FaxFinder FHS: error codes


2 - Fax call was aborted by the fax software either through a character abort or by dropping DTR
11 - Fax modem timed out in Phase A
20 - Unspecified phase B error
22 - Received DCN when waiting for DIS frames
23 - Invalid command received when waiting for DIS frames
24 - Carrier hasn't gone away for 10 seconds
25 - No response to DCS sent three times
26 - DIS received three times in response to DCS
27 - Failure to train to minimum baud rate
28 - Invalid response to DCS
43 - Send fax data underflow
48 - Too many block retransmits when sending a fax
50 - No response or invalid response to (EOR, RR or CTC)
51 - Invalid PPS-xxx frame OR received a DCN in response to (PPS,EOR, RR, or CTC)
52 - No response to
55 - V.34 command channel lost
71 - Invalid DCS length
72 - DCN received when waiting for DCS
73 - T2 timeout when waiting for page
74 - T1 Timeout after EOM received
91 - Received scan line is longer than 5 seconds
A2 - Invalid command when expected (a PPS-xxx, CTC, or RR) frame
A3 - Timeout receiving a frame when receiving a fax
A4 - Received a DCN instead of command from the transmitter
A5 - T2 timer expired while receiving a fax
A7 - Received EOR frame when it was not appropriate
A9 - No receive silence for 4 minutes
E0 - Over 10 seconds spent in one state