Group Name, Source Port and Protocol Services changes.

- On the Services page, the source port for DNS and SSH has been changed from 1024:65535 to 1:65535

- While editing a service and changing the protocol, the ports will vanish. The TCP, UDP, TCP+UDP protocols are a group and the AH, ESP protocols are a group, now if the services are edited and the protocol is changed within a group, the source and destination port fields or the SPI values will remain intact.

- Changed the alert message displayed if the service name added already exists in the services / service group lists.

Software version 3.02 or greater fixes these problems. See Resolution 1867 on our Web site for the upgrade procedure:

http://www.multitech.com/en_US/SUPPORT/Help/Resolutions/Res1867