Changed - The operation of the FXO ring count. On an incoming ring burst on the FXO interface the MultiVoIP goes off-hook and answers only after the ring completes.

When selecting '0' ring count for FXO, now we don't answer the call. So, if the user wants to prevent incoming FXO calls from the CO or Telco, FXO ring count can be set to 0.


MVP2410 / MVP3010:
This was Changed in firmware version (4.07.c9) and corresponding software version (x.07).

MVP130:
This was Changed in firmware version (1.07.c9) and corresponding software version (x.07).

MVP210 / MVP410 / MVP810:
This was Changed in firmware version (6.07.c9) and corresponding software version (x.07).


The latest firmware and software along with instructions can be downloaded from our Web sites at:

http://www.multitech.com/en_US/SUPPORT/Families/MultiVOIP/firmware