RouteFinder® Resolutions

Updated: 3/24/2009 10:12:13 AM

I'm setting up an exchange server on our LAN. Our upstream DSL vendor does spam filtering and other monitoring, etc. Is it possible to tell the RF850 to only accept SMTP traffic from a specific location (the IP of the system)

Products: RF850, RF860

Updated: 3/23/2009 1:47:45 PM

How do I backup / restore my configuration so if I have problems in the future I don't have to set everything up from scratch

Products: RF850, RF860

Updated: 3/23/2009 1:47:25 PM

How can I shutdown the RouteFinderr from the command prompt

Products: RF850, RF860

Updated: 3/23/2009 1:46:35 PM

I have a question on getting info out of Statistics and Logs. Is there a way to get the interface (WAN & LAN) charts out without access to webadmin

Products: RF850, RF860

Updated: 3/20/2009 11:36:08 AM

Do your RouteFinder products have this vulnerability 'Deficiencies in the DNS protocol and common DNS implementations facilitate DNS cache poisoning attacks'

Products: RF820, RF830, RF850, RF860

Updated: 3/20/2009 11:32:40 AM

I have an issue with the RouteFinder going out to update with a time server on the Internal(Local) network. Can we setup the RF850 to be a SNTP server for the local network Should it only be pointing to a sntp server on the Internet only

Products: RF850, RF860

Updated: 3/20/2009 11:31:38 AM

I have a question regarding PPTP and creating local client accounts. Can we use capital letters and special characters for the password

Products: RF850, RF860

Updated: 3/20/2009 11:31:19 AM

Does this RouteFinder have the functionality to export the proxy logs

Products: RF850, RF860

Updated: 3/20/2009 11:20:44 AM

Can I access the Internet through the VPN tunnel

Products: RF850, RF860

Updated: 3/20/2009 11:17:52 AM

I have a problem accessing http://support.microsoft.com when enabling the HTTP proxy on the RF850.

Products: RF850, RF860

Updated: 3/20/2009 11:24:54 AM

I would like to create two VLAN on my network, how do I grant Internet access to these VLAN through the RouterFinder 760

Product: RF760VPN

Updated: 3/20/2009 11:23:45 AM

On several of my RF600/850 using 3.34 the Self Monitor Live log has reported 'swserver not running. Restarting the process'. The log appears to indicate it is a continuing problem that it can't solve on its own.

Products: RF850, RF860, RF600VPN

Updated: 3/20/2009 11:37:08 AM

This list describes the type of information that falls into each of the 60 URL categories.

Products: RF660VPN, RF600VPN, RF650VPN, RF760VPN

Updated: 1/23/2009 11:41:17 AM

What is involved in replacing the hard drive with flash

Product: RF600VPN

Updated: 1/23/2009 11:40:01 AM

Waht are the specifications RF600VPN Compact Flash

Product: RF600VPN

Updated: 1/22/2009 3:21:18 PM

I am looking at a program to import the http logs from the RF850 and RF600 routers. Does the RouteFinder have a way to push these logs to a 3rd party in real time or in a batch mode

Products: RF850, RF860

Updated: 1/22/2009 3:21:49 PM

What format are the http logs sent in Are the http access and http deny logs in the same format

Products: RF850, RF860

Updated: 1/22/2009 4:53:42 PM

Can you verify that the RF600VPN has been replaced by the RF850VPN device.

Products: RF850, RF600VPN, RF860

Updated: 1/15/2009 5:09:45 PM

Can we add another user to Webadmin access

Products: RF850, RF860

Updated: 1/14/2009 12:56:39 PM

What's the maximum amount of memory this unit can take

Product: RF760VPN

Updated: 1/14/2009 1:24:01 PM

Is the power supply for the RF660 still available I have a dead power supply.

Product: RF660VPN

Updated: 9/24/2008 4:14:20 PM

Changed - Now is ICSA compliant.

Products: RF850, RF860

Updated: 9/24/2008 4:14:16 PM

Changed - Only saves up to 10 old log files for qmail.

Products: RF850, RF860

Updated: 9/24/2008 4:14:13 PM

Updated - New Daylight saving changes.

Products: RF850, RF860

Updated: 9/24/2008 4:14:10 PM

Added - DDNS Force Update and Log.

Products: RF850, RF860

Updated: 9/24/2008 4:14:07 PM

Improved - The Webadmin interface when loading The IPsec VPN setup page with many VPN tunnels that are already configured.

Products: RF850, RF860

Updated: 9/24/2008 4:14:00 PM

Fixed - An IPSec reconnect problem when the RouteFinder restarts and the WAN link is on PPPoE

Products: RF850, RF860

Updated: 9/24/2008 4:13:57 PM

Fixed - The 'fetchipac' process used by MRTG does not execute properly and the MRTG graphs are not displayed properly.

Products: RF850, RF860

Updated: 9/24/2008 4:13:52 PM

Fixed A Problem when seting up IP Aliases. Duplicate interface alias entries are not allowed. The problem was seen mainly with WAN2. Aliases should not be added with :0 suffix, since they are used up for High Availability.

Products: RF850, RF860

Updated: 9/24/2008 4:13:48 PM

Fixed - LAN interface traffic doesn't display correctly when High Availability is on.

Products: RF850, RF860

Updated: 9/24/2008 4:13:44 PM

Fixed - A VPN IPsec manual mode reconnect problem when WAN1 and WAN2 are used and WAN2 is on PPPoE.

Products: RF850, RF860

Updated: 9/24/2008 4:13:40 PM

Fixed - Missing entries in the HTTP access log when the URL content is enabled.

Products: RF850, RF860

Updated: 9/24/2008 4:13:37 PM

Fixed - A missing PPPoE username and password after restoring the backup configuration file.

Products: RF850, RF860

Updated: 9/24/2008 4:13:33 PM

Fixed - PPTP when using Radius.

Products: RF850, RF860

Updated: 9/24/2008 4:13:30 PM

Fixed - The script for checking VPN status in ‘fqdncheck’ to prevent IPSec configuration file corruption.

Products: RF850, RF860

Updated: 9/24/2008 4:13:25 PM

Fixed - A PPP dial backup problem.

Products: RF850, RF860

Updated: 9/24/2008 4:13:21 PM

If someone sends an email to an invalid email address at a domain, a message is sent to the sender telling them that this is an invalid email address. How many times does a Routefinder 850 send this non delivery message

Products: RF850, RF860

Updated: 9/24/2008 4:13:04 PM

Does the VPN on the RF850 use SHA or MD5 encryption.

Products: RF850, RF860

Updated: 9/24/2008 4:14:38 PM

We have more than 300 PPTP accounts setup for users to access our system remotely. How can I disconnect a user / users from the system should it become necessary

Products: RF600VPN, RF660VPN

Updated: 9/2/2008 3:12:58 PM

What is the procedure for setting up two MultiTech RF860 firewalls in redundant mode

Product: RF860

Updated: 9/2/2008 3:13:17 PM

Where do I go on the RF860 to show a live log of all traffic going in and out of the WAN Port

Product: RF850

Updated: 8/22/2008 10:20:29 AM

What are the prerequisites required to configure load balancing When I enable load balancing none of the Internet connections work.

Product: RF850

Updated: 7/23/2008 2:49:34 PM

Is it possible to look at the entries in a 'black lists' of the spam filter as a text file

Products: RF850, RF860

Updated: 7/23/2008 1:12:26 PM

Is the URL filter smart enough to look for wild cards, ie http://facebook.com rather than www.facebook.com

Products: RF850, RF820, RF830, RF860

Updated: 7/17/2008 1:34:58 PM

We want to swap two firewalls, one being an active RF850 with settings that we want to have exist on an RF860. Is it possible to save the configuration and import them to the other firewall

Products: RF850, RF860

Updated: 7/15/2008 3:58:00 PM

What files/directory on the RouteFinder has the user/system parameters used for creating a PPTP connection

Product: RF660VPN

Updated: 6/4/2008 1:24:10 PM

Is it possible to create a VPN tunnel between a RouteFinder at our corporate location and the router of one /a few employees at their homes Could this be done using a VPN Server in PPTP mode

Products: RF820, RF830, RF850, RF860

Updated: 6/26/2008 3:13:21 PM

I would like to see if the router is getting fragmented packets.

Products: RF850, RF860

Updated: 6/18/2008 1:30:52 PM

Does a flashing status lite mean something is wrong

Products: RF830, RF820, RF850, RF860

Updated: 6/16/2008 3:38:01 PM

Please give me a list of RouteFinders that have support for UPnP.

Products: RF820, RF830, RF850, RF860

Updated: 6/11/2008 10:51:58 AM

Is there any way of increasing the maximum mail size in the RF860

Product: RF860

Updated: 6/11/2008 10:18:04 AM

We are changing to RF830-AP routers. We have a few sites using ADSL DHCP with dynamic IP addresses, also using DDNS (dyndns.org). Can we connect these sites via VPN, using their dyndns name

Products: RF830-AP, RF820, RF830, RF850, RF860

Updated: 6/11/2008 11:14:52 AM

I have multiple mobile users trying to PPTP into the same RF600. Problems seem to happen when they are coming from the same IP. Is there any way to allow multiple PPTP users originating from the same IP

Product: RF600VPN

Updated: 5/9/2008 2:44:45 PM

I just bought an RF860 and wanted to know if there is a way for me to configure the router to use a cable connection for all downloads and our dedicated T1 for uploads

Product: RF860

Updated: 5/8/2008 7:03:44 PM

Does the RF8xx support QoS

Products: RF860, RF830, RF820, RF850

Updated: 5/29/2008 9:35:35 AM

Connection is not working, do I have to add packet filters to accept PPTP

Product: RF850

Updated: 5/27/2008 1:07:49 PM

Is there a way to get the arp table on the RF850

Product: RF850

Updated: 5/27/2008 1:07:28 PM

Can we assign each PPTP user a dedicated IP address

Product: RF850

Updated: 5/27/2008 1:07:25 PM

What does all mean in encryption strength

Product: RF850

Updated: 5/16/2008 3:28:26 PM

How do I open a port, say 5900 to allow us to access a customers network (via a vpn) to perform remote maintenance

Product: RF600VPN

Updated: 5/15/2008 1:46:58 PM

When I upload a saved configuration does it replace / overwrite everything Does it make an exact duplicate of the router config that was saved

Product: RF850

Updated: 5/15/2008 1:52:09 PM

Can the DMZ port be configured as another incoming WAN interface

Product: RF650VPN

Updated: 5/13/2008 1:08:19 PM

Roucon crashes when clicking on statistics through TFTP.

Product: MTASR3-200

Updated: 4/4/2008 3:28:52 PM

How many PPTP connections are available on the RF850

Product: RF850

Updated: 4/4/2008 3:28:36 PM

We've successfully been using the RF850VPN as our firewall. I am trying to clean up some old networks that are no longer used and have a problem trying to delete them.

Product: RF850

Updated: 4/4/2008 3:28:07 PM

How do I clean out all the mail queus and errors

Product: RF850

Updated: 4/30/2008 10:08:30 AM

How do I add more users/password/change password for ssh

Product: RF850

Updated: 4/29/2008 3:22:21 PM

How do I read the sargfile-xxx that are emailed to me from the RF850 Routefinders

Product: RF850

Updated: 4/25/2008 3:05:54 PM

We need to detect which station on our LAN is generating unsolicited traffic (Port 25), because we are being included in SPAM HOUSE. What procedure do you suggest to pinpoint the station(s) producing the undesired traffic

Product: RF860

Updated: 4/22/2008 10:12:26 AM

We have an RF850 with DHCP turned on for the LAN. It works great for handing out IP addresses as well as gateway information, but does not hand out DNS information.

Product: RF850

Updated: 2/27/2008 1:36:49 PM

Users can browse http pages, but not https.

Product: RF850

Updated: 2/18/2008 8:32:01 AM

I have an RF850 main router with two private networks behind it, and connect three IPSEC VPNs with RF820 routers from across the internet. How do I route traffic from one remote network to another through the main RF850

Products: RF820, RF850

Updated: 12/12/2008 3:11:50 PM

We had purchased SSH Sentinel with our RF850 last year and I noticed that I cannot find this software on your site anymore. Has Multitech discontinued this product

Products: RF850, RF860

Updated: 12/12/2008 2:52:29 PM

We need to switch to an IPv6 option, are the RouteFinder's able to do that

Products: RF850, RF860, RF820, RF830

Updated: 12/12/2008 3:14:38 PM

How do I determine the connection speed and duplex of the ports on an RF600 running 3.25 software

Product: RF600VPN

Updated: 10/7/2008 1:45:50 PM

How do I block an entire domain of email into the router SMTP proxy

Products: RF850, RF860

Updated: 10/27/2008 7:51:44 PM

Does this RouteFinder support SNMP

Products: RF820, RF600VPN, RF650VPN, RF660VPN, RF830, RF850, RF860, RF760VPN

Updated: 10/23/2008 2:39:56 PM

Is there a module in the RF860 where we can track/record changes in configurations

Products: RF860, RF850

Updated: 10/23/2008 2:40:06 PM

The Statistics & Logs -> Hardware and Network reports are not generating any longer. The statistics were last updated: Monday, 13 March 2006 at 05:10:19 PM

Product: RF760VPN

Updated: 1/9/2008 4:39:35 PM

Is there a log file wherein we can check what sites the users are accessing and errors encountered

Product: RF850

Updated: 1/9/2008 4:39:26 PM

Can we impose a single logon Meaning if the user is already logon, he/she cannot logon again to another workstation.

Product: RF850

Updated: 1/9/2008 3:32:21 PM

Is there a way to view the ipsec / ike live log info from the ssh interface

Product: RF850

Updated: 1/8/2008 4:42:24 PM

Is there a file I can ssh into and vi to add items into the 'Bad Patterns in Sender/Recipient Address' list and then recompile Same question about the 'Message Filtering' 'Filter Based on Message Expressions'

Product: RF850

Updated: 1/31/2008 1:57:54 PM

How do I flush the proxy cache

Product: RF860

Updated: 1/31/2008 1:57:50 PM

We have created a denied list for URL's; however, it does not block https requests to that URL. How do we block SSL requests to the same URL

Product: RF860

Updated: 1/31/2008 1:56:42 PM

How can I edit by console to add a network in webadmin access

Product: RF850

Updated: 1/17/2008 1:59:42 PM

How to manually update the RF850 / RF860

Products: RF850, RF860

Updated: 1/16/2008 10:52:45 AM

Can this box act as a DNS server

Product: RF850

Updated: 1/15/2008 11:14:48 AM

I see the new 800 series offers failover and load balancing with the 2 WAN ports. Is this also possible with VPN Could 2 tunnels be created between 2 RF860 routers giving fail over and load balancing within the VPN tunnel

Products: RF850, RF860, RF830

Updated: 9/7/2007 8:13:04 AM

We want to use an RF760 for caching purposes only. The RF760 has 3.32 firmware.

Product: RF760VPN

Updated: 9/7/2007 8:12:58 AM

With root access, how can I view and flush arp entries in the RF660

Product: RF660VPN

Updated: 9/7/2007 8:12:36 AM

How do I setup the RouteFinder to allow the Blackberry to get email from our email server

Product: RF660VPN

Updated: 9/7/2007 10:52:53 AM

What is the command used to verify the amount of memory in a unit

Product: RF600VPN

Updated: 9/7/2007 8:13:07 AM

We have a minor annoyance with Mozilla Web browsers opening up different Multitech routers in succession. IE7 gives a certificate error, but allows us to continue. We have to restart Mozilla in order to choose a different Multitech router.

Product: RF600VPN

Updated: 9/6/2007 2:55:08 PM

Does this RouteFinder have an HTTP cache

Products: RF850, RF860

Updated: 9/28/2007 8:53:30 AM

Could you point me to a guide for setting up the VPN client w/a dynamic IP address (sometimes behind NAT, other times not) with an RF860

Products: RFIPSC2, RF860

Updated: 9/24/2007 1:53:41 PM

How do I get realtime log views while in the console

Product: RF850

Updated: 9/21/2007 12:03:00 PM

I got my RF860 few days ago. Could you give me some ideas how to block msn messenger and yahoo messenger.

Product: RF860

Updated: 9/21/2007 12:03:52 PM

Can I connect a VPN to a network with the IP range of 192.168.1.xxx if I already have a connection to another VPN with that same remote LAN IP range (192.168.1.xxx)

Product: RF660VPN

Updated: 9/18/2007 12:00:30 PM

How to block IM or P2P protocols.

Products: RF660VPN, RF850

Updated: 9/12/2007 2:14:44 PM

Does the RF820 have the ability to have multiple IPSEC client entries and allow only one client at a time to connect The 2 people would not be connecting at the same time.

Products: RF820, RFIPSC2

Updated: 9/12/2007 2:15:23 PM

We are having a tough time controlling SPAM. We use Exchange, but only route POP3 email through it to users inboxes. We are not hosting our own email. Will your SPAM filter on the Multitech RF850 work for this type of setup

Product: RF850

Updated: 9/12/2007 2:15:15 PM

What is the root password

Products: RF850, RF860

Updated: 9/12/2007 2:15:06 PM

Can the IDS features be broken down and reported to pager or cell phone vs. only to email

Product: RF850

Updated: 9/12/2007 2:14:24 PM

Is there a method of creating a list of users who can access ALL sites and another who are limited to a specific list

Product: RF850

Updated: 9/12/2007 2:14:38 PM

I have an RF660 that I would like to monitor what each computer on my network is using for bandwidth. Is there any option on the RF660 to accomplish this

Product: RF660VPN

Updated: 9/12/2007 2:14:52 PM

How do I reset the password via command

Product: RF600VPN

Updated: 8/31/2007 8:32:12 AM

I want to know if the command /etc/multiconf/scripts/bkupmain importbkp default can be used with a hard disk, because I wrote it in a RF660VPN with flash memory.

Product: RF660VPN

Updated: 8/3/2007 11:19:34 AM

Can you authenticate a PPTP connection on an 850/860 to 2003 Active Directory

Products: RF850, RF860

Updated: 8/28/2007 6:01:41 PM

To clear all logs including accounting and graphics.

Product: RF600VPN

Updated: 8/23/2007 8:59:52 AM

I could not get 1.5 gig to work in the RF850. It is seen by the cmos, but not by any of the Multi-Tech utilities.

