SocketModem® Resolutions

Updated: 01/04/2011 10:24:07 AM

Fax Failures - Having problems with false V.21 detections while receiving faxes

Products: MT9234SMI-L-92,MT5634SMI-92,MT5634ZBA-V92,FF110,FF200,FF420,MT9234SMI,MT9234ZBA,FF220,MT9234ZBA-USB,MT9234SMI-HV-92,FF130,FF230,FF430,FF830,FF120,FF820,MT5634ZBA-V-V92,FF100

Updated: 06/28/2010 11:32:20 AM

Windows 2000 states 'Cannot find security catalog file' and will not install modem

Products: MT5634ZPW,MT5600DSVD2,MT5634ZLX-FE,MT5634ZLX-E,MT5634HD8,MT5634ZPX,MT5600ZDX,MT5634HD16,MT5600BA,MT5634ZBA,MT5634ZBA-USB,MT5634MSV,MT5634ZPX-PCI,MT5634SMI,MT5634MU,MT5600DSVD,MT5634SMI-IP,MT5634SMI-P,MT5634ZBA-DID,MT5634SMI-92,MT5600BA-V92,MT5634ZBA-V92,MT5634ZPX-PCI-V92,MT5656ZDX,MT5634SMI-P-92,MT5634ZLX,MT5600BL,MT5600ZDXV,MT5656ZDXV,MT5634ZBA-USB-V92

Updated: 06/28/2010 11:31:46 AM

I set my modem to answer after 8 rings, but the modem times out and won't connect.

Products: MT224xx,MT932xx,MT1432BA,MT1432PCS,MT1932ZPX2,MT1432MU,MT1432BC,MT5600DSVD2,MT1432BLR,MT1432LT,MT1432BL,MT1932BL,MT1432PCSI,MT1432ZDX,MT1932PCS,MT2834BL,MT1932ZPX,MT2834BC,MT2834BLR,MT1932ZDX,MT1932ZDX,MT2834PCS2,MT2834PCS,MT2834LT,MT2834ZPX,MT2834ZDXb-U,MT3400SMI,MT2834BR,MT3410ZLX,MT1432PCS2,MT2834LTI,MT5634ZLX-FE,MT56128ZLX,MT5634ZLX-E,MT1432PCS3,MT5634ZPX,MT5600ZDX,MT5600BA,MT5634ZBA,MT5634ZBA-USB,MT56128ZLX-NT,MT56128ZLX-ST,MT5634ZPX-PCI,MT5634SMI,MT5634MU,MT5600DSVD,MT3400ZLX,MT3334SMI,MT5634SMI-IP,MT5634SMI-P,MT5600SMI,MT5634ZBA-DID,MT5600BA-V92,MT5634ZBA-V92,MT5634ZPX-PCI-V92,MT5656ZDX,MT5634ZLX,MT5600BL,MT3334ZDX,MT2834BA,MT5600ZDXV,MT5656ZDXV,MT5634ZBA-USB-V92,MT2834ZDXb,MT212xx,MT3334LT,SC144H0,SC144H1,SC144H1-L,SC336H0,SC336H1,SC336H1-L,SC56H0,SC56H1,SC56H1-L,SF144D/SPH0D5,SF144D/SPH1D5,SF224ATF/H0D5,SF224ATF/H1D5,SF336D/SPH0D5,SF336D/SPH1D5,SF336D/SPH1DC,SF56D/SPH0D5,SF56D/SPH1D5

Updated: 06/28/2010 11:30:51 AM

Does this modem support Multi Drop (Multi Point) connections (Lines)

Products: MT1432MR,MT224xx,MT932xx,MT1432BA,MT1432PCS,MT1432MU,MT1432BC,MT5600DSVD2,MT1432BLR,MT1432BL,MT1932BL,MT1432ZDX,MT1932PCS,MT2834BL,MT2834BLR,MT1932ZDX,MT2834MR,MT2834ZDXb-U,MT3400SMI,MT2834BR,MT1432PCS2,MT2834MR-PSTN,MT1432PCS3,MT2834MR6,MT3334HD8,MT5634HD8,MT5600ZDX,MT5634HD16,MT5600BA,MT5634ZBA,MT5634ZBA-USB,MT5634MSV,MT5634SMI,MT5634MU,MT5600DSVD,MT3334SMI,MT5634SMI-IP,MT5634SMI-P,MT5600SMI,MT5634ZBA-DID,MT5600BA-V92,MT5634ZBA-V92,MT5600BL,MT3334ZDX,MT2834BA,MT5600ZDXV,MT5634ZBA-USB-V92,MT2834ZDXb,MT212xx,SC144H0,SC144H1,SC144H1-L,SC336H0,SC336H1,SC336H1-L,SC56H0,SC56H1,SC56H1-L,SF144D/SPH0D5,SF144D/SPH1D5,SF224ATF/H0D5,SF224ATF/H1D5,SF336D/SPH0D5,SF336D/SPH1D5,SF336D/SPH1DC,SF56D/SPH0D5,SF56D/SPH1D5

