I am trying to use two RF550s in a LAN to LAN with fixed WAN IP configuration. On one end I am using a Netware 6.0 server. I don't seem to be able to communicate with the server through the VPN. Are any special settings required?

Our RF550VPN does not support the IPX protocol. If your novell server is doing Name broadcasts, this will not work either.

Please check the following:

1) Make sure your VPN tunnel is active

2) Make sure you can ping from one LAN to the other LAN

3) Make sure you are running the IP protocol only

4) Try to access the server via IP address instead of using a name

5) If your novell server has Web or Telnet built in, then try to access the web and telnet using VPN