Products: RF850, RF860

Updated: 8/23/2007 9:01:53 AM

I have questions on the administrator Low Disk space alert. When does it trigger Is it possible to change this value

Product: RF850

Updated: 8/23/2007 9:03:50 AM

Can the RouteFinder be configured via the serial port

Product: RF850

Updated: 8/23/2007 9:04:17 AM

Is it possible to proxy by username and password for HTTP traffic or is it only by network

Product: RF850

Updated: 8/23/2007 9:01:09 AM

How do I setup PPTP so multiple concurrent users can connect to the router

Product: RF660VPN

Updated: 8/23/2007 9:03:55 AM

I have customers connected to my RF600 via several RF560VPNs. I deleted the Packet filter rule for one of them and I was still able to ping myself from their network. If the packet filter is not on, shouldn't that prevent them from seeing my network

Product: RF600VPN

Updated: 8/23/2007 9:04:38 AM

I got my 3.25 firewall update installed via CD and it worked. However, I started the update to 3.32, but when the updates were finished, it rebooted & proceeded to hang upon running LILO.

Product: RF600VPN

Updated: 8/23/2007 9:04:42 AM

How can I configure my RASFinder software to communicate with COM rather than over IP

Product: MTASR3-200

Updated: 8/22/2007 11:04:10 AM

Im trying to setup PPTP on an RF600 to support more than 1 concurrent user, but if 1 person is connected no one else can. Must I run it through a Radius server for this to work Does an RF820 support more than one concurrent pptp logon

Products: RF600VPN, RF820, RF830

Updated: 8/2/2007 9:38:35 AM

How do I get the VPN live logs to display the status

Product: RF850

Updated: 8/15/2007 3:46:31 PM

We have a customer who requires an Internet security appliance that can handle 500 users. Out of 500, 200 will be VPN clients (PPTP)

Product: RF860

Updated: 7/6/2007 8:58:55 AM

What port does PPTP use

Product: RF860

Updated: 7/6/2007 8:59:09 AM

Can mobile users (remote laptops) that connect to the RF830 or RF850 through a VPN tunnel display the shared hosts on the LAN by using 'My Network Places' or 'View Workgroup Computers'

Products: RF830, RF850

Updated: 7/6/2007 8:59:06 AM

Can mobile users (remote laptops) that connect to the RF830 or RF850 through a VPN tunnel locate a resource (a server) on the LAN using the UNC instead of the IP address of the resource

Products: RF830, RF850

Updated: 7/6/2007 8:58:46 AM

Does the RouteFinder support RGP

Products: RF600VPN, RF550VPN, RF560VPN, RF650VPN, RF660VPN, RF760VPN, RF820, RF830, RF850, RF860

Updated: 7/6/2007 8:59:21 AM

We are upgrading from VPN 560’s for our clients and we cannot administer the router remotely without first connecting a VPN. Is this a new security feature

Products: RF560VPN, RF550VPN, RF600VPN, RF650VPN, RF660VPN, RF760VPN, RF820, RF830, RF850, RF860

Updated: 7/26/2007 8:53:25 AM

Here are steps to perform a live update:

Product: RF850

Updated: 7/13/2007 8:12:24 AM

How do I use RSA Secure ID with the MTASR3

Product: MTASR3-200

Updated: 7/11/2007 1:56:46 PM

Does this RouteFinder support L2TP

Products: RF600VPN, RF560VPN, RF820

Updated: 6/29/2007 10:33:09 AM

It appears that only one person per IP address is able to PPTP into the RF660, is this correct Can it be increased Do the same rules apply for an IPSec connection I'm talking about an individual ipSec, not the IPSec between other Multitech's.

Product: RF660VPN

Updated: 6/28/2007 4:01:01 PM

I can't access Microsoft shares via an IPSEC tunnel to the computers behind the firewall. Do I need to do something with packet filtering

Product: RF860

Updated: 6/28/2007 4:00:37 PM

I have 2 new RF860s setup for high availability, is there a log that shows sync status

Product: RF860

Updated: 6/28/2007 4:01:18 PM

If we configure the SMTP proxy in the RF660, does it store the incoming mail or only distribute it

Product: RF660VPN

Updated: 6/21/2007 3:11:52 PM

What models of the RouteFinder use the same firmware

Products: RF820, RF830, RF600VPN, RF660VPN, RF760VPN, RF850, RF860

Updated: 6/21/2007 3:10:57 PM

We plan to upgrade from DSL to a partial T1. I know Cisco units typically require an expansion card, but does this particular model require something along those lines or will it handle the connection out of the box

Product: RF600VPN

Updated: 6/21/2007 3:11:29 PM

If I feed the WAN port on my RF500S with 8Mb/s how much can I expect to get out of the LAN-port

Products: RF500S, RF820

Updated: 6/13/2007 1:27:53 PM

How can I see the amount of disk space remaining for logs on the RF860 from the Web interface

Product: RF860

Updated: 6/13/2007 1:28:11 PM

We have a mail server for aaa.com using SMTP proxy on an RF860. The DNS check tool shows a lot of timeouts for the RF860 running mail proxy. Why is the RF860 so sluggish

Product: RF860

Updated: 6/13/2007 1:28:00 PM

Please advise on the quarantine option when we forward the quarantine to an email address. How do we actually view the quarantined email when we open a quarantined item

Product: RF850

Updated: 6/13/2007 1:28:04 PM

What is the firewall bandwidth capacity of the RF850VPN and RF860VPN Can they manage a full duplex 100 Mbps line

Products: RF850, RF860

Updated: 6/13/2007 1:28:08 PM

How does the RF560 compare to a Cisco PIX firewall

Products: RF560VPN, RF820, RF850

Updated: 6/13/2007 1:28:24 PM

Does the RF830 have IDS like the RF850

Products: RF830, RF820, RF850

Updated: 6/13/2007 1:27:49 PM

How can I setup RF660’s PPTP to use my Microsoft windows 2003 server Radius server to authenticate VPN client.

Product: RF660VPN

Updated: 6/13/2007 1:27:57 PM

Is it possible to use the Cisco VPN Client with the (IPSec VPN) RF660

Products: RF660VPN, RF550VPN, RF560VPN, RF600VPN, RF650VPN, RF760VPN

Updated: 6/13/2007 1:28:28 PM

What is the default IP address assigned to the ethernet port

Product: MTASR3-200

Updated: 6/12/2007 3:20:38 PM

Does this RouteFinder support LDAP authentication from a Windows 2003 ADS for VPNs

Product: RF760VPN

Updated: 6/12/2007 1:48:28 PM

How to enable and setup basic Spam filtering:

Products: RF660VPN, RF850, RF600VPN

Updated: 5/8/2007 3:13:24 PM

We have offices connected to the Internet using DSL service (PPPoE) from the ISP and when the connection fails there is no body there to cycle power to the DSL modem. What Router should I use to get the reconnection when the ISP has been detected

Products: RF850, RF820, RF830, RF860

Updated: 5/8/2007 3:13:30 PM

Can you tell me where the DNS is stored I would like to SSH in and change the file.

Product: RF600VPN

Updated: 5/8/2007 3:13:21 PM

I have noticed on our mail server that we are getting some mail rejected with errors like this '450 Client host rejected: cannot find your hostname, [xx.xx.xxx.xxx]'.

Product: RF600VPN

Updated: 5/4/2007 10:09:31 AM

Is there a way using the RF850 to activate a VPN tunnel based on the time of day and day of the week

Product: RF850

Updated: 5/4/2007 10:09:25 AM

I have an RF600 and the log is not getting updated.

Product: RF600VPN

Updated: 5/31/2007 4:09:53 PM

Is it possible to remove or increase the email size limit for the SMTP Proxy

Product: RF850

Updated: 5/31/2007 4:10:45 PM

I'm using an RF600 as a master IPSEC VPN router and I have 15 remote RF560's. Tunnels work great connecting to the network the master is on from all locations, but I can't get from a remote location through the master VPN to another remote location.

Products: RF600VPN, RF560VPN

Updated: 5/31/2007 4:10:40 PM

My RouteFinder helohost file says xx.xxx.xxx.xxx CBL is saying that it should be hostname of the mail server. Can I edit it this setting with winscp or do I need to go in with putty to change it

Product: RF600VPN

Updated: 5/31/2007 4:10:16 PM

I want to try the local install procedure. I'm able to ftp the new ISO image to the RouteFinder but not to the root '/' directory. I receive a permission denied message. How do I login as 'su' to move the ISO file to the root '/' directory

Product: RF600VPN

Updated: 5/31/2007 4:10:53 PM

My RasFinder MTASR3-200 needs to be re-set but I have lost the password. I have the the Ras box and the command cable, How do I reset the Web password so I can configure it over our Intranet

Product: MTASR3-200

Updated: 5/2/2007 1:34:50 PM

Can the RouteFinder block the downloading of files with extensions EXE or MPG

Product: RF660VPN

Updated: 5/2/2007 9:14:44 AM

I have a RouteFinder, which has the firmware 3.32. and it has a new option QoS, how does it work

Product: RF660VPN

Updated: 5/18/2007 9:34:20 AM

Where do I enable the PPTP pass through for the RF660

Product: RF660VPN

Updated: 5/18/2007 9:34:01 AM

I need to establish a VPN between 2 sites. The VPN, made with RF560s, needs to let Multicasts go thru.

Products: RF560VPN, RF600VPN, RF650VPN, RF660VPN, RF760VPN

Updated: 5/11/2007 4:11:38 PM

Is the RF850 turning on DiffServ on the packets going out of the router in order to enable outside routers to forward the traffic with a higher priority Our T1 provider prioritizes these packets if they are flagged as such.

Product: RF850

Updated: 5/11/2007 4:10:42 PM

I am setting up VPN Failover with vers 3.31 on a RF660. My question is regarding the configuration of Dynamic DNS for WANLink1 & WANLink2, is the Dynamic DNS settings for both WANLink1 & WANLink2 going to be the same

Product: RF660VPN

Updated: 5/11/2007 4:12:13 PM

I have an RF650VPN and I want to give my LAN users the ability to surf the Internet, but to only 5 websites. No users can access any other website. What should i do

Product: RF650VPN

Updated: 5/11/2007 4:12:17 PM

Could you please tell me the difference between an RF600 & an RF850

Products: RF850, RF600VPN

Updated: 5/10/2007 3:39:28 PM

Does this RouteFinder support Universal Plug and Play (UPnP)

Products: RF102S, RF660VPN, RF830

Updated: 4/9/2007 5:37:55 PM

May I restrict the type of files that can be downloaded from the Internet using HTTP (i.e. exe, pif)

Products: RF600VPN, RF660VPN

Updated: 4/27/2007 2:11:11 PM

I've been having some email delays and in some instances undeliverable email over the last several weeks. My problem has been on both in-bound and out-bound delivery. I've done the same test on the actual internal email server with no delays.

Product: RF850

Updated: 4/26/2007 2:03:40 PM

Does the software license allow the same license key to be installed on 2 computers The two computers will never be in use at the the same time, I want to access the lan via my PC when I'm at home, and also via a laptop when I'm on the road.

Product: RFIPSC2

Updated: 4/26/2007 2:03:37 PM

Is it possible to use the backup of an RF660 to be installed on an RF850

Product: RF850

Updated: 4/26/2007 11:16:39 AM

How do I define a range of ports, say from UDP port 10000 to UDP port 20000 It is impossible for me to define each port , say 10000, 10001, 10002, etc.

Product: RF660VPN

Updated: 4/26/2007 11:16:36 AM

I have an RF660 running 3.12 connected to an RF600 running 3.25 with an IPSec VPN. Shortly after we start a telnet or ssh session inside the tunnel the application freezes and cannot be restarted.

Products: RF660VPN, RF600VPN

Updated: 4/23/2007 9:07:22 PM

How can I trace a message through the SMTP proxy to confirm receipt and delivery

Product: RF860

Updated: 4/23/2007 8:54:49 AM

I have created a packet filter rule for ftp access for a server behind an RF600 but connectivity is not achieved. The error code is 10060. Is there another setting required

Product: RF600VPN

Updated: 4/23/2007 8:55:13 AM

I have a RouteFinder and I need to Block https pages like (webmessenger.msn.com , e-buddy.com, MSN etc). How can I block these pages

Product: RF600VPN

Updated: 4/19/2007 8:04:04 AM

How many concurrent sessions How many concurrent VPN tunnels What is the firewall throughput

Product: RF860

Updated: 4/19/2007 8:04:29 AM

Do you have a faq on how to load an RF660 with flash Can I use a flash drive purchased from a retail store

Product: RF660VPN

Updated: 4/16/2007 1:35:52 PM

I have an RF860 that we are not able to browse to https://xxx.xxx.xxx.x, but we are able to ssh into and all inbound/outbound traffic is working. Is there a command (service webadmin restart) to restart the ssl connection without rebooting the ISA

Product: RF860

Updated: 4/16/2007 1:35:43 PM

I've got a requirement for the RF850, where the location that the firewall will reside in has no mains power, but does have 12VDC. I see the input to the RF850 is 12vDC. What are the pin outs and power consumption

Product: RF850

Updated: 4/16/2007 1:35:04 PM

How can I upgrade these RouteFinders

Products: RF850, RF830

Updated: 4/16/2007 1:34:39 PM

What does this error message mean 'WARNING: cannot connect to members.dyndns.org:80 socket: IO::Socket::INET: Timeout'

Product: RF850

Updated: 4/16/2007 4:53:18 PM

We have a RF660 version 3.25. Can you confirm that DHCP Relay will work through an IPSec tunnel on this device

Product: RF660VPN

Updated: 4/16/2007 1:36:03 PM

One of our clients wants to increase the DSL speed. Bell South is asking if our RF660 is compatible with multiple PVCs

Product: RF660VPN

Updated: 4/16/2007 1:35:16 PM

Can I have Activated both IPSec and PPTP on the RouteFinder without any problems

Product: RF660VPN

Updated: 4/16/2007 1:48:34 PM

Besides setting the router to factory defaults, is there any way to log into the console and set the web admin password

Product: RF600VPN

Updated: 4/16/2007 1:35:24 PM

If I go to intrusion detection live log, I see a lot of log´s from an IP trying to get inside my RF600. How can I add the IP to the black list to prevent intrusion attempts in my firewall

Product: RF600VPN

Updated: 4/16/2007 1:34:57 PM

I lost the root password, how can I recover it

Product: RF600VPN

Updated: 4/16/2007 1:34:53 PM

Can you send me an image of 3.31 for the RF600 / RF660 flash disks

Products: RF600VPN, RF660VPN

Updated: 4/16/2007 1:20:37 PM

We want to install an MASR3-200 box for a RAS server application. Besides user name / password and dial backup security features is it possible to use MAC address authentication of the remote incoming user

Product: MTASR3-200

Updated: 3/28/2007 9:35:13 AM

Upon upgrading to version 3.11, the cron daemon was not restarted resulting in cron jobs not being executed.

Product: RF660VPN

Updated: 3/28/2007 9:29:32 AM

Is it possible to get a log of other protocols besides http traffic (i.e. kazoo)

Product: RF660VPN

Updated: 3/28/2007 9:24:33 AM

If I have an RF660 connected to the Internet via an ADSL modem with a backup modem connected with a dial up Internet service. Will the RF660 send a mail notification to the system administrator stating that the backup modem has been activated

Product: RF660VPN

Updated: 3/28/2007 10:09:57 AM

I am getting lots of port scanning notifications, what can I do the stop them

Product: RF650VPN

Updated: 3/28/2007 10:08:10 AM

I need to allow ports 8081 and 7755 to the entire private subnet, Is there any way to do this

Product: RF650VPN

Updated: 3/28/2007 9:58:49 AM

How to restart after adding crontab.xxx jobs:

Product: RF650VPN

Updated: 3/28/2007 9:45:49 AM

Since I enabled the email notification for invalid web & ssh logins, I have been receiving more than 2000 emails like the following from root@rf600vpn.ampco.com warning me from the invalid login attempts.

Product: RF600VPN

Updated: 3/28/2007 9:44:37 AM

I have a website internal on port 80, I can port forward from an external IP from port 880 to 80. However, I want to use SNAT so www.xxx.com:880 from internal will resove to the right machine but hit it at port 80, how do I do this

Product: RF600VPN

Updated: 3/28/2007 9:43:35 AM

Fixed - A non-transparent HTTP proxy and authentication problem.

Products: RF600VPN, RF660VPN, RF760VPN

Updated: 3/28/2007 9:40:58 AM

Added - More logging due to ICSA requirements. Now has ICSA Firewall Certification.

Product: RF600VPN

Updated: 3/28/2007 10:07:22 AM

I'm having trouble using the Voice feature in MSN. It's working fine within the LAN, but it's not working when trying to communicate over the Internet. Is there some port I have to open

Product: RF500S

Updated: 3/28/2007 10:03:50 AM

Can I use a DSL device that has a USB connector

Product: RF500S

Updated: 3/28/2007 9:58:05 AM

How do I setup RouteFinders as routers to route IP traffic between two LANs using an Async port

Product: RF500S

Updated: 3/28/2007 9:53:31 AM

Enter more than six entries in the Pass filter list

Product: RF500S

Updated: 3/21/2007 3:02:45 PM

Is it possible to change the MTU values of the RF850

Product: RF850

Updated: 3/2/2007 10:08:23 AM

Can you explain the + - functionality in the QOS options

Product: RF850

Updated: 3/2/2007 10:10:05 AM

Do we need to install any patches on our RouteFinders to take care of the 2007 changes on the Start/End of Daylight savings time

Products: RF550VPN, RF560VPN, RF600VPN, RF650VPN, RF660VPN, RF760VPN, RF820, RF830, RF850, RF860

Updated: 2/7/2007 3:16:46 PM

The HTTP log files that used to be available on the hard drive based RouteFinders we're much larger than the new flash based units. Is there a method to stream data to an external device for analysis reports for longer periods.

Products: RF850, RF860

Updated: 2/7/2007 3:06:58 PM

We have an RF660 / 3.31 (using the Compact Flash drive) with 128Mb of memory installed. Can we improve performance, i.e., VPN thru-put by increasing the amount of RAM We use the RF660 for only Internet & VPN access no URL filtering, or anti-virus.