Updated: 02/17/2009 03:33:11 PM

I am trying to enter loopback test mode in the MT5600SMI. Every time I issue the command I get back AT&T1 ERROR. Does the MT5600SMI support the loopback mode

Products: MT5600SMI-P32,MT5600SMI-P34,MT5600SMI-L92,MT5600SMI-34,MT5600SMI-32,MT5600SMI-L32,MT5600SMI-L34,MT5600SMI-PL34,MT5600SMI-PL92,MT5600SMI-XL34,MT5600SMI-XL92,MT5600SMI,MT5600SMI-92,MT5600SMI-P92

Updated: 11/05/2008 06:09:00 PM

Does this Socket Modem support 'Caller ID'

Products: MT5634SMI,MT5634SMI-92,MT5634SMI-P-92,MT9234SMI

Updated: 04/22/2008 03:11:50 PM

I cannot find the lead spacing for the SocketModem Embedded dial-up Modem data sheet.

Products: MT2456SMI-22,MT5600SMI-34,MT5600SMI-32,MT2456SMI-IP-32,MT2456SMI-IP-34,MT5634SMI,MT5634SMI-IP,MT5600SMI,MT5634SMI-92,MT5634SMI-92,MT5634SMI-34,MT2456SMI-IP-92,MTMMC-G-F1,MTSMC-G-F1,MTMMC-C,MTSMC-C,MT128SMI,MTSMC-E

Updated: 04/09/2008 11:02:39 AM

FlashWizard does not see HEX file

Products: FlashWizard,MT2834BL,MT2834BLR,MT2834ZPX,MT3400SMI,MT2834BR,MT5600ZDX,MT5600BA,MT5634ZBA,MT5634ZBA-USB,MT5634ZPX-PCI,MT5634SMI,MT5634MU,MT3334SMI,MT5634SMI-P,MT5600SMI,MT5600BA-V92,MT5634ZBA-V92,MT5634ZPX-PCI-V92,MT5656ZDX,MT5600BL,MT2834BA,MT5600ZDXV,MT5656ZDXV,MT5634ZBA-USB-V92,MT2834ZDXb

Updated: 01/04/2008 09:31:11 AM

What is the meaning of R2 in the model number

Product: MT5634SMI-34

Updated: 06/20/2007 10:38:38 AM

Does your SocketModem be used under the IBM SDLC protocol

Product: MT5600SMI-32

Updated: 05/24/2007 03:26:56 PM

Is it possible for the modem to receive multiple faxes simultaneously

Products: MT5600DSVD2,MT2834BL,MT2834BC,MT2834BLR,MT2834PCS2,MT2834PCS,MT2834ZPX,MT2834ZDXb-U,MT2834BR,MT5634ZPX,MT5600ZDX,MT5600BA,MT5634ZBA,MT5634ZBA-USB,MT5634MSV,MT5634ZPX-PCI,MT5634SMI,MT5634MU,MT5600DSVD,MT5600SMI,MT5634ZBA-DID,MT5600BA-V92,MT5634ZBA-V92,MT5634ZPX-PCI-V92,MT5656ZDX,MT5634IND,MT5600BR-V92,MT5634ZBA-V-V92,MT5600BL,MT3334ZDX,MT2834BA,MT5634ZPX-PCI-U,MT5600ZDXV,MT5656ZDXV,MT5634ZBA-USB-V92,MT2834ZDXb

Updated: 03/28/2007 09:34:33 AM

In Terse Mode (AT V0), when the modem establishes a connection, it should give me the respective number to the CONNECT code (For CONNECT 9600, the code should be 12). It doesn't, for any connection rate, it just gives '1'.

Product: MT5634SMI-34

Updated: 03/28/2007 10:14:14 AM

Does this modem support Error Correcting Mode (ECM) when faxing

Products: ISI5634PCI-4,MT5634SMI-92,MT5634ZBA-V92,MT5634ZPX-PCI-V92,ISI5634PCI-8,MT5634ZBA-USB-V92

Updated: 03/28/2007 09:54:12 AM

Modem responds to the ATI command with FLASH Vs 4.3.

