Can I set up a RF650VPN so it accepts incoming VPN connections from both multiple RF550&IPSec clients both on dynamic IP?

ADDITIONAL INFORMATION:

I can't get this to work very well. As soon as I configure more than one VPN-connection with IP-gateway 0.0.0.0 (or ANY 650), it only chooses one of the connections.


RESPONSE:

You need to create two connections for the RF650VPN, one for dynamic Client to LAN, and one for dynamic LAN-to-LAN. You MUST use the same preshare key for both connections.

Here is what you do when you configure dynamic on the RF650VPN:

Client to LAN:
1) remote IP = Any
2) remote network = blank

LAN to LAN:
1) remote IP = Any
2) remote network = the private LAN of the remote

Here is what you do when you configure dynamic on the RF550VPN:

Client to LAN:
1) remote network = 0.0.0.0
2) remote mask = 0.0.0.0
3) remote gateway IP = 0.0.0.0

LAN to LAN:
1) remote network = private LAN of the remote
2) remote mask = private mask of the remote LAN
3) remote gateway IP = 0.0.0.0