Fixed - An AT command processing problem. Depending on what is happening on the cellular side, (i.e. signal strength adjusting or call being received), the OK would be received, but the parameter would not be changed.

CF100FX2-C
This was changed in firmware version 2.04a. This firmware along with instructions can be downloaded from our Web site at:

http://www.multitech.com/en_US/SUPPORT/Families/CallFinderCDMA/firmware


CF100FX2-G
This was changed in firmware version 1.07b. This firmware along with instructions can be downloaded from our Web site at:

http://www.multitech.com/en_US/SUPPORT/Families/CallFinderGSM/firmware