Products: MT5634ZPX,MT5634ZBA,MT5634MSV,MT5634ZPX-PCI,MT5634SMI,MT3334SMI,MT5634SMI-P,MT5634ZBA-DID,MT5634ZPX-PCI-V92

Updated: 03/09/2007 09:15:39 AM

How do I change the setup password

Products: MT5634ZPX,MT5634ZBA,MT5634MSV,MT5634ZPX-PCI,MT5634SMI,MT3334SMI,MT5634SMI-P,MT5634ZBA-DID,MT5634ZBA-V92,MT5634ZPX-PCI-V92

Updated: 03/09/2007 09:16:01 AM

What is the escape sequence for remote configuration

Products: MT5634ZPX,MT5634ZBA,MT5634MSV,MT5634ZPX-PCI,MT5634SMI,MT3334SMI,MT5634SMI-P,MT5634ZBA-DID,MT5634ZBA-V92,MT5634ZPX-PCI-V92

Updated: 02/21/2007 11:51:38 AM

Is it possible to have multiple V.92 AT commands contained in one string (ex. AT+MS=V34,1+DCS1,1) These commands work separately, but I always get an ERROR result code if the're combined as one string

Products: MT5634ZBA-V92,MT5634SMI-P-92

Updated: 02/05/2007 10:05:38 AM

When you send a fax with WinFax PRO 10.xx, you may see this error message 'Fax/Modem Alert: error setting up your communication port state'.

Products: MT5600SMI-34,MT5600SMI-32,MT5600ZDX,MT5600BA,MT5634ZBA,MT5634ZBA-USB,MT5634MSV,MT5634SMI,MT5634MU,MT5600SMI,MT5634SMI-92,MT5600BA-V92,MT5634ZBA-V92,MT5634SMI-34,MT5600SMI-92,MT5634IND,MT5600BR-V92,MT5634ZBA-V-V92,MT5600BL,MT5600ZDXV,MT5634ZBA-USB-V92

Updated: 10/26/2006 01:34:10 PM

We are using your socket modems in several new applications, do they support 2 wire leased line mode

Updated: 10/06/2006 12:16:03 PM

How can I use an MT5600SMI to transmit the 1300 Hz Calling Tone every time an outgiong call is initiated with the ATD command Something like the ^M command but it should be stored as a permanent modem setting not only a per-session command.

Products: MT5600SMI-34,MT5634SMI

Updated: 06/13/2006 04:49:08 PM

Do you have a list of country codes for this global modem

Products: MT2456SMI-22,MT2456SMI-IP-22,MT2456SMI-IP-32,MT2456SMI-IP-34,MT5634ZPX-PCI,MT5634SMI,MT5600SMI,MT5600BA-V92,MT5634ZBA-V92,MT5634ZPX-PCI-V92,MT2456SMI-IP-92,MT5656SMI,MT5634IND,MT5634ZBA-V-V92,MT5634ZPX-PCI-U,MT5634ZBA-USB-V92

Updated: 06/02/2006 08:37:34 AM

Why does this modem respond with an error message when I give it a %DCn command (AT COMMAND CONTROL)

Products: MT5634SMI-P,MT5634SMI-P-92

Updated: 05/22/2006 04:59:30 PM

Does this modem support remote configuration

Products: MT3400SMI,MT5600ZDX,MT5600ZDX,MT5600DSVD,MT5656ZDX,MT5600ZDXV,MT5656ZDXV,SC336H1

Updated: 03/22/2006 09:57:29 AM

Does the Socket Modem Model MT5600SMI and Socket Ethernet IP MTXCSEM modules both operate above 115Kbaud, such as double that at 230Kbaud

Products: MT5600SMI,MTXCSEM

Updated: 02/02/2006 08:41:19 AM

Does this socket modem support Super G3 fax

Product: MT5634SMI

Updated: 10/04/2005 04:34:18 PM

I can't set the Transmit Level range from 0 dB to -6dB with S Register 91, For example, when I set S91=5 or less, the modem responds 'OK', but the command ATS responds with 6. Are there restrictions on the attenuation level in these modems

Product: MT5600SMI-92

Updated: 10/04/2005 04:40:40 PM

What is the minimum and maximum ring frequency detection of this modem

Product: MT5600SMI-XL34

Updated: 09/06/2005 05:48:31 PM

What's the difference between the MT3400SMI, MT5600SMI-34, MT5600SMI-L34 and MT5600SMI-XL34 (or MT5600SMI-92, MT5600SMI-L92 and MT5600SMI-XL92)

Products: MT5600SMI-L92,MT5600SMI-34,MT5600SMI-L32,MT5600SMI-L34,MT5600SMI-PL34,MT3400SMI,MT5600SMI-PL92,MT5600SMI-XL34,MT5600SMI-XL92,MT5600SMI-92

Updated: 07/19/2005 01:19:43 PM

Sending an ATDT123456 dial command causes the modem module to send the result code 'ERROR'.

