How to do UDP dialing on the T1 VoIP.

ADDITIONAL INFORMATION:

I'm familiar with UDP dialing on the MVP200s with the 2xx phone book entry, but it is not taking this in the MVP2410.

RESPONSE:

You need to enter the unique first digit under the destination pattern: 2, in the out bound phone book, along with the IP address of the voip expecting the digit. Then under the inbound phonebook on the opposite voip have 2 listed both as a remove and add prefix entry, with channel 0 to hunt between channels on the voip to the PBX.

When the voip recieves the 2 from the pbx in extionsion 204, it will route it to the remote voip and the remote voip will send 204 to the PBX.