Product: RF660VPN

Updated: 2/7/2007 3:08:35 PM

Does the content filtering in the RouteFinder have any antivirus signatures in it Is the antivirus in the Routefinder only for email

Product: RF600VPN

Updated: 2/7/2007 3:15:45 PM

When we look at the HTTP Access Logs (under Statistics and Logs), we notice it only keeps 10 days worth. How do we increase this period

Product: RF600VPN

Updated: 2/7/2007 3:10:18 PM

How do you setup the POP3 anti spam filtering on RF600VPN

Product: RF600VPN

Updated: 2/7/2007 3:09:25 PM

What script do I run from SSH to restore a saved backup .zip file

Product: RF600VPN

Updated: 2/22/2007 10:09:22 AM

How to restore factory defaults from a command line.

Products: RF660VPN, RF600VPN, RF850

Updated: 2/16/2007 9:26:51 AM

I can't access the RouteFinder though the LAN port and I can access only by the console. I have restarted the system using the command line parameters but It doesn't work. What can I do to make it work

Product: RF850

Updated: 2/15/2007 8:59:39 AM

Can I use the internal modem to dial directly into the RouteFinder and configure it remotely

Product: RF860

Updated: 12/7/2007 3:08:21 PM

I have set up a DNAT to forward port 80 to an internal server, but it's not working. - DM4 = 10.151.88.33 - I have the DNAT entry as WAN -> HTTP -> DM4 -> HTTP - Is there anything additional I need to do

Product: RF860

Updated: 12/7/2007 3:08:11 PM

I have added extensions in the attachment filtering, wmv, wma, mpg, avi. and the attachments are still coming through. Besides enabling message filtering, what else do I need to do

Product: RF860

Updated: 12/7/2007 3:07:56 PM

I have an RF850 and several RF820s connected to the RF850 via IPSEC tunnels. I would like to be alerted when the tunnel from a particular firewall goes down. Is there a way to do this and then to look at a log to see what is happening

Products: RF850, RF820

Updated: 12/28/2007 9:56:27 AM

How do I setup this box as an http proxy server

Product: RF860

Updated: 12/21/2007 12:49:19 PM

How can I attempt SSH access

Product: RF850

Updated: 12/21/2007 12:43:11 PM

I have connected directly to a cable modem with a 15M download speed. Through our RF550VPN router we only get around 4M. What router would utilize the whole 15M

Products: RF550VPN, RF820, RF850

Updated: 12/21/2007 12:49:54 PM

Can the RF660VPN be used as a client to make a site to site connection to another IPSec box Can the other box be something other than a Multi-Tech box

Product: RF660VPN

Updated: 12/21/2007 12:43:04 PM

How much memory does the RF660, RF760 and RF850 have

Product: RF660VPN

Updated: 12/13/2007 12:19:57 PM

Does the antivirus for pop3 and SMTP work in both directions, incoming and outgoing

Product: RF600VPN

Updated: 12/11/2007 1:58:14 PM

Does this appliance support NAT-T (NAT Traversal)

Product: RF600VPN

Updated: 11/30/2007 2:24:31 PM

Authentic networks, blocked networks and Minimum Mail Size to Bypass POP3 Virus / Spam Filtering (KBytes). What do each of these options effect.

Product: RF850

Updated: 11/30/2007 3:27:29 PM

How do I change the MAC address for an RF850 or RF600

Products: RF850, RF600VPN, RF650VPN, RF660VPN

Updated: 11/26/2007 2:33:10 PM

Can the RF600 run syslog though the WAN port

Product: RF600VPN

Updated: 11/20/2007 10:58:43 AM

A lot of spam blockers are using a whitelist with auto verify option. Is there a way to have the spam filter verify an email

Product: RF850

Updated: 11/20/2007 10:58:40 AM

What is the hardware difference between the RF850 and RF860

Products: RF850, RF860

Updated: 11/1/2007 9:40:28 AM

How do we update the security certificate for web administration This is the error I am getting in Firefox, a pop up error:

Product: RF850

Updated: 11/1/2007 9:42:24 AM

How can we change the numeric value of spamassassin to a higher number

Product: RF760VPN

Updated: 10/16/2007 4:50:43 PM

Where are the config files for PPTP on a RF760

Product: RF760VPN

Updated: 10/10/2007 4:30:49 PM

The IDS and all other reports are being blocked by our ISP. I know where I can change the host name, but can I change the 'root' user name to something like rthomas So the email would 'appear' to come from rjohnson@xxxx.com

Product: RF850

Updated: 1/4/2007 2:47:48 PM

Our RouteFinder 600VPN has a warning in the kernel log file. Apr 3 12:19:22 routefinder pppd[26637]: Warning - secret file /etc/ppp/chap-secrets has world and/or group access. Should we be alarmed

Product: RF660VPN

Updated: 1/4/2007 9:07:50 AM

To clear all logs, accounting and graphics, execute this command:

Product: RF600VPN

Updated: 1/4/2007 9:07:47 AM

I have URL filtering running on a RF600 and on one occasion the ISP's DNS went down and Internet service slowed to a crawl. By changing the DNS or turning off filtering I got the Internet speed back. Does the RF use the DNS in the filtering process

Product: RF600VPN

Updated: 1/4/2007 4:14:36 PM

Could you explain how to configure the RAS to get access to my units.

Product: MTASR3-200

Updated: 1/26/2007 2:58:52 PM

Does the RF850 have SPAM Filtering, Content Filtering and URL Filtering

Product: RF850

Updated: 1/23/2007 4:19:19 PM

We use 'Network Group' to setup a group called 'WebUsers' and put some users in the group for Internet access. Everything works fine, but if we remove a user from the 'WebUsers' group, this particular user can still have access to the Internet.

Product: RF660VPN

Updated: 1/23/2007 4:18:24 PM

Can I get a link to the 3.31 software

Product: RF600VPN

Updated: 1/23/2007 4:22:55 PM

Is it possible to add a user other than supervisor that can view logs for audit purposes

Product: MTASR3-200

Updated: 1/2/2007 1:22:23 PM

Is the quarantine log a circular list What is its capacity

Product: RF660VPN

Updated: 1/2/2007 1:22:34 PM

I have a problem, if I disable the DHCP option(Check box), then it is not assigning an IP address to some of the clients.

Product: RF600VPN

Updated: 1/12/2007 9:03:23 AM

In a scheme of a Central Node (A) and two Remote Nodes (B,C), to build tunnels IPSec between B to A and C to A. . Is it possible to bridge in Central Node in order to communicate B and C

Products: RF820, RF830, RF850

Updated: 9/29/2006 2:18:44 PM

After putting in entries on Network Setup page for Public IP Gateway, I get a different number displayed on the Networks & Services Page.

Product: RF850

Updated: 9/22/2006 10:39:50 AM

Added - Support for DDNS failover when dual WAN load balancing is enabled.

Products: RF850, RF860

Updated: 9/22/2006 10:41:09 AM

Added - Support for VPN failover when dual WAN load balancing is enabled.

Products: RF850, RF860

Updated: 9/22/2006 10:43:40 AM

Added - A new option to configure MTU values for PPPoE connections.

Products: RF850, RF860

Updated: 9/22/2006 1:25:50 PM

Is there a way to see how much traffic flows down the VPN(s)

Product: RF600VPN

Updated: 9/22/2006 1:02:15 PM

How can we manage the RF600VPN through the WAN We are able to login to the RF600 through the LAN IP, but when we tried it with the WAN IP we are unable to connect to the Web management page.

Product: RF600VPN

Updated: 9/21/2006 9:38:16 AM

Which Route Finder models support IPsec Passthrough

Products: RF820, RF550VPN, RF560VPN, RF600VPN, RF660VPN, RF650VPN, RF760VPN, RF830

Updated: 9/19/2006 4:24:33 PM

Is it possible to enable SNMP monitoring on these routers

Products: RF650VPN, RF600VPN, RF660VPN

Updated: 9/18/2006 4:41:52 PM

Fixed - fetchipac process reaching 100% CPU usage.

Products: RF850, RF860

Updated: 9/18/2006 4:41:47 PM

Fixed - Cron job so it monitors and cleans up /tmp, /var/spool/qmailscan and /var/spool/pop3vscan/children folders.

Products: RF850, RF860

Updated: 9/18/2006 4:41:41 PM

Fixed - Email notification continously sending out email when auto update fails or it is not available.

Products: RF850, RF860

Updated: 9/18/2006 4:41:36 PM

Fixed - SMTP proxy files clean up problem.

Products: RF850, RF860

Updated: 9/18/2006 4:41:31 PM

Fixed - Email Notifications modified for HA Failover.

Products: RF850, RF860

Updated: 9/18/2006 4:42:05 PM

Fixed - A POP3 proxy problem when there are too many To addresses.

Products: RF850, RF860

Updated: 9/18/2006 4:41:25 PM

Fixed - Ipsec VPN using FQDN.

Products: RF850, RF860

Updated: 9/18/2006 4:41:17 PM

Fixed - IPsec VPN Manual mode.

Products: RF850, RF860

Updated: 9/18/2006 4:41:11 PM

Fixed - A VPN UID issue.

Products: RF850, RF860

Updated: 9/18/2006 4:41:04 PM

Fixed - A dual Wan Load Balancing and DNS issue.

Products: RF850, RF860

Updated: 9/18/2006 4:40:54 PM

Added - PPTP support for Windows CE, Apple Mac and Palm OS PPTP clients.

Products: RF850, RF860

Updated: 9/18/2006 4:40:29 PM

Changed - Now shows DNS addresses for PPPoE connections.

Products: RF850, RF860

Updated: 9/18/2006 4:42:40 PM

We have a Windows 2003 DC on our LAN that needs to sync against a Time Server on the Internet through UDP port 123. I have looked at SNAT and DNAT, but I have no idea which of them to use and how to configure it

Product: RF660VPN

Updated: 8/9/2006 5:14:52 PM

How to change MTU settings:

Products: RF600VPN, RF760VPN

Updated: 8/4/2006 3:51:07 PM

I don't know the proper way to set up the Packet Filtering using firmware 3.25. I don't understand the new feature in Packet Filter, the System Defined Rules, should it be checked or unchecked

Product: RF600VPN

Updated: 8/25/2006 10:47:23 AM

Will the RF820 and RF830 ISA have the ability to form static VPN tunnels from one remote store to another remote store thru the Main Store Router VPN tunnel

Products: RF820, RF830, RF850, RF860

Updated: 8/25/2006 11:40:41 AM

We have spam and antivirus setup on our RouteFinder, is there a way to prevent someone from sending an email like jim@xxxxx.com when he does not exist in our exchange users list

Product: RF600VPN

Updated: 8/2/2006 4:53:57 PM

Is there any way of changing the password and user name of the RF600 at the command level

Product: RF600VPN

Updated: 8/15/2006 10:22:55 AM

Does the VPN client software work with the Apple Mac

Products: RFIPSC, RFIPSC2

Updated: 7/19/2006 1:09:06 PM

I have two users who have Windows Mobile devices that are trying to connect to our RF660 VPN connections. Their devices are able to connect to the Internet and download POP3 email just fine, but they cannot connect to the VPN.

Product: RF660VPN

Updated: 7/17/2006 2:59:27 PM

Can I grant or deny user access by their computer MAC

Product: RF660VPN

Updated: 6/9/2006 9:04:31 AM

How can I force the Network interface on the RF600VPN to 10MHz half duplex

Product: RF600VPN

Updated: 6/29/2006 12:58:29 PM

Does this RouterFinder support QoS service

Product: RF600VPN

Updated: 5/9/2006 3:25:49 PM

Can I create multiple IP aliases on this device

Product: RF660VPN

Updated: 5/9/2006 3:25:52 PM

Is there any documentation on managing the RouteFinder via the command line

Product: RF600VPN

Updated: 5/25/2006 9:08:23 AM

Is there anywhere in the RouteFinder where we can see the status of the VPN

Product: RF600VPN

Updated: 4/26/2006 9:38:16 AM

How can I restrict an incoming PPTP connection to only have access to a single machine within our network

Product: RF660VPN

Updated: 4/20/2006 9:31:20 AM

How many users does the RF760VPN support

Product: RF760VPN

Updated: 4/20/2006 9:34:54 AM

How many IP aliases can the RF760VPN support on eth1

Product: RF760VPN

Updated: 4/19/2006 2:26:04 PM

The RF660VPN sends E-Mail to the address defined in the 'E-Mail Address of Spam Account' field. The subject in these E-Mails have the following format: 'SPAM (Score - x.y)', where x.y are numeric. What is the meaning of x.y

Product: RF660VPN

Updated: 4/18/2006 8:59:39 AM

I have been told that if I use URL filtering I must set the client proxy setting to use port 3128. How do I get all traffic to use this port

Product: RF600VPN

Updated: 4/17/2006 4:25:43 PM

This week users have been receiving messages like 'Error the requested URL could not be retrieved' and 'access to the Internet is blocked'.

Product: RF660VPN

Updated: 4/17/2006 4:47:25 PM

A Set up document for customizing the URL filter to allow or block specific sites.

Product: RF660VPN

Updated: 4/17/2006 5:08:43 PM

I am using a transparent (filtering enabled) proxy on this RouteFinder for a grade-school network. My problem is that some websites are blocked that I have set as an allowed category.

Product: RF600VPN

Updated: 4/17/2006 4:56:39 PM

I replaced the RF550VPN with a RF600VPN to handle the excessive amount of spam we receive. We use real-time black lists, our own black lists and attachment filtering to block spam. However, some valid email is blocked.

Product: RF600VPN

Updated: 4/17/2006 12:15:54 PM

Is there a way to shut down the Telnet access to this RouteFinder I can't find an option in the RouteFinder manager software.

Product: RF500S

Updated: 4/14/2006 5:02:13 PM

I saw that the new RF600 we received has a CF card instead of a Hard Drive. Is it possible to use CF card in the old RF600/RF660 and if so whats the minimum size

Product: RF600VPN

Updated: 4/12/2006 4:52:51 PM

Do you have some documentation on setting up the new Multitech IPSEC client Software on a windows PC and the setup side on an RF560 and RF600.

Product: RFIPSC

Updated: 4/12/2006 10:17:10 AM

What is adaptive filtering

Product: RF660VPN

Updated: 4/12/2006 2:26:16 PM

Does this RouteFinder support XAUTH with the possibility to push a configuration to the Client

Product: RF600VPN

Updated: 3/30/2006 10:02:46 AM

I have several RF550s and RF560s that I connect to with my RF560. I'm trying to replace my RF560 with a RF600, but it seems that the RF5x0s permit an IPSec Identifier String containing spaces while the RF600 does not.

Product: RF600VPN

Updated: 3/28/2006 10:00:02 AM

I have multiple clients (using Windows XP PPTP config) trying to access the same VPN concentrator. All of the clients are behind a firewall that is NAT'ing the outbound Internet connection. Is this possible

Product: RF660VPN

Updated: 3/28/2006 9:59:46 AM

Will the RF660VPN support both content filtering and antivirus at the same time without major problems My client uses only POP3 E-mail services on the Internet. I assume that the antivirus will filter this type of traffic

Product: RF660VPN

Updated: 3/22/2006 9:57:41 AM

What DH group does IPSec use

Product: RF760VPN

Updated: 3/22/2006 9:57:56 AM

I'm trying to weed out some of my network intruders and I don't understand what some of your warning messages are, (i.e.'MS-SQL Worm propagation attempt ' or 'SCAN Squid Proxy attempt').

Product: RF600VPN

Updated: 3/22/2006 9:57:49 AM

We are trying to make a VPN connection with a client, but we cannot find out how to make sure the Mode is Aggressive instead of main.

Product: RF600VPN

Updated: 3/2/2006 9:54:47 AM

I'm trying to have remote users authenticate to this device which works but I have problems when trying to have the RasFinder authenticate to a 2003 IAS server. Does the RasFinder work with a 2003 IAS server using Radius

Product: MTASR3-200

Updated: 2/24/2006 1:57:08 PM

Aside from a Pentium 3 800Mhz, can we upgade to a higher speed 370-based processor Up to what speed

Product: RF660VPN

Updated: 2/24/2006 1:57:15 PM

I have trouble with the RF600VPN using new firmware 3.25 resolving DNS. I need the RF600VPN to be the DNS for the local network and feel I configured it correctly but it won't resolve DNS, why it isn't working

Product: RF600VPN

Updated: 2/24/2006 1:57:11 PM

The RF560 routers allow you to specify a WINS Server in the DHCP section. I need to do that for a customer with an RF600 but I can't find where to enter it. Does the RF600 support assigning the WINS server during DHCP the way the RF560 does

Product: RF600VPN

Updated: 2/24/2006 1:57:05 PM

Whart are the names of the files that are altered in the RasFinder software when a config is downloaded

Product: MTASR3-200

Updated: 2/10/2006 12:54:12 PM

We had our RF600 lock up twice this week. After power cycling the unit, one of the RF560s will not reestablish it's IPSec until it's rebooted by webadmin command or power cycling the RF560 unit.

Product: RF600VPN

Updated: 12/28/2006 8:39:38 AM

Fixed - Self Monitor logs reporting the wrong status when PPPoE or DHCP is enabled on the WAN link.

Products: RF850, RF860

Updated: 12/28/2006 8:39:28 AM

Fixed - SMTP spam filter Auto Learning options. Auto learning was not working properly.

Products: RF850, RF860

Updated: 12/28/2006 8:39:25 AM

Fixed - Intrusion detection mail was being sent every minute when DDNS is configured and enabled.

Products: RF850, RF860

Updated: 12/28/2006 8:39:22 AM

Fixed - A Split-Brain problem in High Availability. There are instances when both master and slave are active when High Availability is turned on.

Products: RF850, RF860

Updated: 12/28/2006 8:39:12 AM

Fixed - an iptables rules wipeout problem. After a restart or reboot, you could no longer access anything through the RouteFinder.

Products: RF850, RF860

Updated: 12/28/2006 8:39:08 AM

Changed - Default values for IPSec parameters. Number of retries for IPec connections is set by default to zero and leftnexthop to '0.0.0.0'.

Products: RF850, RF860

Updated: 12/28/2006 8:39:04 AM

Changed - DO NOT send back bounced mail notifications from SMTP proxy when mail can not be delivered.

Products: RF850, RF860

Updated: 12/28/2006 8:39:00 AM

Changed - Now allows assigning private internal DNS addresses in the RouteFinder.

Products: RF850, RF860

Updated: 12/28/2006 8:38:54 AM

Changed - When load balancing is enabled, you can now assign specific traffic or network on a specific WAN link.