Products: MT224xx,MT1432BA,MT1432PCS,MT1432MU,MT1432BLR,MT1432BL,MT1932BL,MT1932PCS,MT2834BL,MT2834BLR,MT1932ZDX,MT2834BR,MT1432PCS2,MT1432PCS3,MT5634SMI,MT5634SMI-IP,MT3334ZDX,MT2834BA,MT2834ZDXb

Updated: 07/15/2005 04:27:57 PM

Do the SocketModem series modems support receiver sensitivity adjustments through S-register commands

Products: MT5634SMI-92,MT5634ZBA-V92,MT5634ZPX-PCI-V92,MT5634SMI-P-92,MT5634ZBA-V-V92

Updated: 06/23/2005 02:06:16 PM

I receive an error message when I try to save an extra setting using the AT&W0 command.

Product: MT2456SMI-22

Updated: 06/23/2005 02:11:21 PM

I'm trying to do an analog loop back test but I get an error response to the command AT&T8.

Product: MT2456SMI-22

Updated: 02/16/2005 09:43:37 AM

The MT5634SMI-34 SocketModem gives an error when I give it the AT+MS= command from Hyperterminal. Does this mean that it doesn't support V.92 commands If not, then how do I change its modulation scheme to V.34

Product: MT5634SMI-34

Updated: 02/11/2005 11:21:55 AM

What is the difference between the SF144D/SPH0D5 and the SF144D/SPH1D5

Product: SF144D/SPH0D5

Updated: 02/03/2005 08:49:57 AM

The modem is not working correctly after a reset.

Product: MT5634SMI-IP

Updated: 01/19/2005 11:18:07 AM

Does your SocketModem MT5634SMI-92 support LINUX in general. Are there any drivers available

Product: MT5634SMI-92

Updated: 12/14/2004 02:38:43 PM

Does the MT5600SMI-xx modules support distinctive ring

Product: MT5600SMI-34

Updated: 10/06/2004 02:46:09 PM

This modem module seems to have a default serial baud rate of 57600bps while the spec gives a default of 115200bps. Is it a spec error

Product: MT5634SMI

Updated: 08/06/2004 01:38:20 PM

The MT5600SMI can support and is certified in many countries. If we are using it in different countries, must we set the country profiles, or can the modem detect it automatically

Updated: 07/21/2004 02:14:07 PM

Does the MT5634SMI or other socket models support: V.29 ITU-TSS standard, Point-multipoint connections, half duplex 2 wire leased lines, flow control with control signals

Product: MT5634SMI

Updated: 07/06/2004 09:19:20 AM

Does this modem support V.25 calling tone functionality We tried ATD^T and then the phone number and you should be able to pick up the phone and hear a tone. It didn't work (we thought this was how to check it).

Products: MT5634ZBA,MT5634ZBA-USB,MT5634ZPX-PCI,MT5634SMI,MT5634SMI,MT5634SMI-IP,MT5634SMI-P,MT5634ZBA-DID,MT5634SMI-92,MT5634SMI-92,MT5634ZBA-V92,MT5634ZPX-PCI-V92,MT5634SMI-P-92,MT5634SMI-34,MT5634ZBA-USB-V92

Updated: 04/16/2004 09:29:21 AM

Can this modem digitize the audio from the PSTN line and send it to the host microcontroller through the serial port Can it decipher incoming DTMF tones

Product: MT5600SMI

Updated: 04/05/2004 04:35:57 PM

What could happen if the customer wired the phone line Tip and Ring wrong Will it still work or not Any potential damage Do I need to incorporate protection to prevent damage in case the customer connects it wrong

Product: MT5634SMI

Updated: 03/15/2004 03:56:41 PM

What is the current consumption and power specifications for this modem

Updated: 03/02/2004 09:33:04 AM

The manual says that the Analog to Digital barrier on the drawing is really a safety isolation barrier between TNV and SELV. What does this mean

Products: MT2834BL,MT2834BC,MT2834BLR,MT2834ZPX,MT2834ZDXb-U,MT3400SMI,MT2834BR,MT2834LTI,MT5634ZPX,MT5634ZBA,MT5634MSV,MT5634ZPX-PCI,MT5634SMI,MT3334SMI,MT5634SMI-P,MT5600SMI,MT5634ZBA-DID,MT5634ZBA-V92,MT5634ZPX-PCI-V92,MT2834BA,MT2834ZDXb

