Determine MultiVOIP's current IP address via console connectionFollowing is how you can determine the IP address currently configured on a MultiVOIP via a connection to the unit's Command port:
Serially connect the MultiVOIP to terminal software (Hyperterminal, Putty, Tera Term, etc.) at 115200, 8N1, Hardware Flow Control.
Power-cycle the MVP and you should see messages on the terminal screen as the unit boots.
Once the unit finishes booting, which takes about 2 minutes the bottom 6-8 lines of the terminal screen should show "VERSION INFORMATION", which will include the MultiVOIP's current firmware version and IP address.
Some older firmware versions (x.05 and earlier, I think) do not show this "VERSION INFORMATION" when booting to terminal software.