Products: RF850, RF860

Updated: 12/22/2006 8:34:53 AM

How many users can I have on each remote network

Product: RF850

Updated: 12/22/2006 8:34:36 AM

How many PPTP VPN Clients can log into the RF860 & RF850

Products: RF850, RF860

Updated: 12/15/2006 8:12:57 AM

Is there any way to have a history of reports automatically maintained on the device

Product: RF850

Updated: 12/15/2006 8:12:19 AM

What is the firewall and VPN throughput for the 800 series routers

Products: RF820, RF830, RF850, RF860

Updated: 12/15/2006 8:11:26 AM

I just POP'd my myrealbox.com account. I received 384 messages (100% spam), but your box only caught 51 messages.

Product: RF850

Updated: 12/15/2006 8:10:19 AM

How do I open specific ports through the firewall

Product: RF850

Updated: 12/15/2006 8:12:43 AM

Which RouteFinders support IPSec bridging

Products: RF600VPN, RF550VPN, RF560VPN, RF660VPN, RF760VPN, RF820, RF830, RF850, RF860

Updated: 12/13/2006 11:15:15 AM

Load Balancing How To Document.

Products: RF850, RF860

Updated: 11/3/2006 5:01:54 PM

How can I verify my current configuration (cpu / diskpace / memory) and what are my upgrade options. Do I have to get these components form you Is it possible to add a second disk drive Will a USB attached drive work

Product: RF660VPN

Updated: 11/3/2006 5:04:23 PM

I would like to rename services, ports, etc. How can I do it

Product: RF660VPN

Updated: 11/3/2006 3:49:56 PM

Is the RF650 capable of using a modem as a backup Internet connection

Products: RF650VPN, RF660VPN

Updated: 11/3/2006 3:14:56 PM

Document explains about the Configuration of the Message filtering for normal and regular expressions.

Product: RF600VPN

Updated: 11/3/2006 5:26:27 PM

I have an RF600VPN, after it is on for a while , many error messages are displayed on the screen. I tried to reload the firmware, but those error messages are still displayed on the screen.

Product: RF600VPN

Updated: 11/22/2006 12:42:30 PM

How can I change the default email sending address

Product: RF660VPN

Updated: 11/22/2006 11:09:29 AM

I want to setup two groups in the RouteFinder, one group allowed to certain sites and another group allowed a different set of sites.

Product: RF600VPN

Updated: 11/22/2006 11:09:13 AM

Does the internal modem in the MTASR3-200 support configuration via AT Command

Product: MTASR3-200

Updated: 11/16/2006 10:48:41 AM

Will the RF850 work with AES-128 implementing more than 10 VPNs with RF560 routers

Product: RF850

Updated: 11/16/2006 10:48:33 AM

What is the format or is there an external application for viewing HTTP reports (URL Filtering) on the RF850 The files are zipped up with filenames like sargfile_06-07-15_23-43.zip.

Product: RF850

Updated: 11/13/2006 3:58:00 PM

What is the maximum amount of Ram allowed in an RF760VPN

Product: RF760VPN

Updated: 10/9/2006 4:26:41 PM

This Document presents the requirements and procedure for setting up High Availability using RouteFinder with software version 3.30 or above.

Products: RF600VPN, RF850, RF860

Updated: 10/6/2006 12:02:39 PM

Is there a way in the RouteFinder to test total bandwidth coming in and out through the firewall

Products: RF760VPN, RF600VPN, RF660VPN, RF550VPN, RF560VPN

Updated: 10/6/2006 3:52:33 PM

When I shutdown the RF600VPN from the Web Management-Version 3.24, the unit never actually shutsdown. It beeps continually, any ideas

Product: RF600VPN

Updated: 10/20/2006 9:25:44 AM

Can I grant or deny user access by their computer MAC

Product: RF660VPN

Updated: 10/19/2006 9:47:20 AM

Example explaining how to use DNAT and Aliasing on the RF600 / RF660 / RF760 to allow a remote workstation to create a Telnet connection to a LAN though the RouteFinder.

Products: RF660VPN, RF600VPN, RF760VPN

Updated: 10/12/2006 8:11:47 AM

Does this RouteFinder support static NAT

Product: RF860

Updated: 9/8/2005 10:24:46 AM

I recently rebooted my RF600VPN firewall and found its Status light flashing continuously. Should I care about this

Product: RF600VPN

Updated: 9/8/2005 10:49:12 AM

What directory contains the files that keep the data for the 'HTTP Access Reports' (web user access reports) in

Product: RF600VPN

Updated: 9/30/2005 8:47:18 AM

Does this RouteFinder support two default gateways

Product: RF760VPN

Updated: 9/30/2005 9:02:54 AM

I came back from vacation and have 14,000 mails in the SPAM filter quarantine. I do not have the next week to delete these 20 at a time. What folder are these located in and what would be the process of getting in at a prompt to clear this out

Product: RF660VPN

Updated: 9/30/2005 8:57:41 AM

How to delete the HTTP access log file from the RF660VPN.

Product: RF660VPN

Updated: 9/30/2005 9:02:39 AM

The Virus Checker has quarantined an SMTP email from one of the internal users sent to one of her clients. What is the name of the virus that has been trapped here

Product: RF600VPN

Updated: 9/30/2005 9:02:34 AM

Can the users be automatically notified that the file they attempted to send contains a virus

Product: RF600VPN

Updated: 9/30/2005 9:02:21 AM

I've noticed our Multi-Tech RF600VPN isn't catching much SPAM. I am using sbl-xbl.spamhaus.org as the RBL server. Is there something different to use

Product: RF600VPN

Updated: 9/30/2005 9:02:00 AM

Changed - Removed the start-up file scan and repair so the Routefinder can boot-up faster. File scan and repair now only performs on abnormal shutdowns.

Products: RF600VPN, RF660VPN, RF760VPN

Updated: 9/30/2005 9:01:55 AM

Fixed - The backup file so the mail server does not detect it as virus email.

Products: RF600VPN, RF660VPN, RF760VPN

Updated: 9/30/2005 9:01:43 AM

Fixed - A URL filtering problem when searching Google / Yahoo / MSN images related to Adult / porn content.

Products: RF600VPN, RF660VPN, RF760VPN

Updated: 9/30/2005 9:01:35 AM

Fixed - A PPTP access problem when the WAN link is using PPPoE.

Products: RF600VPN, RF660VPN, RF760VPN

Updated: 9/30/2005 8:58:53 AM

Added - An option for quarantined email so it can be forwarded directly to an external mail account instead of being stored locally on the internal hard drive.

Products: RF600VPN, RF660VPN, RF760VPN

Updated: 9/30/2005 8:58:09 AM

Added - An option in Factory Default reset that clears all old log files.

Products: RF600VPN, RF660VPN, RF760VPN

Updated: 9/30/2005 8:59:14 AM

Fixed - A buffer overflow vulnerability found in the PPTP-1.0.1 version.

Products: RF600VPN, RF660VPN, RF760VPN

Updated: 9/30/2005 8:58:02 AM

Added - A Syslog timeout program to monitor and detect hard drive lockup error messages.

Products: RF600VPN, RF660VPN, RF760VPN

Updated: 9/30/2005 8:56:46 AM

We just received a replacement RF600 with factory settings. We are going to be replacing another RF600 that is already on-site. Is there a migration path from the old router to the new one

Product: RF600VPN

Updated: 9/30/2005 8:56:10 AM

We are using an RF600VPN as NAT. How can we block port 25 from lan users Do you have an example of a packet filter rule for this

Product: RF600VPN

Updated: 9/30/2005 8:55:57 AM

Is it possible to create another user with admin privileges How do I change the admin password

Product: RF600VPN

Updated: 9/30/2005 8:55:52 AM

Fixed - A custom URL filter now allows access when words in the URL link belong to a particular category.

Product: RF600VPN

Updated: 9/30/2005 8:55:48 AM

Fixed - A DNS proxy from writing too many log entries.

Product: RF600VPN

Updated: 9/30/2005 8:55:41 AM

Fixed - The IPTable rule in the SKIP_REDIRECTION chain for a road warrior scenario in IPSec should have the remote_gateway iIPas the destination address instead of 0.0.0.0/32.

Product: RF600VPN

Updated: 9/30/2005 8:55:37 AM

Fixed - A RouteFinder IPAddress listed in the ORDB Server. To fix this problem, add *@*@ in the bad patterns in the sender/recipient.

Product: RF600VPN

Updated: 9/30/2005 8:55:31 AM

Fixed - An Anti-Virus early expiration notification.

Product: RF600VPN

Updated: 9/30/2005 8:55:24 AM

Fixed - A SPAM Log display problem for the last 30-day logs as well as rotated logs.

Product: RF600VPN

Updated: 9/30/2005 8:55:18 AM

Fixed - A POP3 proxy problem when scanning a huge email for viruses and spam.

Product: RF600VPN

Updated: 9/30/2005 8:55:12 AM

Fixed - An IPSec Live connection display problem; duplicate entries were displayed.

Product: RF600VPN

Updated: 9/30/2005 8:55:06 AM

Fixed - When deleting the bridge end point, the route entry was not deleted. Now it is.

Product: RF600VPN

Updated: 9/30/2005 8:54:56 AM

Fixed - A problem when the access.log file becomes very large.

Product: RF600VPN

Updated: 9/30/2005 8:54:48 AM

Fixed - The creation of pppd.tdb file by the PPTP server.

Product: RF600VPN

Updated: 9/30/2005 8:54:41 AM

Fixed - An IP-aliasing problem.

Product: RF600VPN

Updated: 9/30/2005 8:54:35 AM

Generation of aid detection report for N/W Intrusions.

Product: RF600VPN

Updated: 9/30/2005 8:54:30 AM

Fixed - A URL Categorization and database corruption problem.

Product: RF600VPN

Updated: 9/30/2005 8:54:25 AM

Fixed - A PPTP connection problem.

Product: RF600VPN

Updated: 9/30/2005 8:54:18 AM

Added - More options to manage the SMTP Spam quarantined email and the Virus quarantined email.

Product: RF600VPN

Updated: 9/30/2005 8:54:09 AM

Added - An option for number of retries in the VPN tunnel setting.

Product: RF600VPN

Updated: 9/30/2005 8:53:17 AM

Added - An option to log and drop fragmented packets.

Product: RF600VPN

Updated: 9/30/2005 8:53:11 AM

Added - Logging for Web Admin access.

Product: RF600VPN

Updated: 9/30/2005 8:53:06 AM

Added - Configuration for sending email notification. This allows the administrator to control the type of email notification that is sent out.

Product: RF600VPN

Updated: 9/30/2005 8:52:54 AM

Changed - The URL with an underscore (_) is supported in SQUID and the geturlcategory of the WEBGUI.

Product: RF600VPN

Updated: 9/30/2005 8:52:45 AM

Added - A feature to get the report of all quarantined mail.

Product: RF600VPN

Updated: 9/30/2005 8:52:34 AM

Added - A feature to add the From: and To: addresses from the quarantined mails to the 'Sender black list' and the 'Recipient Black List' in the SMTP-SPAM Filtering.

Product: RF600VPN

Updated: 9/30/2005 8:52:25 AM

Changed - Enabled ICMP Forward by default. This will allow ping to work from LAN to WAN.

Product: RF600VPN

Updated: 9/30/2005 8:52:14 AM

Added - Intrusion Detection email notification to include the HTML format.

Product: RF600VPN

Updated: 9/30/2005 8:52:02 AM

Added - An option for Pop3 virus mail notification to the administrator. Mail cannot be blocked to recipient.

Product: RF600VPN

Updated: 9/30/2005 8:51:55 AM

Changed - Now allows editing of the DNS Server IP in the interface page when PPPOE is enabled.

Product: RF600VPN

Updated: 9/30/2005 8:51:44 AM

Removed - IPSec Predefined CA.

Product: RF600VPN

Updated: 9/30/2005 8:51:34 AM

Changed - Now Prevents redirection of HTTP port 80 to port 3128 in the pre-routing chain for traffic that is a part of the VPN tunnel.

Product: RF600VPN

Updated: 9/30/2005 8:51:28 AM

Added - A disk / file scan and repair during bootup

Product: RF600VPN

Updated: 9/30/2005 8:51:16 AM

Updated - The Linux IPTables from 1.2.6a to 1.2.11

Product: RF600VPN

Updated: 9/30/2005 8:50:54 AM

Update - The Linux Kernel to 2.4.26

Product: RF600VPN

Updated: 9/30/2005 8:50:40 AM

Added - Support for Multiple RBL servers in the SMTP spam filter.

Product: RF600VPN

Updated: 9/30/2005 8:50:30 AM

Enhanced - Spam filtering using an Adaptive Bayesian algorithm.

Product: RF600VPN

Updated: 9/30/2005 8:50:19 AM

Added - Rescue kernel so software can be reinstalled without using CD-ROM drive.

Product: RF600VPN

Updated: 9/30/2005 8:50:01 AM

Added - Block Networks in SMTP Spam Filtering.

Product: RF600VPN

Updated: 9/30/2005 8:49:40 AM

Added - Kernel panic auto-reboot.

Product: RF600VPN

Updated: 9/30/2005 8:49:29 AM

Added - A RRD tool for MRTG graph generation.

Product: RF600VPN

Updated: 9/30/2005 8:49:19 AM

Added - A PoP3 proxy spam filtering.

Product: RF600VPN

Updated: 9/21/2005 1:18:55 PM

The manual does not show the settings for the dip switches located on the board. What do the switches do, does it have anything to do with controlling the modems

Products: MTPSR3-200, MTASR3-200

Updated: 9/2/2005 3:01:47 PM

Can I load an RF600VPN configuration onto an RF660VPN without any problems

Product: RF600VPN

Updated: 8/17/2005 4:05:40 PM

How do I configure the SMTP spam proxy area to send the most legitimate email outbound, but block spam from going outbound

Product: RF660VPN

Updated: 7/19/2005 1:22:24 PM

Will the 'RFIPSC-1 IPSec VPN Client-1 User' software work as a client to the 'RF550VPN' host The host will have a static IP, the client will not.

Products: RFIPSC, RF550VPN

Updated: 7/19/2005 2:26:27 PM

We have a routefinder rf802ew installed, which keeps attempting to install 'RouteFinder Utilities'.

Product: RF802EW

Updated: 7/19/2005 12:45:38 PM

After enabling intrusion detection, I noticed that there are no logs for intrusion and there is a message 'there are no snort logs'.

Product: RF660VPN

Updated: 7/19/2005 12:49:38 PM

I am having problems with some IPsec tunnels not re-establishing themselves between a RF550 and RF660. There is a reference in the RF660 logs about 'no suitable connection for peer at '0.0.0.0'.'

Products: RF660VPN, RF550VPN

Updated: 7/19/2005 1:16:01 PM

Under Intrusion Detection, there is the option 'user defined Network Intrusion Detection rules'. If I add a rule to this list, will this produce an intrusion alert based on the rule, or ignore the sources that are listed as rules

Product: RF660VPN

Updated: 7/19/2005 1:18:58 PM

http://www.danburysales.com/ is being blocked by the SurfControl web filter 'Shopping' and yet this filter isn't turned on. What is happening

Product: RF660VPN

Updated: 7/19/2005 1:37:30 PM

After enabling Intrusion Detection I receive messages saying 'Files were found to be changed by some intruder'. What does this mean and how can we exclude this update from generating these reports

Product: RF660VPN

Updated: 7/19/2005 1:38:14 PM

Packet Filter rule with service as 'ICMP as Network Unreachable and Protocol Unreachable' is not getting added.

Product: RF660VPN

Updated: 7/19/2005 11:26:11 AM

This message has started to pop-up on our RF650VPN: 'swap usage too high: 100340 > 100000 kB Multi-Tech Systems 2.027' What does it mean Is there something we should do

Product: RF650VPN

Updated: 7/19/2005 12:53:56 PM

We get this message from an RF650VPN: 'Obj: SelfMonitoring: No pid for nacctd - restarting(1 times) No pid for nacctd - restarting nacctd' What's the problem

Product: RF650VPN

Updated: 7/19/2005 1:27:30 PM

It seems that the disk space used for logs is full. I keep getting the following message: 'There are too many old logfiles in /var/log.....'. Is there some way to clean up the disk a bit so I don't get the message every half hour or so

Product: RF650VPN

Updated: 7/19/2005 1:54:01 PM

We have set up an RF650VPN and I receive this message once per hour 'Your eMail with the following data could not be delivered within the last 1 hour(s)'. How do I disable this message

Product: RF650VPN

Updated: 7/19/2005 10:18:48 AM

Will the RouteFinder log all visited URLs to file and send the log to a specified e-mail address Can it deny access to some URLs (example: a URL which contains the word 'sex'), a simple URL filtering based on keywords

Product: RF600VPN

Updated: 7/19/2005 10:59:03 AM

I was manually updating a RF600VPN to (3.11). I used the WinSCP to copy the files to /home/loginuser, then I SSH into the box, but when I try to move the files to /var/spool/autoupdate I get a message 'permission denied' the user was 'loginuser'.

Product: RF600VPN

Updated: 7/19/2005 11:04:43 AM

I have a problem with the RF600PVN ver 3.05. The 'IPSec live connections' button does not correctly report our current VPN connections. Most of the time the list is incomplete, as an example, if we have 10 IPSec tunnels up, it shows only 4 or 6.

Product: RF600VPN

Updated: 7/19/2005 11:14:39 AM

I've setup the filter to allow categories (Investement, General News, Usenet News, etc.) but when I try to go to the site 'www.times.com' the RouterFinder blocks that site.

Product: RF600VPN

Updated: 7/19/2005 12:43:10 PM

Is there anyway with your device to block LAN IP from LAN IP 'Rules'

Products: RF550VPN, RF600VPN, RF660VPN

Updated: 7/19/2005 1:25:44 PM

The validation checks if PPPoE user names have been removed. Except for <, >, ', anything can be configured. The length of the user name has been fixed to 50 characters.

Products: RF600VPN, RF660VPN

Updated: 7/19/2005 1:17:22 PM

Does the RouteFinder support more than 16 ports in the 'Virtual Server Settings' Menu

Product: RF500S

Updated: 7/19/2005 2:07:37 PM

I have a game and for me to run a server it tells me to 'use port forwarding for port 5121' so that others may see my server from behind the firewall. How I should do this

Product: RF500S

Updated: 7/19/2005 3:08:16 PM

A telnet session will work for a while, never the same amount of time and then reports 'the connection has been lost'.

Product: RF500S

Updated: 7/19/2005 3:13:52 PM

Why do I receive more and more 'Intrusion-TCP fr', when I bring up the monitor.