Updated: 02/24/2004 04:06:36 PM

Can voice mode be configured to be full duplex or is it limited to half duplex mode only

Product: MT5600SMI-L92

Updated: 02/24/2004 04:07:25 PM

Is its parallel input compatible with the 16550 UART How large a FIFO does it have

Product: MT5600SMI-92

Updated: 02/24/2004 02:12:23 PM

Does this modem support V.80 in transparent asynchronous access mode over V.22bis

Product: MT3400SMI

Updated: 02/24/2004 04:11:25 PM

Does this modem have a watchdog feature built in

Product: MT3400SMI

Updated: 02/24/2004 02:13:02 PM

How do I configure the modem to automatically detect the DTE rate (serial speed)

Products: MT3400SMI,MT5600SMI

Updated: 02/24/2004 04:14:30 PM

What is the sleep mode power consumption

Product: MT3400SMI

Updated: 02/24/2004 02:23:29 PM

Does this modem support DTMF detection

Product: MT2456SMI-22

Updated: 02/09/2004 10:36:07 AM

How do I select the leased line mode, a switch or an AT command How do I select the answer and originate modem

Products: MT5634SMI-92,MT5634SMI-34

Updated: 02/05/2004 01:54:43 PM

Does the SocketModem support leased line operation

Products: MT3400SMI,MT3334SMI,MT5600SMI,SC144H0,SC144H1,SC144H1-L,SC336H0,SC336H1,SC336H1-L,SC56H0,SC56H0,SC56H1,SC56H1-L,SF144D/SPH0D5,SF144D/SPH1D5,SF224ATF/H0D5,SF224ATF/H1D5,SF336D/SPH0D5,SF336D/SPH1D5,SF336D/SPH1DC,SF56D/SPH0D5,SF56D/SPH1D5

Updated: 01/21/2004 01:01:22 PM

We are interested in the MT3334SMI for a special application and the requirement is different from a standard modem in that there isn't any DC voltage over the line (dry line). Does this modem support leased lines

Products: MT3334SMI,MT5634SMI-IP,MT5634SMI-92,MT5634SMI-P-92

Updated: 01/09/2004 01:30:36 PM

Is this module modem able to record / playback voice&sound

Product: MT5634SMI

Updated: 12/22/2003 04:30:33 PM

X_Off (XOFF)characters continuously output.

Product: MT5634SMI

Updated: 12/22/2003 01:04:29 PM

Is this modem Hayes Auto Sync Compatable

Products: MT5634ZPX,MT5634ZBA,MT5634MSV,MT5634ZPX-PCI,MT5634SMI,MT3334SMI,MT5634SMI-P,MT5634ZBA-DID,MT5634ZBA-V92,MT5634ZPX-PCI-V92,MT2834BA

Updated: 12/16/2003 09:30:09 AM

Does this embedded modem support Reverse mode

Products: MT5634SMI,MT5634SMI-92,MT5634SMI-34

Updated: 12/12/2003 02:14:09 PM

I want to enhance the security of our communications link by implementing 'dial in answer mode' (aka reverse mode) for the remote client and 'answer in originate mode' for homebase using the Rn command. This technique has not been successful.

Product: MT5600SMI

Updated: 11/25/2003 01:13:23 PM

I installed the modem driver in my system and tried connecting to the Internet using my dial up software. However the modem does not respond, it gives a hardware failure response.

Product: MT5634SMI-IP

Updated: 11/17/2003 11:11:44 AM

Is the SC144HI obsolete Is the MT5600SMI-32 for replacement of the SC144H1 and is it pin to pin compatible with the SC144H1

Products: MT5600SMI-32,SC144H1

Updated: 10/23/2003 10:12:18 AM

Does the +GCI - Country of Installation command work properly on this model

Product: MT5634SMI-92

Updated: 09/30/2003 12:42:01 PM

What is the power consumption of this module during normal mode and sleep mode

Products: MT5634SMI,MT5600SMI

Updated: 09/25/2003 02:16:05 PM

I setup my modem to receive a class 2 fax, but I don't recognize the incoming data using HyperTerminal.

