Firmware Upgrade Procedure and Flash Upload Procedure.

Required Tool: TFTP Client

A Trivial File Transfer Protocol (TFTP) client must be installed on your PC in order to execute the flash upload procedure.


TFTP for Windows

Though Windows 95, 98 and ME do not come with a TFTP client, the file can be copied from a PC operating Windows NT or 2000 (not XP):

- On a PC operating Windows NT or Windows 2000, locate the TFTP file at
C:\WINNT\SYSTEM32\tftp.exe.

- Copy the this file to C:\WINDOWS on your Windows 95, 98 or ME PC.


Downloading TFTP from the Internet

If your operating system does not include a TFTP client program, a TFTP client program is available for Windows users from the Internet. Walusoft's TFTP Suite Pro is recommended. The URL is:

http://archive.org/details/tucows_195548_TFTP_Suite_Pro



Obtaining the Latest Version of the Firmware

To obtain the latest version of the firmware, contact your Multi-Tech Sales Representative or contact Multi-Tech directly by phone or email:

Phone: 763-785-3500 or 800-328-9717

Email: oemsales@multitech.com



Upload Firmware to Your SocketEthernetIP


Using Windows TFTP

1. Open Command Prompt

Open the Windows Command Prompt program:

- Click the Start button in the lower left-hand corner of your screen

- Click Programs

- Click Accessories

- Double-click Command Prompt


2. Enter the Upload Request

At the prompt (C:\>), type "tftp -i<SocketEthernetIP IP Address>put<firmware filename>
<destination filename>. Then press the Enter key.

Definitions:

-<SocketEthernetIP IP Address>

Address of the SocketEthernetIP to which you are uploading the firmware image

-<firmware filename>

Filename under which the firmware file was saved on your PC or local network


-<destination filename>

Filename must be AMD-tftp.bin

Example:

tftp -i 192.168.2.1 put c:\example.bin AMD-tftp.bin



Using Walusoft TFTP


1. Open TFTP Client

Open the Walusoft TFTP Client32 program.

- Click the Start button in the lower left-hand corner of your screen

- Click Programs

- Click TFTPSuitePro2000

- Select TFTPClient32


2. Enter the Upload Request

Complete the Host and Local File fields, leaving the Remote File field blank and all other fields at default settings. Then click the Send (or Put) button.

Definitions:

- Host (SocketEthernetIP IP Address)

IP Address of the SocketEthernetIP to which you want to flash download firmware;
e.g., 192.168.2.1

- Local File

The same filename under which you saved the firmware file.


- Remote File

AMD-tftp.bin


Firmware Upload Completion

Once the upload is completed, the SocketEthernetIP will take approximately 20 seconds to reboot.