Fixed a V.44 negotiation problem. The modem may exhibit several symptoms: - Connect and pass garbled data - Connect briefly and then disconnect - Not make a connection

ADDITIONAL INFORMATION:

When we were in answer mode configured for +DCS=1,2 (default setting to do V.44 with server only) and the originate side was configured to do V.44 client or server, the answer side would get a V.44 connection and the originate side would get V.42 (no compression).


RESPONSE:

MT5634ZBA-USB-V92:

This problem is fixed in Firmware version 2.27M or newer, this firmware can be downloaded from our Web site at:

http://www.multitech.com/en_US/SUPPORT/Families/MultiModemZBA/firmware


MT5634ZBA-DID:

This problem is fixed in Firmware version 1.28F or newer, this firmware can be downloaded from our Web site at:

http://www.multitech.com/en_US/SUPPORT/Families/MultiModemDID/firmware


MT5634ZPX-PCI-V92:

This problem is fixed in Firmware version 1.32H or newer, this firmware can be downloaded from our Web site at:

http://www.multitech.com/en_US/SUPPORT/Families/MultiModemZPX/firmware