Products: MT2834BL,MT2834BC,MT2834BLR,MT2834ZPX,MT2834ZDXb-U,MT2834BR,MT2834LTI,MT5634ZPX,MT5634ZBA,MT5634MSV,MT5634ZPX-PCI,MT5634SMI,MT3334SMI,MT5634SMI-P,MT5634ZBA-DID,MT5634ZBA-V92,MT5634ZPX-PCI-V92,MT2834BA,MT2834ZDXb

Updated: 09/23/2003 06:32:22 PM

Does this embedded modem have voice support (AT+V commands)

Products: MT5634SMI,MT3334SMI,MT5634SMI-P

Updated: 09/11/2003 10:45:25 AM

Does the serial modem module include Billing tone detection circuitry for Germany and Switzerland Does the module contain the billing tone filter circuit

Product: MT5634SMI-92

Updated: 09/11/2003 10:45:41 AM

With XON/XOFF flow control enabled, what is the size of the transmit buffer and how full does the buffer need to be for the modem to send an XOFF character to the host

Product: MT5634SMI-34

Updated: 09/08/2003 08:49:12 AM

Does this socket modem support synchronous communications

Product: SF336D/SPH1D5

Updated: 08/14/2003 02:10:00 PM

What is the isolation voltage of your MT5634SMI-ENI-ITP socketmodem

Product: MT5634SMI

Updated: 08/06/2003 09:55:23 AM

The AT+i command set provides the means to list and retrieve E-mails using POP3 but it does not appear to provide a way to delete E-mails.

Product: MT5634SMI-IP

Updated: 08/04/2003 10:48:38 AM

Does this modem support the ITU-T V.8 standard

Products: MT5634ZPX,MT5634ZBA,MT5634MSV,MT5634ZPX-PCI,MT5634SMI,MT5634SMI-P,MT5634ZBA-DID,MT5634ZBA-V92,MT5634ZPX-PCI-V92

Updated: 08/04/2003 10:41:08 AM

I can't set the Abort Timer (S7 register) below 35.

Products: MT5634ZPX,MT5634ZBA,MT5634MSV,MT5634ZPX-PCI,MT5634SMI,MT3334SMI,MT5634SMI-P,MT5634ZBA-DID,MT5634ZBA-V92,MT5634ZPX-PCI-V92,MT3334ZDX

Updated: 08/04/2003 10:41:35 AM

I can't connect to a 3 Com modem(U S Robotics) at 1200 or 2400bps, it drops to 300bps.

Products: MT5634ZPX,MT5634ZBA,MT5634MSV,MT5634ZPX-PCI,MT5634SMI,MT3334SMI,MT5634SMI-P,MT5634ZBA-DID,MT5634ZBA-V92,MT5634ZPX-PCI-V92,MT3334ZDX

Updated: 08/04/2003 10:42:03 AM

Can I connect two phone lines to this modem

Products: MT2834BL,MT2834BC,MT2834BLR,MT2834ZPX,MT2834ZDXb-U,MT2834BR,MT2834LTI,MT5634ZPX,MT5634ZBA,MT5634MSV,MT5634ZPX-PCI,MT5634SMI,MT3334SMI,MT5634SMI-P,MT5634ZBA-V92,MT5634ZPX-PCI-V92,MT3334ZDX,MT2834BA,MT2834ZDXb

Updated: 08/04/2003 10:42:27 AM

How do we force an error correcting connection

Products: MT5634ZPX,MT5634ZBA,MT5634MSV,MT5634ZPX-PCI,MT5634SMI,MT5634SMI,MT3334SMI,MT5634SMI-P,MT5634ZBA-DID,MT5634ZBA-V92

Updated: 08/04/2003 10:42:57 AM

Can I use the MT2834BL on a 56K DDS line

Products: MT2834BL,MT2834BL,MT2834BC,MT2834BLR,MT2834ZPX,MT2834ZDXb-U,MT2834BR,MT2834LTI,MT5634ZPX,MT5634ZBA,MT5634MSV,MT5634ZPX-PCI,MT5634SMI,MT3334SMI,MT5634SMI-P,MT5634ZBA-V92,MT3334ZDX,MT2834BA,MT2834ZDXb

Updated: 08/04/2003 10:12:07 AM

Does this modem support 11 bit operation

Products: MT5634ZPX,MT5634ZBA,MT5634SMI,MT3334SMI,MT5634ZBA-DID,MT5634ZBA-V92

Updated: 08/04/2003 10:43:23 AM

Does this modem support modem on hold (MOH)

Products: MT2834BL,MT2834BC,MT2834BLR,MT2834ZPX,MT2834ZDXb-U,MT2834BR,MT2834LTI,MT5634ZPX,MT5634ZBA,MT5634MSV,MT5634ZPX-PCI,MT3334SMI,MT3334ZDX,MT2834BA,MT2834ZDXb

