How can I configure this unit using the ethernet connection? When I run the WPST it shows me to select a COM port, but the device does not have any serial port.

We have documentation on how to use WPST and a program called WinMCSI to configure the Ethernet CDMA. The document explains how to download WPST and WinMCSI along with directions to setup WinMCSI so that it will create a virtual com port to the ethernet modem. This virtual com port acts as a redirector for the PC so that it thinks that there is a com port there but in reality it is going over IP to get to the device.

See our "howto_setup_ethernet_cdma_using_wpst.doc" at:

https://webfiles.multitech.com/resolutions/documents/wireless


The document "how to_setup_ethernet_cdma_using_wpst" can be downloaded from our ftp site at:

https://webfiles.multitech.com/resolutions/documents/wireless