Product: RF500S

Updated: 7/19/2005 10:33:47 AM

Fixed a Registry cleanup problem for logged in servers. A menu item 'Delete IP Server Details' was added in the Port Setup screen that pops-up a dialog box which contains a list of servers to be deleted.

Products: MCSI2000, MTASR3-200, CC4H-4S, CC4M-8, CC4S-8

Updated: 7/19/2005 1:08:55 PM

Can the radius attribute 'Acct-Terminate-Cause' reflect either 'User-Request' or 'Lost-Carrier' It currently displays 'User-Request' regardless of the type of disconnection.

Product: MTASR3-200

Updated: 7/19/2005 1:13:53 PM

The default number of PPP Auth Retries is now set to '1' instead of '5' retries.

Product: MTASR3-200

Updated: 7/19/2005 1:14:24 PM

The default RADIUS Retransmissions is now set to '3' instead of '5' retries. The default RADIUS Timeout Period is now set to 3 instead of 1 second.

Product: MTASR3-200

Updated: 7/19/2005 1:29:35 PM

The unit does not support the definition of a default IP domain. So, when dialing in from a character cell terminal and selecting option '2.' Telnet to Host from the 'Shell Menu', the user must fully qualify the input to the Server Address prompt.

Product: MTASR3-200

Updated: 7/19/2005 1:56:39 PM

MLPPP link resets every two hours when all three WAN ports are connected. The error message logged is 'Not Enough Buffers'.

Product: MTASR3-200

Updated: 7/19/2005 1:57:02 PM

User Database error message 'Malloc Fails' is displayed on the terminal when the Database is cleared.

Product: MTASR3-200

Updated: 7/15/2005 4:52:12 PM

I need to detect in the Central Office when a VPN conection is down. Will the RouteFinder notify us if this happens What troubleshooting information does the Reporting function provide

Product: RF760VPN

Updated: 7/15/2005 4:51:56 PM

It seems we can only link two offices through a VPN connection using the RouteFinder series. How do we connect several offices

Product: RF660VPN

Updated: 7/15/2005 4:53:23 PM

Am I able to edit /etc/multiconf/dhcpserver and add an additional entry for the DMZ interface Can I also edit /etc/dhcp.conf to add the subnet I would like to put a wireless access point outside the firewall on the DMZ.

Product: RF600VPN

Updated: 7/15/2005 4:48:31 PM

Can the Web interface show the arp table

Product: RF600VPN

Updated: 7/15/2005 4:48:20 PM

Fixed a disk full problem by checking and removing .tar files in the / directory.

Products: RF600VPN, RF660VPN, RF760VPN

Updated: 7/15/2005 4:48:08 PM

Fixed DNS proxy settings in the Web Admin UI. After adding WAN and DMZ into the Interface to listen to, you cannot remove them.

Products: RF600VPN, RF660VPN, RF760VPN

Updated: 7/15/2005 4:47:58 PM

Fixed a clean out old spam mail problem when the disk reaches 80% full.

Products: RF600VPN, RF660VPN, RF760VPN

Updated: 7/15/2005 4:47:49 PM

Fixed a hanging problem when restarting using Web Admin.

Products: RF600VPN, RF660VPN, RF760VPN

Updated: 7/15/2005 4:47:37 PM

Fixed a cannot enter @* in the bad pattern for sender / recipient within the spam filter setup page.

Products: RF600VPN, RF660VPN, RF760VPN

Updated: 7/15/2005 4:47:16 PM

Fixed a POP3 proxy virus scan hang problem when the email contains more than 255 characters on a single line.

Products: RF600VPN, RF660VPN, RF760VPN

Updated: 7/15/2005 4:47:05 PM

Fixed a problem with the hourly virus pattern update.

Products: RF600VPN, RF660VPN, RF760VPN

Updated: 7/15/2005 4:46:54 PM

Fixed http access and rejects reports. The reports were missing some of the days

Products: RF600VPN, RF660VPN, RF760VPN

Updated: 7/15/2005 4:53:12 PM

I'm trying to re-program my MTASR3-200 with a new IP. Every program I use from your website locks my PC up. What program do I use I have a serial cable with an RJ45 end plugged into its command port. How do I reset the device to factory defaults

Product: MTASR3-200

Updated: 5/10/2005 9:27:10 AM

I have set up an IPsec tunnel to one client and another to a company. I want them to be able to talk to each other through my RF660. I have had the connection up more than once, but after a while errors start to occur, and the tunnel goes down.

Products: RF660VPN, RF600VPN, RF760VPN

Updated: 4/28/2005 4:18:09 PM

If we want to protect the DNS that has a public IP address from external intruders coming through the Wan port, where should the DNS be connected to What should be done with the public IP address of the DNS or other servers connected

Product: RF660VPN

Updated: 3/30/2005 1:23:54 PM

Is this RouteFinder HIPAA compliant

Products: RF550VPN, RF600VPN, RF650VPN, RF660VPN

Updated: 3/18/2005 2:24:08 PM

Is there a rule I can use to prevent IDS events from filling up my log

Product: RF660VPN

Updated: 3/18/2005 2:23:50 PM

Fixed a manual addition of an IP Server problem. The product types (SEIP and AG) were not properly updated into COMMAP.

Products: MCSI2000, CC4H-4S, MTASR3-200, CC4M-8, CC4S-8

Updated: 3/18/2005 2:23:54 PM

Fixed a logging into all the discovered servers problem. If a default login or a server login is configured, it tries to login to the server. After logging in, it updates COMMAP.

Products: MCSI2000, MTASR3-200, CC4H-4S, CC4M-8, CC4S-8

Updated: 3/18/2005 2:24:01 PM

Changed the password string display. The password field is now hidden in the Add Port, Login Server and Default Login dialog boxes.

Products: MCSI2000, MTASR3-200, CC4H-4S, CC4M-8, CC4S-8

Updated: 2/16/2005 9:28:44 AM

Is there any way to remove the SMTP spammed quarantined email using the command line We got tens of thousands of such email. Deleting them page by page from the GUI can take forever!

Product: RF660VPN

Updated: 2/16/2005 10:28:50 AM

By looking at the Intrusion logs of my RF600VPN, can I determine what PORT is being scanned by the SNORT report provided by the RF600VPN

Product: RF600VPN

Updated: 12/9/2005 10:04:38 AM

I am having trouble finding the DHCP client table. I need to know which clients have actually been assigned DHCP IP addresses. I would also like to use the 'current' client table to select Fixed addresses.

Product: RF600VPN

Updated: 12/9/2005 10:04:29 AM

Is there a way to send the mail logs on the RF600VPN to an email server on the local network

Product: RF600VPN

Updated: 12/7/2005 2:29:51 PM

I have an RF600VPN and RF660VPN with 3.10 firmware. With all the remote sites connected to the RouteFinders, I can see more than one connection displayed on the table. I access the table via Statistics & Logs ---> IPSec ---> IPSec live connections.

Product: RF600VPN

Updated: 12/13/2005 5:10:58 PM

Fixed - A URL database corruption problem after a live update.

Products: RF600VPN, RF660VPN, RF760VPN

Updated: 12/13/2005 5:08:31 PM

Fixed - A memory resident program to detect hard drive read / write errors.

Products: RF600VPN, RF660VPN, RF760VPN

Updated: 12/13/2005 5:07:37 PM

Fixed - NETBIOS broadcast rules for VPN were getting deleted from IPTables. Disabling VPN now flushes the NETBIOS rules from IPTables.

Products: RF600VPN, RF660VPN, RF760VPN

Updated: 12/13/2005 5:09:55 PM

Added - A configurable option in the Packet Filter that will prevent the VPN tunnel from dropping packets.

Products: RF600VPN, RF660VPN, RF760VPN

Updated: 12/13/2005 5:09:20 PM

Changed - Now allows the URL custom filter to use a regular expression.

Products: RF600VPN, RF660VPN, RF760VPN

Updated: 11/4/2005 7:59:36 AM

I have installed the RFIPSC SSH IPSec Client Vs 1.3. I Set up a VPN Connection from home to connect to my network at work. When I run the Diagnostics the exchanging IKE proposals Failed. The PreShared Key is set the same. Why has this failed

Product: RFIPSC

Updated: 11/4/2005 7:59:34 AM

Is there a way to place a server with a public IP address behind an RF660VPN and have traffic flow through specified ports

Product: RF660VPN

Updated: 11/4/2005 7:59:22 AM

Our email server ( mail.xxxxxxx.com ) is connected to the DMZ port of an RF660 and SMTP proxy is enabled in the firewall. We are being blacklisted by CBL (cbl.abuseat.org) again and again, how can we solve this problem.

Product: RF660VPN

Updated: 11/4/2005 7:59:31 AM

Are we able to restrict web access to particular time periods during the day and to have this option set for particular groups of users only

Product: RF600VPN

Updated: 11/30/2005 2:54:05 PM

I'm trying to make a VPN connection with an RF660 and a Cisco router, every thing is fine with IKE mode of VPN configuration. The problem I'm facing is configuring the RF660 with any Remote LAN. Does the RF660 supports (Remote LAN any)

Product: RF660VPN

Updated: 11/30/2005 11:33:58 AM

How do I turn on / enable the 'Statistics & Logs HTTP access reports' . No reports are being generated.

Product: RF660VPN

Updated: 11/17/2005 8:20:41 AM

Is there any way I can run a PPTP access report for a particular PPTP user

Product: RF660VPN

Updated: 11/17/2005 8:20:27 AM

Does the Kapersky AV on the RF660VPN install anything on the MS Desktops sitting behind the RF660VPN like the SonicWall AV does

Product: RF660VPN

Updated: 11/17/2005 8:20:43 AM

How do I create a DMZ zone with 2 servers using public IPs on each server

Product: RF600VPN

Updated: 11/17/2005 8:20:38 AM

Does the Anti-virus feature check web pages

Product: RF600VPN

Updated: 11/17/2005 8:20:33 AM

I’m getting two email messages on a Ddns account. The first one says everything is good and then the next one is an error, but the DDNS is working on dyndns.org and on the router, Why

Product: RF600VPN

Updated: 11/17/2005 8:20:24 AM

I'm setting up a RF600VPN to accept PPTP connections and use a radius server, but after setting the authentication type to radius for the PPTP option, no options are displayed to enter the IP, FQDN or the password for the radius server.

Product: RF600VPN

Updated: 11/17/2005 8:20:30 AM

When I setup RADIUS authentication, it has a box for Accounting, but there is no way to put a server IP in just for accounting. Our Authentication Server and Accounting Server are 2 different IP's. Is there a workaround to this

Product: MTASR3-200

Updated: 11/16/2005 2:29:48 PM

The E-mail Anti-Virus Protection isn't working.

Product: RF650VPN

Updated: 10/4/2005 6:08:00 PM

Where are the http proxy error files located Where are the files that have blocked sites and refused connections

Product: RF660VPN

Updated: 10/4/2005 10:24:17 AM

We have a MultiVOIP behind an RF660VPN(3.05) and have set port 1720, 5000-5075 and 16000-20000 from WAN to the MVP’s internal IP. When we make a call from outside to the VOIP, a ring tone is heard, but if picked up, no voice is heard.

Products: RF660VPN, RF560VPN

Updated: 10/4/2005 6:08:05 PM

I reserved an address for a printer based on the MAC address. The RF600 will give that reserved address to the printer, but if I turn the printer off for a while, the RF600 will hand out that reserved address to a new PC on the network.

Product: RF600VPN

Updated: 10/3/2005 12:56:53 PM

Do you have any plans to include BGP support in the RF600VPN

Product: RF600VPN

Updated: 10/3/2005 12:56:43 PM

I need a method to track outbound SMTP. I somehow got a virus on the inside that sent a bunch of spam out. What's the best way to check and see what's going out, or identify the machine on the inside that sent the email

Product: RF600VPN

Updated: 10/3/2005 12:56:35 PM

Does the RF600 have a maximum size limit on email, I keep getting my outbound mail bounced when I attach a large graphic file Can I change this setting

Product: RF600VPN

Updated: 10/28/2005 10:31:40 AM

I have a client with a wireless ISP who wants the WAN port set to 'full duplex', what is the port currently set at and is there a way to change it to full duplex

Product: RF660VPN

Updated: 10/28/2005 10:31:43 AM

Many phone company ISPs use PPPoA for authentication, will the RouteFinder support PPPoA type connections from phone company ISPs

Product: RF600VPN

Updated: 10/21/2005 2:26:43 PM

Is there an option for email notification if a tunnel drops

Products: RF600VPN, RF660VPN

Updated: 10/21/2005 2:58:23 PM

How to backup and restore the configuraton.

Products: RF660VPN, RF600VPN

Updated: 10/20/2005 1:11:41 PM

Example: How to fill out DNAT / packet filter rules.

Product: RF600VPN

Updated: 10/13/2005 4:14:32 PM

The pop spam filter seems new(or just different) in v3.24, is the spam filter configurable to completely block rather than tag

Product: RF600VPN

Updated: 1/19/2005 11:24:02 AM

I am trying to create an IPSec tunnel between an RF560VPN and RedHat Linux. Can you tell me if this works and what I need to do for this

Products: RF560VPN, RF660VPN

Updated: 1/19/2005 11:23:42 AM

With a 256K or above connection between an RF660VPN and an RF560VPN, will I get better throughput with VPN compression turned on or off

Products: RF660VPN, RF560VPN

Updated: 1/19/2005 11:15:56 AM

When the RouteFinder sees a new IP from the ISP (pppoe), does the dynamic IP client do an update immediately after It seems like there is a good size delay. Does this cause a delay in the IPSec connection

Product: RF660VPN

Updated: 1/19/2005 11:14:04 AM

I've just migrated from an RF550 to an RF6x0 v3.10. I'm using a PPPoe connection, and I want to use DDNS for my WAN IP address (like I used to do with the RF560). How do I set this up

Product: RF660VPN

Updated: 1/19/2005 11:13:18 AM

Can message filtering allow for forwarding to an administrator's address or translating an email address to a forwarding address

Product: RF660VPN

Updated: 1/19/2005 11:12:50 AM

We are using the RF550 in our branches and an RF660 as a central point where we monitor our network. However, the problem is, as an ISP, we cannot monitor inside the VPN between the nodes.

Products: RF660VPN, RF550VPN

Updated: 1/19/2005 11:11:49 AM

We are trying to integrate a VPN with an RF660 with several clients who have Sonicwall VPN appliances. The Sonicwall models are TZ170 and Tele3. What setting do we need to do on both the RF660 and the Sonicwall in order to enable the IPSEC tunnel

Product: RF660VPN

Updated: 1/19/2005 11:11:18 AM

How do I allow ICMP echo reply for a host on a LAN that is reached from outside using a DNAT

Product: RF660VPN

Updated: 1/19/2005 11:04:45 AM

Now allows entering a domain name ending with .info in the Wizard Setup.

Product: RF660VPN

Updated: 1/19/2005 11:21:57 AM

If I were to use SSH to login to an RF600 and wanted to get a backup file, where would backup files be located What are the commands to create a new backup of the unit in the command console

Product: RF600VPN

Updated: 1/19/2005 11:20:47 AM

I am trying to track SMTP port usage on my LAN going out of the RouteFinder. I put in a rule to log any traffic from the LAN on the SMTP port. Where do I go to view the log of this traffic

Product: RF600VPN

Updated: 1/19/2005 11:22:55 AM

RF600VPN and RF660VPN Hard Disk Drive Recovery Guide.

Products: RF600VPN, RF660VPN

Updated: 1/19/2005 11:26:05 AM

We have an RF600VPN and since last week, the router would not allow me to login through Web Administration. But, I did not change the password. Is there a way such as pushing a button on the panel to reset the router to default status

Products: RF600VPN, RF660VPN

Updated: 1/19/2005 11:16:49 AM

Why do I get these messages almost constantly <<routefinder.cohuttaxxxxx.com- Self Monitor>> (over 100 yesterday alone) The RF600VPN is up and running fine from what we can tell. If I reboot, they'll stop for maybe a half a day; then start up again.

Product: RF600VPN

Updated: 1/19/2005 11:15:16 AM

Why does the RF600 not support IPSec passthrough

Product: RF600VPN

Updated: 1/19/2005 11:10:39 AM

Does the RF600VPN support IPSec Passthrough (local and remote Ipsec identifier) like the RF550 does

Product: RF600VPN

Updated: 1/19/2005 11:10:01 AM

Which Multi-tech RouteFinders support Windows PPTP

Products: RF600VPN, RF560VPN, RF660VPN, RF760VPN

Updated: 1/19/2005 10:26:54 AM

Can I disable NAT on the RF6xxVPN and use the device as a router

Products: RF660VPN, RF600VPN

Updated: 1/18/2005 10:40:35 AM

In the past two weeks I have noticed that Internet access slows to a crawl. We have several VPN connections on the unit that continue without a slowdown. Also, connecting to the RF660VPN via the Web interface works at regular speed.

Product: RF660VPN

Updated: 1/18/2005 10:23:18 AM

On the pptp Live Connections log screen, I see many connections that are no longer valid, especially since the box has been rebooted. How can I clear these out

Product: RF660VPN

Updated: 1/18/2005 10:32:32 AM

Does the Multitech RF600 support these features / functions

Product: RF600VPN

Updated: 1/18/2005 10:37:21 AM

We use two RASFinders for sharing modem connections, occasionally when the telephone line fails, the MSCI2000 does not detect this and blocks the Comm port. To unblock the port I must reboot the computer.

Product: MTASR3-200

Updated: 1/17/2005 4:41:40 PM

I have upgraded my RF660 from 3.05 to 3.10, and it's working fine. I'm trying to use IPSec Bridging, but it won’t work. I'm using an RF550 in one branch with firmware version 4.65 and in another branch an RF660 with firmware version 3.05.

