Fixed - several parameter display problems.

ADDITIONAL INFORMATION

- All ten supported country codes are now available on the LCD panel.
- Removed the Digital Loopback options the the display because the V.92 model doesn't support them.
- When configuring the&E0,&E1,&E2 parameters using the LCD panel, the correct settings would not be displayed when using the&Vn command.
- When using the +MS? command, the +MS would not display the modulation rate.
- The&V1 command (statistics for the last connection) now displays the speeds.


RESPONSE

These were fixed in firmware version 1.702L. The latest firmware can be downloaded from our Web site at:

http://www.multitech.com/en_US/SUPPORT/Families/MultiModemII/firmware