized

Operating with 5920 K DRAM for device drivers, applications and stacks
NVRAM Initialized
Buffers Initialized
Flash write scheduler initialized
Filters not found
Cleaned up Filters
Device Drivers Initialized
LSL Initialized
WEB Server initialized successfuly with timeout value of 300 seconds
DHCP initialized successfully

Expanded User Database, number of users : 1
WAN: Initialized port number 0
Initializing modem, setting up modem default info.
WAN: Initialized port number 1
Initializing modem, setting up modem default info.
WAN: Initialized port number 2
Initializing modem, setting up modem default info.
WEB: HTTP timer has run out... deinitializing CM
WEB: Freeing memory allocated for globals...


RESPONSE:

Your RASFinder is booting properly. To get the login menu, you have to type in the word login