Updated: 08/04/2003 10:34:15 AM

Does this modem support MNP10 error correction

Products: MT224xx,MT932xx,MT1432BA,MT1932ZPX2,MT1432MU,MT1432BC,MT1432BLR,MT1432LT,MT1432BL,MT1932BL,MT1432ZDX,MT2834BL,MT1932ZPX,MT2834BC,MT2834BLR,MT1932ZDX,MT2834LT,MT2834ZPX,MT2834ZDXb-U,MT2834BR,MT2834LTI,MT5634ZLX-FE,MT56128ZLX,MT5634ZLX-E,MT5634ZPX,MT5634ZBA,MT5634MSV,MT56128ZLX-NT,MT56128ZLX-ST,MT5634ZPX-PCI,MT5634SMI,MT3400ZLX,MT3334SMI,MT5634SMI-P,MT5634ZBA-DID,MT5634ZBA-V92,MT5634ZPX-PCI-V92,MT5634ZLX,MT5634ZLX,MT3334ZDX,MT2834BA,MT2834ZDXb,MT212xx,MT3334LT

Updated: 08/04/2003 10:43:50 AM

I want to use the +VXT command(Translate Voice Data option), but I receive an 'ERROR' response.

Updated: 08/04/2003 10:44:23 AM

Does this modem support MH, MRH and MMR compression

Products: MT2834BL,MT2834BC,MT2834BLR,MT2834ZPX,MT2834ZDXb-U,MT2834BR,MT2834LTI,MT5634ZPX,MT5634ZBA,MT5634MSV,MT5634ZPX-PCI,MT5634ZPX-PCI,MT3334SMI,MT3334ZDX,MT2834BA,MT2834ZDXb

Updated: 08/04/2003 10:36:11 AM

Is there a command that indicates the fax classes that the modem supports

Products: MT5600DSVD2,MT2834BL,MT2834BC,MT2834BLR,MT2834ZPX,MT2834ZDXb-U,MT2834BR,MT2834LTI,MT5634ZPX,MT5600ZDX,MT5600BA,MT5634ZBA,MT5634MSV,MT5634ZPX-PCI,MT5634SMI,MT5600DSVD,MT3334SMI,MT5634SMI-P,MT5634ZBA-DID,MT5600BA-V92,MT5634ZBA-V92,MT5634ZPX-PCI-V92,MT5656ZDX,MT5600BL,MT3334ZDX,MT2834BA,MT5656ZDXV,MT2834ZDXb

Updated: 08/04/2003 10:44:50 AM

Does this modem support V.26 Differential PSK

Products: MT2834BL,MT2834BC,MT2834BLR,MT2834ZDXb-U,MT2834BR,MT2834LTI,MT5634ZPX,MT5634ZBA,MT5634MSV,MT5634ZPX-PCI,MT5634SMI,MT3334SMI,MT5634SMI-P,MT5634ZBA-DID,MT5634ZBA-V92,MT5634ZPX-PCI-V92,MT3334ZDX,MT2834BA,MT2834ZDXb

Updated: 08/04/2003 10:39:22 AM

Does this modem have a line problem command

Products: MT5634ZPX,MT5634ZBA,MT5634MSV,MT5634ZPX-PCI,MT5634SMI,MT3334SMI,MT5634SMI-P,MT5634ZBA-DID,MT5634ZBA-V92,MT5634ZPX-PCI-V92

Updated: 08/04/2003 10:45:13 AM

Does this modem support DID (Direct inward dialing)

Products: MT2834BL,MT2834BC,MT2834BLR,MT2834ZPX,MT2834ZDXb-U,MT2834BR,MT2834LTI,MT5634ZPX,MT5634ZBA,MT5634MSV,MT5634ZPX-PCI,MT5634SMI,MT3334SMI,MT5634SMI-P,MT5634ZBA-V92,MT5634ZPX-PCI-V92,MT3334ZDX,MT2834BA,MT2834ZDXb

Updated: 08/04/2003 10:37:40 AM

Does this modem automatically adjust to receive levels between 0 and 43 dBM

Products: MT1432PCS,MT5600DSVD2,MT1432PCSI,MT1932PCS,MT2834BL,MT2834BC,MT2834BLR,MT2834PCS2,MT2834PCS,MT2834ZPX,MT2834ZDXb-U,MT2834BR,MT1432PCS2,MT2834LTI,MT1432PCS3,MT5634ZPX,MT5600ZDX,MT5600BA,MT5634ZBA,MT5634MSV,MT5634ZPX-PCI,MT5634SMI,MT5600DSVD,MT3334SMI,MT5634SMI-P,MT5634ZBA-DID,MT5600BA-V92,MT5634ZBA-V92,MT5634ZPX-PCI-V92,MT5656ZDX,MT5600BL,MT3334ZDX,MT2834BA,MT5600ZDXV,MT5656ZDXV,MT2834ZDXb