Product: RF660VPN

Updated: 7/6/2004 9:12:01 AM

Does IDS affect security

Product: RF660VPN

Updated: 6/8/2004 4:00:44 PM

Using an RF660VPN and an RF560VPN we've created an IPSec tunnel between two LANs. The application through the VPN is time sensitive, can I set the priority or a minimum bandwidth for the VPN tunnel so users accessing the Internet don't clog the link

Product: RF660VPN

Updated: 6/8/2004 4:00:41 PM

The URL Content Filtering expired today and the users are not able to access the Internet. How can I put the RouteFinder to work again

Product: RF660VPN

Updated: 6/4/2004 2:55:56 PM

Does the RF650VPN use FreeS/WAN for IPSEC and IKE and if so what version

Product: RF650VPN

Updated: 6/4/2004 2:55:43 PM

I'm having a problem with one of my newly updated RF600VPN's with Network Intrusion Detection. I'm not getting the logs generated. What am I overlooking for generation of the SNORT logs

Product: RF600VPN

Updated: 6/4/2004 2:56:08 PM

How long is the warranty for the Multitech RouteFinder VPN family

Products: RF550VPN, RF102S, RF300E, RF500S, RF560VPN, RF600VPN, RF650VPN, RF660VPN, RF760VPN

Updated: 6/28/2004 1:28:00 PM

We have 100 users and we need 25 of those users to have Internet access and restrict Internet access for the remaining 75 users. Do you have a solution for this

Product: RF600VPN

Updated: 6/28/2004 1:27:53 PM

I have configured the spam assassin and I would like to use the software to blacklist by a partial domain name such as .ru (Russia). Is there a way to easily do this

Product: RF600VPN

Updated: 6/28/2004 1:27:57 PM

I have an MTASR3-200 and I have an issue when users call in. I use RADIUS Authentication for the dial-up users. If my user gets the password incorrect the RASFinder hits the RADIUS engine three times with the incorrect password.

Product: MTASR3-200

Updated: 6/22/2004 10:32:08 AM

I found an email in spam quarantine in the spam log file. The 8.4 score does not tell me why it was quarantined. How can I get more detail about why it was quarantined

Product: RF660VPN

Updated: 6/22/2004 1:30:27 PM

The verification (authentication) of password and usernames takes too long, how do I reduce it

Product: MTASR3-200

Updated: 6/2/2004 3:43:23 PM

Can we use the RF660VPN to receive and route ISDN calls inbound on the COM1 external port of the box

Product: RF660VPN

Updated: 6/2/2004 3:50:55 PM

Fixed a problem adding and deleting URL categories.

Products: RF600VPN, RF660VPN, RF760VPN

Updated: 6/17/2004 3:14:21 PM

Our RF600 (ver 3.11) has been working fine, but today it stopped responding, there was no traffic going through it, there was no response to a ping from the lan or Wan side, there was no way to enter the RF600.

Product: RF600VPN

Updated: 6/11/2004 10:12:50 AM

Disk Clean would not clear out all the quaranteed email when the number of emails was quite large.

Product: RF660VPN

Updated: 5/18/2004 11:45:15 AM

Proxy > SMTP Proxy > SPAM Filtering > Expressions (Enclose Regular Expressions (<...>), confirm if this is the format for a regular expression and not the other way around

Product: RF660VPN

Updated: 5/18/2004 11:42:28 AM

Bad Patterns In Sender/Recipient Address: Should both of these work to block any email with a from address: xxx@postmasterdirect.com *@postmasterdirect.com *postmasterdirect* Also, is it case dependant

Product: RF660VPN

Updated: 5/18/2004 11:21:49 AM

Under version 3.10 of the firmware there is now an option for local and remote UID, what are the rules for using UIDs

Product: RF660VPN

Updated: 5/17/2004 3:30:56 PM

I have misplaced my URL Categorization License Keys for my two RF660VPNs. What can I do to get these numbers

Product: RF660VPN

Updated: 5/17/2004 3:30:43 PM

I am not able to set up ssh access for a natted server behind our RF650. We have ssh access via our VPN tunnel, both the private and the public addresses of the server, but not from the outside. What other setting might be blocking access

Product: RF650VPN

Updated: 5/17/2004 3:30:40 PM

In the activation of the anti-virus license, there is two check boxes in the Proxy SMTP Proxy area. Pop3 Virus protection & SMTP Virus Protection. Are both of these items to be checked

Product: RF600VPN

Updated: 5/14/2004 9:45:00 AM

Which RouteFinder model do I need to use, in order to have a capacity of 1000 TCP / UDP connections

Products: RF600VPN, RF660VPN, RF760VPN

Updated: 4/9/2004 10:20:08 AM

We have an RF660VPN installed with the anti-virus option and are having connect problems when trying to download the E-Mail. We get time-outs when connected and downloading (POP3 traffic) the E-Mail.

Product: RF660VPN

Updated: 4/8/2004 1:36:24 PM

How to Upgrade an RF650VPN to an RF660VPN.

Products: RF660VPN, RF650VPN

Updated: 4/6/2004 12:50:00 PM

Do you support silent mode or unattended mode to install the driver

Product: MTASR3-200

Updated: 4/30/2004 9:06:20 AM

Someone is attempting to hack into our network. We are using a RouteFinder firewall. In the log, we see many spoof (intrusion IP messages). Is there a way to trace the IP address this is originating from

Product: RF660VPN

Updated: 4/29/2004 3:54:14 PM

We have a problem with the RASFinder. When it starts up, the fail led is always lit and we are not able to configure the RASFinder.

Product: MTASR3-200

Updated: 4/23/2004 4:47:44 PM

Proxy > SMTP Proxy > SPAM Filtering > Expressions (Enclose Regular Expressions with < >), Does this apply to the whole message including headers or only to the body of the message

Product: RF660VPN

Updated: 4/23/2004 4:25:00 PM

I need clarification about Proxy > SMTP Proxy > SPAM Filtering specification regarding upper / lower case dependancies. Which entries are case dependant and which aren't

Product: RF660VPN

Updated: 4/22/2004 2:23:10 PM

Under the VPN setup there is a box for a FQDN. Can you use the name from a dynamic DNS service in this box

Product: RF660VPN

Updated: 4/19/2004 12:55:47 PM

How can I upgrade my RF650VPN to an RF660VPN

Products: RF650VPN, RF660VPN

Updated: 4/1/2004 2:17:26 PM

Can the RF650VPN act as a bridge between the WAN and LAN

Products: RF650VPN, RF660VPN

Updated: 3/9/2004 5:05:16 PM

I receive an error when I forward spam mail to more than one email address from the Statistics & Logs SMTP Spam Quarantine page.

Product: RF660VPN

Updated: 3/9/2004 1:43:34 PM

I have a Multitech RF660VPN which I have set-up to allow PPTP access. I would like to authenticate against a Steel Belted Radius for Netware server which does the authentication for my other remote access servers.

Product: RF660VPN

Updated: 3/9/2004 1:33:29 PM

What is the best MTU setting for max throughput and efficient use transporting packets Can I reduce overhead when using 3DES and/or AES

Product: RF660VPN

Updated: 3/9/2004 3:01:12 PM

Does the RF6xx RouteFinder support the Diffie-Hellman Oakley Group 2 key agreement protocol

Products: RF600VPN, RF660VPN

Updated: 3/9/2004 3:01:05 PM

Does the RF6xx RouteFinder support the Pre-shared key Authentication method

Products: RF600VPN, RF660VPN

Updated: 3/9/2004 3:01:26 PM

After a failed connection a problem occurs where the RASFinder locks up and the modem becomes inaccessible. The RASFinder CD light remains on. We can only recover from this by powering down or using a Telnet connection to reset the RASFinder.

Product: MTASR3-200

Updated: 3/8/2004 3:27:41 PM

Do we absolutely need to have an internal exchange server to use spam filtering

Product: RF660VPN

Updated: 3/8/2004 4:18:46 PM

We noticed that the RF660 uses almost all of its memory, can we swap out the 128 meg PC133 DIMM that's in there with a 256 meg one How can we verify correct installation of the new DIMM

Product: RF660VPN

Updated: 3/8/2004 12:58:13 PM

I cannot find the WAN & LAN MAC address info required by our DSL ISP.

Product: RF600VPN

Updated: 3/4/2004 1:14:22 PM

I have a broadband LAN at home but I still keep my dial-up ISP for instances where only a phone line is available. I'm interested in eliminating my dial-up ISP and would like to dial into my LAN. Can I use your MTASR3-200 for this

Product: MTASR3-200

Updated: 3/3/2004 11:17:48 AM

How do I configure automatic updates of virus protection

Product: RF600VPN

Updated: 3/3/2004 11:06:51 AM

Does the SMTP Proxy have to be active to allow the virus scan to function

Product: RF600VPN

Updated: 3/3/2004 12:23:11 PM

I would like to upgrade a RASFinder MTASR3-200 to 32 MB of memory.

Product: MTASR3-200

Updated: 3/29/2004 3:59:09 PM

How many different remote connections (sites) can I have with the RouteFinder

Products: RF650VPN, RF550VPN, RF600VPN, RF660VPN

Updated: 3/26/2004 4:58:16 PM

I'm setting up a RasFinder for use with Windows 2000. I have internal users with dial-back numbers set in the unit. Windows 2000 Pro signs the user on if no dial-back is required, but a dialback user gets a failed sign on.

Product: MTASR1-200

Updated: 3/24/2004 1:18:05 PM

In Statistics & Logs > SMTP Proxy, it says we have 189 messages in the queue with 0 messages in the queue but not processed. Is there a way I can view the messages in the queue before I clean it

Product: RF660VPN

Updated: 3/24/2004 9:22:31 AM

Added a history of calls for PPTP.

Product: RF660VPN

Updated: 3/24/2004 8:52:05 AM

We have an RF650VPN and I would like to put an ftp server on the Internet. How do I configure the firewall to expose the ftp server on the Internet

Product: RF650VPN

Updated: 3/24/2004 10:59:42 AM

How can we reduce the wait time for using dial backup instead of the WAN ethernet port, (currently it is about 3 minutes) How can we program an inactivity timeout

Product: RF600VPN

Updated: 3/24/2004 10:11:54 AM

Is it possible to have 2 Internet access providers and configure the VPN RouterFinder RF600 to automatically balance the Internet traffic from these 2 providers

Product: RF600VPN

Updated: 3/23/2004 11:26:04 AM

We have a mail server (with a web interface on port 80) set up behind the firewall. We cannot access it using standard URLs, we have to use IP addresses.

Product: RF650VPN

Updated: 3/19/2004 1:35:14 PM

Is it possible to disable email notifications through SSH, and which command should I use

Product: RF660VPN

Updated: 3/19/2004 1:31:40 PM

A D-Link VPN router can not connect to the RouteFinder.

Product: RF660VPN

Updated: 3/19/2004 1:28:18 PM

Can we control traffic seperately for Internet and VPN using the RF550VPN

Products: RF550VPN, RF660VPN

Updated: 3/19/2004 1:14:16 PM

How many concurrent sessions are supported by the firewall of the RF560VPN / RF660VPN

Products: RF560VPN, RF660VPN

Updated: 3/19/2004 12:32:51 PM

When configuring PPTP in Network Definitions, how do you create a specific range, like 10.1.1.5 - 10.1.1.10

Product: RF600VPN

Updated: 3/19/2004 1:23:01 PM

Is this RouteFinder capable of supporting access control lists We have a need in some instances to allow access to the main location based on an IP address and not establish a VPN between these locations. Is this possible

Product: RF600VPN

Updated: 3/19/2004 1:33:50 PM

What is the RASFinder's webadmin login username

Product: MTASR3-200

Updated: 3/19/2004 1:06:39 PM

Can I have both PAP and CHAP turned on (enabled)

Product: MTASR3-200

Updated: 3/19/2004 1:05:21 PM

Is the RasFinder's CHAP compatible with Microsoft CHAP

Product: MTASR3-200

Updated: 3/17/2004 11:16:19 AM

Fixed a pop3 email hanging problem when POP3 proxy is enabled.

Product: RF660VPN

Updated: 3/16/2004 5:11:01 PM

Added a Log display for DHCP server.

Product: RF660VPN

Updated: 3/16/2004 4:14:31 PM

Added support for PPTP pass-thru.

Product: RF660VPN

Updated: 3/16/2004 4:14:21 PM

Remote sites can now communicate with each other through a VPN via the central site.

Product: RF660VPN

Updated: 3/16/2004 3:55:11 PM

Add the ability to Route all traffic through the VPN tunnel (including Internet traffic).

Product: RF660VPN

Updated: 3/16/2004 3:07:39 PM

Added support for Netbios broadcast over IPsec.

Product: RF660VPN

Updated: 3/16/2004 3:02:41 PM

Added support for IPsec using FQDN (supports both sides using dynamic IPs).

Product: RF660VPN

Updated: 3/16/2004 2:54:45 PM

Added support for IPsec using UID (supports VPN behind a NAT device).

Product: RF660VPN

Updated: 3/16/2004 2:34:02 PM

Added support for Ipsec DES encryption and Ipsec AES encryption.

Product: RF660VPN

Updated: 3/16/2004 2:16:27 PM

Added support for the X.509 ITU-T and ISO certificate format standard.

Product: RF660VPN

Updated: 3/11/2004 9:55:00 AM

Is it possible to specify more than one RBL site You need more than one to check (RBL's, DUL's, etc).

Product: RF660VPN

Updated: 3/11/2004 9:41:07 AM

What is the disk capacity of the RF600 and RF660 What is the version of Linux used

Products: RF600VPN, RF660VPN

Updated: 3/11/2004 9:35:55 AM

Can I Transfer or copy the Remote User Database created in one MTASR3-200 to another MTASR3-200

Product: MTASR3-200

Updated: 3/10/2004 3:41:16 PM

Does the RF802EW support VPN If not, what wireless router do you recommend that supports VPN.

Product: RF802EW

Updated: 3/10/2004 10:25:36 AM

Can I add to the black list using a subnet classification or network range of IP addresses

Product: RF660VPN

Updated: 3/10/2004 10:25:32 AM

What are the limits in the number / size of quarantined email. What happens when they consume to much disk space. Will the software handle an out of disk space condition

Product: RF660VPN

Updated: 3/10/2004 1:48:29 PM

If I double firewall my customers that have VPNs on them, ie: RF600>RF600 and change that to RF600>RF550>RF550>RF600 what types of problems might I see With double firewall protection and the RF550 in place, will it make it harder to hack into

Products: RF600VPN, RF550VPN

Updated: 3/10/2004 12:45:39 PM

I setup an RF600VPN that requires a remote user to SSH to the unit on port 20022 which is then redirected to port 22 on the Unix host the remote user is connecting to. The SSH user complains that authenticating to the unix server takes too long.

Product: RF600VPN

Updated: 2/8/2004 10:41:07 PM

What is the baudrate of the COM port for the RF6XX Is is set to auto Can you change the settings

Product: RF660VPN

Updated: 2/8/2004 10:41:11 PM

What is the speed / duplex mode at which the RASFinder communicates via the ethernet port Is it 100mpbs/full duplex or half duplex or is 10/half

Product: MTASR3-200

Updated: 2/5/2004 9:45:46 AM

I have a RasFinder that does not boot completely and I can´t access it, the RAS doesn't give the login prompt.

Product: MTASR3-200

Updated: 2/5/2004 9:42:52 AM

We have forgotten the administration password, can we reset the password

Product: MTASR3-200

Updated: 2/4/2004 6:53:07 PM

I have an application involving RF550's and an RF660 for doing VOIP. I have a list of TCP and UDP ports to forward if trying to VoIP to the outside world. I can get the RF550VPN to work but not the RF660VPN.

Product: RF660VPN

Updated: 2/20/2004 9:07:15 AM

How to configure a LAN-to-LAN VPN connection between an RF660VPN at Site A using a static IP address and an RF550VPN at Site B using dynamic IP addressing.

Products: RF660VPN, RF550VPN

Updated: 2/20/2004 9:03:07 AM

Can I have multiple VPN connections from one branch office (1 originating IP address) into my Routefinder RF650

Product: RF650VPN

Updated: 2/20/2004 9:04:52 AM

How can I make a LAN to LAN VPN connection 1 way. That is, I want the users at site A to be able to create a connection to site B, but I do not want the users at site B to initiate any connections to site A. Is this possible

Products: RF550VPN, RF600VPN

Updated: 2/2/2004 3:28:46 PM

How many security policies can be defined in the RF560VPN / RF660VPN

Products: RF560VPN, RF660VPN

Updated: 2/16/2004 12:53:43 PM

I am currently running a VPN using an RF660 and an RF560. I want to put a wireless connection on the 560 side. What kind of hardware do I need, do I just need to get an access point

Product: RF660VPN

Updated: 2/16/2004 12:53:38 PM

How often does the HTTP access reports update Is there a way you can manually update the statistics for the reports

Product: RF660VPN

Updated: 2/16/2004 12:52:53 PM

Where can I check to see the virus detection log

Product: RF660VPN

Updated: 2/16/2004 12:53:34 PM

I receive an error running live update.

Product: RF650VPN

Updated: 2/11/2004 11:04:36 AM

Is there a facility in the RF660VPN to allow dial-up from outside into our network We have a RAS (remote access) server ready on Win NT, but just trying to figure out how the firewall will authenticate an incoming connection of a phone line

Product: RF660VPN

Updated: 2/11/2004 9:33:57 AM

I am setting up a VPN network across a WAN using 1 RF600 and 3 remote RF550s. Are the users at the remote branch able to receive a DHCP address from a server that sits behind the RF600 at the head office How do I set this up

Product: RF600VPN

Updated: 12/6/2004 11:36:41 AM

Does the RF760 support the following functions

Product: RF760VPN

Updated: 12/28/2004 1:00:56 PM

Can I set up a RF650VPN so it accepts incoming VPN connections from both multiple RF550 & IPSec clients both on dynamic IP

Product: RF650VPN

Updated: 12/28/2004 12:58:01 PM

What is the Reset Device option under System Tools doing

Product: RF500S

Updated: 12/21/2004 10:14:19 AM

Is there a way to set filters specifically for email subject fields and header contents

Product: RF660VPN

Updated: 12/21/2004 10:28:10 AM

Fixed some Web page access problems when HTTP proxy is enabled.

Product: RF660VPN

Updated: 12/21/2004 10:21:55 AM

Fixed PPPoE so it does not reconnect every night during log rotation.

Product: RF660VPN

Updated: 12/21/2004 10:30:01 AM

Added a Web UI option to clean the HTTP proxy cache and to clean the SMTP proxy queue.

Product: RF660VPN

Updated: 12/21/2004 10:29:43 AM

Intrusion detection can now be enabled on each interface (LAN, WAN, DMZ).

Product: RF660VPN

Updated: 12/21/2004 10:29:27 AM

Added the ability to customize a port other than port 22 for SSH access.

Product: RF660VPN

Updated: 12/21/2004 10:19:49 AM

Added Accounting that is based on individual IP addresses. Added Accounting that is based on a VPN tunnel.

