This file contains a Linux 2.4.x kernel driver for the ISI-UPCI cards listed below. Please view the README release notes before installation.

This file contains 32 bit and 64 bit drivers for Windows XP, Vista, 2003, 2008, 2008 R2 and 7 to use with ISI UPCI cards ONLY.   DO NOT use this driver for older ISI cards.

This file contains instructions on how to install Linux 2.6.x kernel native driver for the ISI-UPCI and ISI-PCIE cards listed below.

Global V.92 firmware for the MultiModem ISI5634UPCI modems. 

Flash Wizard Utility for Linux OS to update firmware on modems.  Firmware has a naming convention that must be adhered and is documented in the following link -> Naming Convention Document.  This software utility and Linux installation instructions can be found on SourceForge.net(Click Link to follow).  README will

describe changes made since previous release.

 

Flash Utility for updating firmware on modems and other products.

Read Release Notes to view changes made since the previous version

and  Flash Wizard firmware file name convention to help understand the

name convention format.

Utility for setting or changing country codes on global modems.

Utility for resetting individual modems contained within the ISI card.  No install is required, the application will require the existence of a newer ISI product.  Older ISI2834 or ISI3334 cards will not be affected and will yield an error "Error in Writing..." when attempting to reset a modem.

 

Procedure:

 

1.) Download the .EXE(executable) into a TEMP directory.

2.) Disable any application using the ISI for communications.

3.) Run the executable file and select the modem you wish to reset.

4.) If the modem is accessible, will notify that the reset was successful.