Updated: 08/04/2003 10:35:40 AM

Does this modem work on a digital line

Products: MT2834BL,MT2834BC,MT2834BLR,MT2834ZPX,MT2834ZDXb-U,MT2834BR,MT2834LTI,MT5634ZPX,MT5634ZBA,MT5634MSV,MT5634ZPX-PCI,MT5634SMI,MT3334SMI,MT5634SMI-P,MT5634ZBA-V92,MT5634ZPX-PCI-V92,MT3334ZDX,MT2834BA,MT2834ZDXb

Updated: 08/04/2003 10:46:17 AM

Is there a way to turn off this modem remotely as a security measure

Updated: 08/04/2003 10:46:45 AM

What is the command to set the serial speed to 9600

Updated: 08/04/2003 10:48:16 AM

What is the number of the MultiTech BBS The number in the manual does not answer.

Updated: 08/04/2003 10:38:49 AM

How do you view the modem's parameters / configuration

Products: MT5634ZPX,MT5634ZBA,MT5634MSV,MT5634ZPX-PCI,MT5634SMI,MT3334SMI,MT5634SMI-P,MT5634ZBA-DID,MT5634ZBA-V92,MT5634ZPX-PCI-V92

Updated: 08/04/2003 10:32:58 AM

Does this modem support remote configuration

Products: MT2834ZDXb-U,MT5634ZPX,MT5634ZBA,MT5634MSV,MT5634ZPX-PCI,MT5634SMI,MT3334SMI,MT5634SMI-IP,MT5634ZBA-DID,MT5634ZBA-V92,MT5634ZPX-PCI-V92,MT3334ZDX

Updated: 07/30/2003 10:56:42 AM

Does this modem support line-in-use (parallel line detect)

Products: MT5600SMI,MT5634SMI-92

Updated: 07/03/2003 08:51:18 AM

Does the SocketModem support leased line operation

Products: MT5634SMI,MT5634SMI-IP,MT5634SMI-92,MT5634SMI-92,MT5634SMI-P-92,MT5634SMI-34

Updated: 05/20/2003 12:56:16 PM

We observe erratic behavior: random characters, erratic NVRAM configuration change, freezing...

Product: MT3400SMI

Updated: 12/16/2002 03:18:28 PM

I want to implement my own DAA for this modem, but it has a built in DAA, how should I proceed.

Product: SF56D/SPH0D5

Updated: 12/16/2002 03:13:25 PM

Does this modem support DTMF detection and distinctive ring

Product: MT5634SMI

Updated: 11/26/2002 10:49:48 AM

I set the module in standby / sleep mode, but I don't experience any power reduction. The developers guide has very little information.

Product: MT3334SMI

Updated: 11/04/2002 01:14:56 PM

What is the difference between the (&F and Z) commands, Is it possible to send a reset command (&F or Z) with other commands in the same line, (i.e. AT&F0E0S0=2) Is it necessary to wait some amount of time after sending a reset command

Product: MT3334SMI

Updated: 11/04/2002 01:37:33 PM

What is the UL certification file number for this modem

Products: MT2834BL,MT2834BLR,MT3400SMI,MT2834BR,MT2834MR6,MT5600ZDX,MT5600BA,MT5634ZBA,MT5634ZBA-USB,MT5634ZPX-PCI,MT5634SMI,MT5634MU,MT3334SMI,MT5600SMI,MT5600BA-V92,MT5656ZDX,MT5600BL,MT2834BA,MT2834ZDXb

Updated: 10/16/2002 01:35:28 PM

Our mobile device uses the DOS operating system. Do you have or know where I can get a DOS driver for your modem

Products: MT3400SMI,MT5634SMI,MT3334SMI,MT5634SMI-P,MT5600SMI,SC144H0,SC144H1,SC144H1-L,SC336H0,SC336H1,SC336H1-L,SC56H0,SC56H1,SC56H1-L,SF144D/SPH0D5,SF144D/SPH1D5,SF224ATF/H0D5,SF224ATF/H1D5,SF336D/SPH0D5,SF336D/SPH1D5,SF336D/SPH1DC,SF56D/SPH0D5,SF56D/SPH1D5

Updated: 10/16/2002 10:07:45 AM

Connect problems when the modem is configured to connect at 2400bps only.

Product: MT3334SMI

Updated: 10/03/2002 10:40:27 AM

Does this modem operate at 3.3 volts and the industrial temperature range

Product: MT5634SMI

Updated: 09/23/2002 12:26:00 PM

Event reporting

Product: MT5634SMI

Updated: 09/23/2002 10:56:34 AM

Can this 3.3V modem handle a 5V interface

Products: MT3400SMI,MT5634SMI,MT5600SMI,SC144H1-L,SC336H1-L,SC56H1-L