Product: RF660VPN

Updated: 12/21/2004 10:29:07 AM

Changed to linux kernel 2.4.20.

Product: RF660VPN

Updated: 12/21/2004 10:28:55 AM

Added the display of Quarantined virus and spam email.

Product: RF660VPN

Updated: 12/21/2004 10:28:33 AM

Added Ethernet Mac address filtering.

Product: RF660VPN

Updated: 12/21/2004 10:12:33 AM

More configuration options for the URL content filter:

Product: RF660VPN

Updated: 12/21/2004 10:26:52 AM

Added Email spam filtering based on the following:

Product: RF660VPN

Updated: 12/21/2004 10:26:03 AM

Added support for a Dynamic DNS client.

Product: RF660VPN

Updated: 12/14/2004 2:34:27 PM

Can we connect VPN between a Cisco router and an RF600VPN, Lan to Lan and Client to Lan Does the SSH Sentiel IPSec client software support Cisco's router

Product: RFIPSC

Updated: 12/14/2004 2:44:27 PM

Does the antivirus option on the RouteFinder detect viruses coming or going out via a VPN tunnel

Product: RF660VPN

Updated: 12/14/2004 2:44:53 PM

I have an RF660 with ver 3.11, is it possible to use DNAT to publish a Web server that is located on a subnet different that my LAN This server is on another internal LAN. I have DNAT working without problems on my local LAN.

Product: RF660VPN

Updated: 12/13/2004 10:53:30 AM

I want to setup several VPN connections to remote offices and I must be able to tunnel IPX so I can access older Novel servers. Can IPX be tunneled through PPTP or IPSec

Product: RF600VPN

Updated: 12/1/2004 11:06:09 AM

I plan to set up VPN connections through dial-up as a backup. This is meant to be between an RF660 and an RF550. Only the RF550 will be incorporated with a backup link. I don't want to increase the number of IPSec connections. How can I do this

Product: RF660VPN

Updated: 12/1/2004 11:04:55 AM

I plan to upgrade the management software version 3.0 installed on my RF660VPN, but I only want to upgrade it to 3.5. Is there an easy way to do this

Product: RF660VPN

Updated: 12/1/2004 11:03:55 AM

I just updated the version to 3.10, do you have any information about configuring the spam filtering feature. What URL should I put on the RBL ( Real Time Black List SERVER) Server URL

Product: RF660VPN

Updated: 12/1/2004 11:08:12 AM

Is there a way to remove the banner from the login screen from the MultiTech login screen

Product: RF600VPN

Updated: 11/18/2004 12:39:25 PM

I have just updated my RF500S to firmware version V4.61. Prior to this firmware I was able to have 2 DNS server IP addresses, now I'm limited to 1. Is there a way I can add a second, if not, is there a way to revert back to an earlier version

Product: RF500S

Updated: 11/18/2004 12:36:01 PM

I recently upgraded the software / firmware in my RF500S to version 7.30 / 4.61, Was NAT removed I need to route several WAN IP's to internal machines (NAT).

Product: RF500S

Updated: 10/7/2004 3:02:29 PM

I receive 4 to 5 anti-virus email messages each day informing me that the virus pattern has been updated, how can I reduce these messages

Product: RF600VPN

Updated: 10/6/2004 2:50:35 PM

What port to use for http proxy.

Product: RF600VPN

Updated: 1/7/2004 12:57:29 PM

Packet filter was working fine. I enabled the HTTP proxy and I tried to block HTTP to a specific user but they are able to connect to the Internet through proxy. I also blocked the squid port to that user but still they connected to the Internet.

Product: RF660VPN

Updated: 1/7/2004 12:57:36 PM

I have a problem when enabling the intrusion detection on LAN,WAN,DMZ, it doesn't respond.

Product: RF660VPN

Updated: 1/7/2004 9:57:01 AM

What does the SMTP Proxy do Is it possible that email content can be scanned (eg. porn not viruses) as users send/receive them

Product: RF600VPN

Updated: 1/5/2004 1:20:27 PM

If I'm using the proxy, how can I block a user from browsing the Internet or using streaming audio, video (socks)

Product: RF660VPN

Updated: 1/5/2004 12:58:20 PM

I have observed the IPSec subsystems restart each time you add (or change) a VPN entry and then once again when the entry gets activated.

Products: RF650VPN, RF660VPN

Updated: 1/5/2004 3:18:06 PM

I have a pair of MTASR1-100 routers with 1 - 4 Meg SIMM running Firmware Version 2.21. What part number do I need to order to upgrade the memory to 8 Meg so I can upgrade the Firmware to 3.05 to match several other routers that we have

Product: MTASR1-100

Updated: 1/30/2004 2:58:52 PM

I am unable to find a place where I can set up a static IP address pool for dial-up clients. Can you instruct me how to do this

Product: MTASR3-200

Updated: 1/29/2004 12:21:39 PM

On the RF660VPN, is there a way to express multiple port numbers under services With all the port blocking required to stop back-door intrusions like for the new W32.Novarg.A@mm worm, it requires a block of TCP ports 3127 through 3198.

Product: RF660VPN

Updated: 1/29/2004 9:09:45 AM

Can I block multiple ports in one firewall entry or define a service as a list of many ports (not necessarily a range of ports)

Product: RF660VPN

Updated: 1/28/2004 1:03:44 PM

Does the RouteFinder support L2TP or IPSec tunnels with MultiCast traffic

Products: RF650VPN, RF660VPN

Updated: 1/26/2004 3:48:28 PM

How do I setup Windows so it can share and map a drive across a VPN tunnel

Product: RF650VPN

Updated: 1/26/2004 3:20:37 PM

RF600VPN or RF660VPN behind a NAT box doing IPSec Pass-Through in Manual Mode to another RF600VPN or RF660VPN.

Products: RF600VPN, RF660VPN

Updated: 1/26/2004 3:15:55 PM

RF600VPN or RF660VPN behind a NAT box doing IPSec Pass-Through in Manual Mode to an RF600VPN or RF660VPN.

Products: RF550VPN, RF600VPN, RF660VPN

Updated: 1/26/2004 3:23:48 PM

RF600VPN or RF660VPN connected to an RF550VPN / RF560VPN through a VPN tunnel configured for Manual Mode.

Products: RF550VPN, RF560VPN, RF660VPN, RF600VPN

Updated: 1/26/2004 3:12:44 PM

RF600VPN or RF660VPN connected to another RF600VPN or RF660VPN through a VPN tunnel configured for Manual Mode.

Products: RF600VPN, RF660VPN

Updated: 1/23/2004 2:31:36 PM

Windows IE needs to refresh after HTTP proxy authentication in order for the browser to display a Web page.

Product: RF660VPN

Updated: 1/22/2004 11:23:45 AM

I'm trying to put together an agreement with an ISP. They want a list of incoming TCP ports to open from the web. I will establish a VPN with multiple 550's, and a few PC's doing PPTP.

Product: RF660VPN

Updated: 1/22/2004 11:22:55 AM

Is there an on-demand function to force backup

Product: RF660VPN

Updated: 1/20/2004 2:53:50 PM

For 5 users (dynamic IP-ANY), how many VPN entries do I make in the RF660 for all 5 PCs to VPN in at the same time Can all 5 PCs use the same secret key (so there is only one entry in the 660 with that key), or do I set up 5 different secret keys

Product: RF660VPN

Updated: 1/20/2004 1:09:48 PM

Is it possible to setup the DMZ to have public IP addresses

Product: RF650VPN

Updated: 1/19/2004 4:45:01 PM

How to setup SNAT.

Product: RF660VPN

Updated: 9/9/2003 12:18:45 PM

Can I use a third party VPN client behind our RF660VPN

Product: RF660VPN

Updated: 9/8/2003 8:37:46 AM

I'm using the SMTP proxy for relaying mail to our internal mail system. I would like to set the message limit to a specific size, how do I alter the mail size limit

Product: RF650VPN

Updated: 9/8/2003 2:26:50 PM

Is this RouteFinder capable of more than 1 natted dynamic Sentinel connection

Product: RF600VPN

Updated: 9/30/2003 12:38:10 PM

I have enabled http proxy and am content filtering the URLs that are being accessed. Recently my users have been experiencing some problems and receive an ERROR page like this: ERROR The requested URL could not be retrieved.

Product: RF660VPN

Updated: 9/30/2003 10:37:40 AM

Can we set the virus scan to scan other TCP ports besides 25 (SMTP)

Product: RF600VPN

Updated: 9/30/2003 10:37:35 AM

Is there a log of what email the virus scan has blocked

Product: RF600VPN

Updated: 9/30/2003 11:02:32 AM

Does this RouteFinder support DDNS

Product: RF600VPN

Updated: 9/3/2003 9:54:16 AM

I have a wireless Routefinder and I have lost the install CD. How can I obtain the software off your site

Product: RF802EW

Updated: 9/3/2003 4:28:00 PM

I have a VPN WAN setup with an RF660 connecting to 8 RF550 units. Can the connection speed be increased by removing the IKE configurations and setting them back up manually

Product: RF660VPN

Updated: 9/3/2003 12:32:27 PM

How can I set up an RF660VPN for SMTP proxy but not be an OPEN SMTP relay The Last time I did it we were put in the RBL (Realtime black list).

Product: RF660VPN

Updated: 9/3/2003 12:32:30 PM

The HTTP Proxy category filters use Surfcontrol SDK 3.0. The Surfcontrol web site indicates there is a version 4. Will the RF660VPN upgrade to the newer version When

Product: RF660VPN

Updated: 9/3/2003 12:32:33 PM

I have a Routefinder installed in a basic firewall configuration and I plan to use the VPN Client software for access to our LAN through the internet. Can the Routefinder be configured for VPN access without interfering with it's current function

Product: RF660VPN

Updated: 9/3/2003 9:54:10 AM

How do I force users to use 192.168.1.1:3128 as their proxy

Product: RF660VPN

Updated: 9/26/2003 3:29:23 PM

How to restore webadmin access.

Product: RF600VPN

Updated: 9/25/2003 11:07:58 AM

Will the Windows XP dialup VPN client work with the RF550VPN

Products: RF550VPN, RF660VPN

Updated: 9/25/2003 11:07:54 AM

I'm looking for a low cost product to connect 2 LAN's together with different Subnets in same building.

Product: RF650VPN

Updated: 9/25/2003 3:22:09 PM

How do I activate the E-mail Anti-Virus protection

Product: RF650VPN

Updated: 9/25/2003 9:14:43 AM

How do I create a Telnet connection through the RouteFinder RF650VPN using DNAT and Aliasing

Product: RF650VPN

Updated: 9/25/2003 1:37:40 PM

PPP connect problem when calling into some ISP's.

Product: RF500S

Updated: 9/25/2003 12:26:17 PM

When I run Netmeeting with my RouteFinder, I can't receive inbound video or audio.

Product: RF500S

Updated: 9/25/2003 11:18:11 AM

Does this RASFinder require Windows software

Product: MTASR3-200

Updated: 9/25/2003 1:58:08 PM

I setup the RASFinder to connect through the radius server, but it is not authenticating clients.

Product: MTASR3-200

Updated: 9/24/2003 4:23:14 PM

What modem do I select for the WinMCSI modem descriptor(INF file)

Product: MTASR3-200

Updated: 9/19/2003 1:12:41 PM

I have the Internet Security Appliance, and I have a question. How do I setup a list of trusted Web sites that will not be blocked by the HTTP proxy filter. How can I over-ride the filter on a per Web site domain basis

Product: RF660VPN

Updated: 9/18/2003 10:34:37 AM

Example of the RF660VPN Configured as a Secure PPTP Server with a VPN PPTP Remote Client

Product: RF660VPN

Updated: 9/18/2003 10:34:31 AM

How to configure a Client-to-LAN Between an RF660VPN at Site A and an SSH Sentinel IP Client.

Product: RF660VPN

Updated: 9/18/2003 10:34:28 AM

How to configure a LAN-to-LAN VPN connection between an RF660VPN at Site A and an RF550VPN at Site B. Both RouteFinders using static IP addresses at their WAN port gateways.

Products: RF660VPN, RF550VPN

Updated: 9/18/2003 10:34:22 AM

How to configure a LAN-to-LAN VPN connection between Two RF660VPNs. One at Site A and one at Site B. Both RouteFinders using static IP addresses at their WAN port gateways.

Product: RF660VPN

Updated: 9/18/2003 10:35:03 AM

My RouteFinder is being bombarded with virus laden e-mails and the users are being notified, can I disable the user notification

Product: RF650VPN

Updated: 9/18/2003 10:34:17 AM

I need to reinstall the software on this RouteFinder, What brand and model number of CD Rom drive does this require, do you have them for sale

Product: RF650VPN

Updated: 9/18/2003 10:34:14 AM

We have the optional email anti-virus protection, how do we set the virus update time

Product: RF650VPN

Updated: 9/18/2003 10:33:39 AM

How do I set up PPTP server on the RF650VPN so remote Windows PPTP client can connect and access network resources behind the RF650VPN network

Product: RF650VPN

Updated: 9/18/2003 10:33:19 AM

How do I recover from a Hard Drive Failure on the RF650VPN

Product: RF650VPN

Updated: 9/18/2003 10:33:18 AM

How do I set up a LAN-to-LAN VPN connection using RouteFinders RF650VPN and RF550VPN Assuming RF650VPN has a static IP address and RF550VPN has a dynamic IP address

Product: RF650VPN

Updated: 9/18/2003 10:33:13 AM

How do I set up a LAN-to-LAN VPN connection using RouteFinders RF650VPN and RF550VPN Assuming both sites have public static IP address

Product: RF650VPN

Updated: 9/18/2003 10:33:10 AM

How do I setup Client-to-LAN VPN connections using a RouteFinder VPN

Product: RF650VPN

Updated: 9/18/2003 10:33:08 AM

How do I set up a LAN-to-LAN VPN connection using RouteFinder RF650VPN Assuming both sites have public static IP address

Product: RF650VPN

Updated: 9/18/2003 10:33:04 AM

How do I setup a Client-to-LAN VPN connection using RouteFinder 650VPN and an SSH Sentinel Client

Product: RF650VPN

Updated: 9/18/2003 10:34:48 AM

If I have more then one external (wan) IP address, is it possible to configure the RF600VPN so that I can use all my external IPs, (i.e. connect external IP 1 to my internal webserver 1 and external IP 2 to my internal webserver 2 and so on)

Product: RF600VPN

Updated: 9/17/2003 4:53:36 PM

I have the Internet Security Appliance and today google.com is blocked, how can I fix this

Product: RF660VPN

Updated: 9/17/2003 4:53:36 PM

Why in the RF660 firmware update did we lose the ability to use numerics and special characters in the administrative password Will that ability be coming out again

Product: RF660VPN

Updated: 9/17/2003 4:53:35 PM

DNS Proxy - The Admin Mail ID in the default zone has been changed to ( admin@yourdomain.com ).

Product: RF660VPN

Updated: 9/17/2003 4:53:35 PM

Backup Function changes.

Product: RF660VPN

Updated: 9/17/2003 4:53:35 PM

Web Admin Site Certificate - Spaces are now allowed for State, City Company and Organization unit.

Product: RF660VPN

Updated: 9/17/2003 4:53:35 PM

DHCP Client - If the IP address is changed during renewal, the configuration files are not updated properly.

Product: RF660VPN

Updated: 9/17/2003 4:53:35 PM

The virus scanner's log file ( kavscan.rpt ) has been included in logrotate.

Product: RF660VPN

Updated: 9/17/2003 4:53:35 PM

If there are SSH connections to the RouteFinder and the main SSHD gets killed, self monitor is not restarting SSHD.

Product: RF660VPN

Updated: 9/17/2003 4:53:35 PM

Virus Update - After the update from 2.94a to 3.0, the update time and date are not displayed on the Web GUI.

Product: RF660VPN

Updated: 9/17/2003 4:53:35 PM

System Updates - After a system update, the File Integrity Check Module sends mail it is not suppose to send.

Product: RF660VPN

Updated: 9/17/2003 4:53:35 PM

PPTP - PPP CPU % is going high if a client disconnect is not proper. After that, no other connection is allowed.

Product: RF660VPN

Updated: 9/17/2003 4:53:35 PM

POP3 Virus Scanners redirection rule has been changed so that it will always perform first regardless of any DNAT rules.

Product: RF660VPN

Updated: 9/17/2003 4:53:35 PM

Statistics & Logs -> SMTP Proxy - If you select from the left side menu once and then click again on the same (SMTP Proxy) it will give an error.

Product: RF660VPN

Updated: 9/17/2003 4:53:35 PM

Backup - The length of the comment field on the backup page has been limited to 100 characters.

Product: RF660VPN

Updated: 9/17/2003 4:53:35 PM

Network Intrusion Detection - The entry ANY from the Destination list box has been removed.

Product: RF660VPN

Updated: 9/17/2003 4:53:35 PM

IPTable ALLOW rules for ports 2049 (NFS), 2401 (CVS), 113 (identd), 139 (NetBIOS), 1812 - 1813 (Radius), 69 (TFTP) are removed from the chain ALLOW_PORTS. Now the rules for ports 2401, 139, 1812, 1813 are added in the AUTO_OUTPUT chain.

Product: RF660VPN

Updated: 9/17/2003 4:53:35 PM

HTTP Proxy authentication will now allow only one type (Local, Radius or SAM).

Product: RF660VPN

Updated: 9/17/2003 4:53:35 PM

IPSec - When adding new or editing an existing connection, the connections cannot be added with Local LAN = Any, Local LAN = None or Remote LAN = Any Anymore.

Product: RF660VPN

Updated: 9/17/2003 4:53:35 PM

PPTP - Static IP address assignment support for users.

Product: RF660VPN

Updated: 9/17/2003 4:53:28 PM

SARG report generation has been moved from cron.fivemins to cron.hourly.

Product: RF660VPN

Updated: 9/17/2003 4:53:27 PM

The ownership of ICMP services file was changed, so while adding ICMP services, error messages are displayed.

Product: RF660VPN

Updated: 9/17/2003 4:53:26 PM

Version Control - Clearing the options is not allowed.

Product: RF660VPN

Updated: 9/17/2003 4:53:26 PM

Virus Scanner - Two seperate controls have been added.

Product: RF660VPN

Updated: 9/17/2003 4:53:25 PM

If the DHCP client is not able to get an IP address, the IPSec route for eth1 is removed.

Product: RF660VPN

Updated: 9/17/2003 4:53:25 PM

PPTP must be restarted after adding users to the local database using the Web GUI.

