Fixed - A problem of calls getting disconnected due to the detection of flash hook of less than 500ms.

ADDITIONAL INFORMATION:

One VoIP is connected to a PBX extension and the other is FXS with an analog phone attached. The PBX is setup to allow #, *, with flash hook transfers. When pressing the flash key on the FXS end, the Voip is not passing it to the PBX and the call disconnects.


RESPONSE:

Now the MultiVoIP will detect the flash hook as low as 60ms without disconnecting the call.


MVP2410 / MVP3010:
This was fixed in firmware version (4.07.c9) and corresponding software version (x.07).

MVP130:
This was fixed in firmware version (1.07.c9) and corresponding software version (x.07).

MVP210 / MVP410 / MVP810:
This was fixed in firmware version (6.07.c9) and corresponding software version (x.07).


The latest firmware and software along with instructions can be downloaded from our Web sites at:

http://www.multitech.com/en_US/SUPPORT/Families/MultiVOIP/firmware