Product: RF660VPN

Updated: 9/17/2003 4:53:25 PM

Group Name, Source Port and Protocol Services changes.

Product: RF660VPN

Updated: 9/17/2003 4:53:24 PM

Validation problem for Accepted Incoming Domains in SMTP Proxy.

Product: RF660VPN

Updated: 9/17/2003 4:53:24 PM

Zero ( 0 ) is not allowed in the 2nd and 3rd positions of the IP address for Gateway, WINS address, SAM PDC, SAM BDC, SMTP Proxy -> SMTP routes.

Product: RF660VPN

Updated: 9/17/2003 4:53:23 PM

Logon Page - The logo and version number on the initial logon page can be displayed / hidden with a configurable option in the Administration - Web Admin page.

Product: RF660VPN

Updated: 9/17/2003 4:53:21 PM

Packet Filters - Added a configurable option to enable / disable logging of packets that are destined for the RF660VPN and are discarded.

Product: RF660VPN

Updated: 9/17/2003 9:29:47 AM

How do I set up a Client-to-LAN PPTP connection using the PPTP server in RouteFinder RF650VPN with a RoadWarrior PPTP client

Product: RF650VPN

Updated: 9/17/2003 4:53:36 PM

The port scan livelog does not show the protocol used for scanning.

Products: RF600VPN, RF660VPN

Updated: 9/17/2003 4:53:36 PM

The weekly SNORT rule update has been removed.

Products: RF600VPN, RF660VPN

Updated: 9/17/2003 4:53:36 PM

SNORT binary and rules have been updated to the latest version (Version 2.0).

Products: RF600VPN, RF660VPN

Updated: 9/17/2003 4:53:36 PM

New weekly update rules were not compatiable with Old version of SNORT.

Products: RF600VPN, RF660VPN

Updated: 9/17/2003 4:53:36 PM

A patch has been issued for the RF600VPN and RF660VPN because of a Snort vulnerability.

Products: RF600VPN, RF660VPN

Updated: 9/17/2003 4:53:36 PM

The AH, ESP (encryption and authentication) keys cannot be entered as hexadecimal numbers any more. They must be entered as ascii characters.

Products: RF600VPN, RF660VPN

Updated: 9/17/2003 4:53:36 PM

An option to save a backup file to a local drive has been provided in the Tracking -> Backup page.

Products: RF600VPN, RF660VPN

Updated: 9/17/2003 4:53:36 PM

Virus database update - the last update, execute time is not getting displayed properly.

Products: RF600VPN, RF660VPN

Updated: 9/17/2003 4:53:36 PM

Restarting gets stuck (problem with removing the ip_conntrack module).

Products: RF600VPN, RF660VPN

Updated: 9/17/2003 4:53:36 PM

IPSec DH secret has leading zero.

Products: RF600VPN, RF660VPN

Updated: 9/17/2003 4:53:36 PM

IPSec tunnels do not come up properly after IPSec subsystem restarts Pluto.

Products: RF600VPN, RF660VPN

Updated: 9/17/2003 4:53:36 PM

Connecting from a Win XP PPTP client to a SQL database in the PPTP server's LAN is not working properly because of MTU problems.

Products: RF600VPN, RF660VPN

Updated: 9/17/2003 4:53:36 PM

IPTables is getting wiped out in some machines suddenly.

Products: RF600VPN, RF660VPN

Updated: 9/17/2003 4:53:36 PM

SMTP proxy stops working after the virus key expires.

Products: RF600VPN, RF660VPN

Updated: 9/17/2003 4:53:36 PM

PPP dial backup - If the backup link is up, and at that time, factory defaults are restored, the changes are not happening properly.

Products: RF600VPN, RF660VPN

Updated: 9/17/2003 4:53:36 PM

The DHCP server is not giving a DNS address to clients if DNS proxy is enabled in the RF600.

Products: RF600VPN, RF660VPN

Updated: 9/17/2003 4:53:36 PM

IPTable rule for DHCP was not present by default even if DHCP server is enabled by default. Added it. Also, if DHCP server is enabled and if the rule is not present, it will be added now.

Products: RF600VPN, RF660VPN

Updated: 9/17/2003 4:53:36 PM

pptpd was getting restarted suddenly.

Products: RF600VPN, RF660VPN

Updated: 9/17/2003 4:53:36 PM

The IP address of pppd shown in ps aux is not matching with pptpuser file.

Products: RF600VPN, RF660VPN

Updated: 9/17/2003 4:53:36 PM

255 was not allowed in the second and third octets of IP addresses.

Products: RF600VPN, RF660VPN

Updated: 9/17/2003 4:53:36 PM

Kaspersky's configuration files have been included in backup.

Products: RF600VPN, RF660VPN

Updated: 9/17/2003 4:53:36 PM

In SMTP Proxy -> SMTP routes, an entry adldata.com cannot be added if there is an entry mail.adldata.com already present.

Products: RF600VPN, RF660VPN

Updated: 9/17/2003 4:53:36 PM

SOCKS log messages include details about the data that is being transferred. Removed printing of those log messages.

Products: RF600VPN, RF660VPN

Updated: 9/17/2003 4:53:36 PM

Yahoo messenger is not working with SOCKS proxy version 5 and authentication enabled.

Products: RF600VPN, RF660VPN

Updated: 9/17/2003 1:18:35 PM

Async port and cross over cable method of upgrading firmware.

Product: RF500S

Updated: 9/17/2003 1:18:30 PM

I want to increase security, so how do I disable all remote administration to my RouteFinder Does your RouteFinder have a master password

Product: RF500S

Updated: 9/17/2003 1:18:27 PM

How do I allow this RouteFinder to pass through information for a group of ports

Product: RF500S

Updated: 9/17/2003 1:18:24 PM

We have installed the RF500S and found that if accessing POP3 (Port 110) via the RF500S to the Internet, then it will time out.

Product: RF500S

Updated: 9/17/2003 1:18:16 PM

We can't access web based Management of our RouteFinder.

Product: RF500S

Updated: 9/17/2003 1:18:13 PM

Can I clone or change the MAC address on the WAN port

Product: RF500S

Updated: 9/17/2003 1:18:11 PM

I can't remotely manage and configure the RouteFinder from my office PC . Also I'm not able to telnet to the RouteFinder using the global IP.

Product: RF500S

Updated: 9/17/2003 1:18:09 PM

Support for multiple WOWcall users.

Product: RF500S

Updated: 9/17/2003 1:17:57 PM

Support for multiple dialpad users.

Product: RF500S

Updated: 9/17/2003 1:17:56 PM

Loopback problem when name is www.xxx.xxx or mail.xxx.xxx.

Product: RF500S

Updated: 9/17/2003 1:17:55 PM

Problem with mIRC pass-thru.

Product: RF500S

Updated: 9/17/2003 1:17:54 PM

PPPoE reconnect problems on some ISP's.

Product: RF500S

Updated: 9/17/2003 1:17:54 PM

PPPoE Confirm packet error check.

Product: RF500S

Updated: 9/17/2003 1:17:53 PM

PPPoE LCP rejects if remote MRU > 1492..

Product: RF500S

Updated: 9/17/2003 1:17:53 PM

PPPoE initial connection problem with some ISP in France.

Product: RF500S

Updated: 9/17/2003 1:17:52 PM

It will not receive any RIP packets.

Product: RF500S

Updated: 9/17/2003 1:17:51 PM

Problem when using Activate PPP ACCM (LCP) negotiation.

Product: RF500S

Updated: 9/17/2003 1:17:50 PM

Problem when using Unix traceroute and UDP.

Product: RF500S

Updated: 9/17/2003 1:17:50 PM

Problem when remote access does not assign dynamic DNS from ISP.

Product: RF500S

Updated: 9/17/2003 1:17:49 PM

Problem when remote access is enabled and IP is assigned by an external DHCP server.

Product: RF500S

Updated: 9/17/2003 1:17:48 PM

FTP file transfer problems when using PPP async dialup link.

Product: RF500S

Updated: 9/17/2003 1:17:47 PM

When I setup virtual server using port zero (DMZ), it is not able to handle higher port numbers properly.

Product: RF500S

Updated: 9/17/2003 1:17:41 PM

LCP NAK packet length error.

Product: RF500S

Updated: 9/17/2003 1:17:38 PM

PPPoE connect problem when the ISP is trying to negotiate using MLPPP.

Product: RF500S

Updated: 9/17/2003 1:17:33 PM

The RF500S has a problem with IPsec pass-thru when using a Nortel client.

Product: RF500S

Updated: 9/17/2003 1:24:38 PM

Fixed an upgrade problem when installing on the same directory.

Product: MTASR3-200

Updated: 9/17/2003 1:24:31 PM

Terminal Server: After 3 unsuccessful password or username validation attempts the call is disconnected.

Product: MTASR3-200

Updated: 9/17/2003 1:24:30 PM

Terminal Server:- User was being forced to re-login after a successful/unsuccessful telnet session.

Product: MTASR3-200

Updated: 9/17/2003 1:24:30 PM

Terminal Server: - Could not display large information after establishing a telnet session.

Product: MTASR3-200

Updated: 9/17/2003 1:24:30 PM

ARP Issue - Interoperability with CISCO Router: The CISCO router broadcasts a Reply ARP with the same source and destination IP address.

Product: MTASR3-200

Updated: 9/17/2003 1:24:29 PM

I can't get WinMsci to work with my RASFinder and have been having problems with the connection not being made. The line comes back as busy and the RASFinder never dials out.

Product: MTASR3-200

Updated: 9/17/2003 1:24:27 PM

RAS is not answering calls after a few days of operation.

Product: MTASR3-200

Updated: 9/17/2003 1:24:26 PM

Modem connect speed messages are not recorded in the general log.

Product: MTASR3-200

Updated: 9/17/2003 1:24:26 PM

The TCP / UDP port numbers in the User Database filter setup accepts values greater than 65535.

Product: MTASR3-200

Updated: 9/17/2003 1:24:26 PM

Support for WINS servers added.

Product: MTASR3-200

Updated: 9/17/2003 1:24:25 PM

The user database log page may not show all information if the log size is large.

Product: MTASR3-200

Updated: 9/17/2003 1:24:25 PM

Multiple people using a Web browser for configuration may cause a lockout.

Product: MTASR3-200

Updated: 9/17/2003 1:24:25 PM

Node address configuration for WAN ports was allowed even if the remote port is of the Client-Only type.

Product: MTASR3-200

Updated: 9/17/2003 1:24:25 PM

Enabling / Disabling the Ethernet port via a Telnet session.

Product: MTASR3-200

Updated: 9/17/2003 1:24:25 PM

Does this RASFinder support callback (for security purposes) on a Windows 2000 / XP remote user PC

Product: MTASR3-200

Updated: 9/17/2003 1:24:25 PM

User Database filter changes through TFTP are not working properly.

Product: MTASR3-200

Updated: 9/17/2003 1:24:25 PM

User Database accounting information is not displayed correctly.

Product: MTASR3-200

Updated: 9/17/2003 1:24:25 PM

User Database filters are getting deleted upon reset.

Product: MTASR3-200

Updated: 9/17/2003 1:24:22 PM

Authentication fails, user1 and other alphanumeric usernames / passwords work. Error 734

Product: MTASR3-200

Updated: 9/17/2003 1:24:17 PM

Is it possible to set these up so that they assign dial-in clients a WINS server assignment

Product: MTASR3-200

Updated: 9/17/2003 1:24:15 PM

We are able to dial into our network with all our field laptops, but not the Jornada running Windows CE.

Product: MTASR3-200

Updated: 9/17/2003 1:24:03 PM

How do I set time limits (disconnect time) for the dial-in clients

Product: MTASR3-200

Updated: 8/6/2003 2:35:23 PM

What can be surveyed with SNMP in the RouteFinder

Product: RF660VPN

Updated: 8/5/2003 4:08:02 PM

How do I block inbound ICMP echo requests with my RouteFinder

Product: RF660VPN

Updated: 8/5/2003 4:07:58 PM

I have the upgrade kit and want to know if it is possible for me to install a new hard drive in the RF650 box and load the new RF660 software on it, instead of wiping out my current hard drive I want to have a fallback to my existing hard drive.

Product: RF660VPN

Updated: 8/29/2003 10:36:25 PM

I Need all the steps to allow PCAnywhere through the RouteFinder.

Product: RF660VPN

Updated: 8/29/2003 10:36:31 PM

What happens when an email that contains a virus is detected Does the recipient receive a message about it

Product: RF600VPN

Updated: 8/27/2003 6:33:28 PM

My company uses an RF660 at our main location and RF550 at our branch locations. Is there some reporting on the VPN For example up-time statistics for the site so that a user could log into the RF660 and tell if there are any trouble sites.

Product: RF660VPN

Updated: 8/27/2003 8:50:22 AM

I have upgraded an RF650 to an RF660, but when I import the RF650 backup file, the RF660 responds with an error message.

Product: RF660VPN

Updated: 8/27/2003 6:33:11 PM

Can we setup 150 PPTP tunnels on the RF600 What is the number of PPTP tunnels that will work simultaneously

Product: RF600VPN

Updated: 8/19/2003 4:22:07 PM

I installed an RF660 VPN (note this was originally a 650 that had been upgraded) last week. After 1 week of operation it is reporting disk full errors on the log partition.

Product: RF660VPN

Updated: 8/19/2003 1:44:00 PM

How can I view the anti-virus filtered emails that the anti-virus software retains on the router We're getting messages about viruses being caught while being sent, but I want to see the actual headers to find out which system it's coming from.

Product: RF650VPN

Updated: 7/7/2003 12:46:20 PM

If I don't have the SSH client, how can I do the backup

Products: RF660VPN, RF600VPN

Updated: 7/7/2003 12:39:44 PM

I have an RF660VPN in the host office and 3 remote plants with RF550VPN's. I want to browse the network as if they are local. I know that an RF550VPN to RF550VPN can do this with it's NetBIOS broadcast option, can the RF660VPN or RF600VPN

Products: RF660VPN, RF600VPN

Updated: 7/29/2003 1:34:52 PM

Radius stop record does not show the proper number of bytes transfered.

Product: MTASR3-200

Updated: 7/28/2003 1:27:49 PM

The category filters are blocking http://www.mcknightsonline.com, the test says that the site is in our most recent Productivity filters. I don't know which of the listed categories it is in so that I can unblock only that item.

Product: RF660VPN

Updated: 7/28/2003 11:35:30 AM

How can I change the MAC address of the RasFinder

Product: MTASR3-200

Updated: 7/2/2003 1:43:25 PM

URL filtering doesn't seem to work on the DMZ port. I have Web access through this port but all Web sites can be accessed and nothing is blocked.

Product: RF600VPN

Updated: 7/18/2003 3:08:27 PM

We have RouteFinder 550 and I would like to use an external IP address on the LAN side. Can I do that on a RouteFinder 550

Products: RF550VPN, RF600VPN

Updated: 7/18/2003 3:46:06 PM

What is the port number used by the RASfinder for RADIUS Our client uses port 1645 for their RADIUS server and port 1646 for their accounting server. How do we change the default port number of RADIUS used by the RASfinder to 1645 and 1646

Product: MTASR3-200

Updated: 7/17/2003 9:02:34 AM

Does the RF802EW support H.323 (H323)

Product: RF802EW

Updated: 7/17/2003 1:29:23 PM

I have an office that needs 4 PCs to create a remote VPN session to the main office VPN server. Which one of your products will allow me to have more than one remote VPN session

Product: RF660VPN

Updated: 7/17/2003 9:02:27 AM

Does the RouteFinder have a drive that it uses for caching Web sites How can it be turned off

Product: RF650VPN

Updated: 7/16/2003 10:46:28 AM

I would like to assign a specific user an IP address, and let the RASFinder get this IP address from Radius. All other users get the IP address that is assigned to the WAN ports. Is this possible

Product: MTASR3-200

Updated: 7/1/2003 2:09:37 PM

How to delete quarantined virus & logs files on the RouteFinder.

Product: RF650VPN

Updated: 6/9/2003 2:24:08 PM

I have seen this message (alert) a few times, what exactly does this mean How to read intrusion log.

Product: RF660VPN

Updated: 6/9/2003 9:16:22 AM

I need help with packet filter rules for an RF660 I have configured as a router with a server that sits in the DMZ. The server that is in the DMZ is an HTTP server, SSH, POP3 and SMTP. Basically mail can be received but cannot be sent.

Product: RF660VPN

Updated: 6/9/2003 9:15:55 AM

Can the RF660VPN trace all incoming and outgoing email including attachments, visited WEB sites and downloaded files. Does it store this information in a file that can be read and copied to a PC on the LAN

Product: RF660VPN

Updated: 6/9/2003 9:15:34 AM

How can we configure the RouteFinder so more than one user at a time connects through PPTP

Product: RF660VPN

Updated: 6/9/2003 9:15:31 AM

Are the config backup zip files from the RF660VPN compatible with the RF600VPN

Product: RF660VPN

Updated: 6/9/2003 9:16:12 AM

I want to make a VPN tunnel between an RF650VPN and a Netgear FVS318, are they compatible What happens if at the other end, I have to configure the Local IPSec Identifier and remote IPSec Identifier

Product: RF650VPN

Updated: 6/9/2003 9:16:18 AM

Our server sends regular UDP broadcast, will it be able to reach the VPN clients

Products: RF550VPN, RF600VPN, RF650VPN, RF660VPN

Updated: 6/3/2003 3:24:09 PM

RF600VPN and RF660VPN software live update procedure.

Product: RF660VPN

Updated: 6/3/2003 12:55:13 PM

What is the power specification for this RasFinder

Product: MTASR3-200

Updated: 6/27/2003 8:00:03 AM

Does the IPSec client software require licence approval from the RouteFinderVPN gateway when installed on the remote access client When installing the IPSEC client software does it ask for the license key of the RouteFinderVPN

Product: RF660VPN

Updated: 6/26/2003 5:07:22 PM

Can I place a two line VOIP solution behind an IPSEC VPN connection

Product: RF600VPN

Updated: 6/24/2003 5:48:00 PM

Does the RouteFinder support Host Header Name for IIS

Product: RF650VPN

Updated: 6/19/2003 8:00:01 AM

We have to uninstall the Cisco VPN client software in order to get SSH Sentinel to install properly.

Product: RFIPSC

Updated: 6/18/2003 9:53:11 AM

I have an RF660 and the remote administration (ssh) has been turned off, how do I turn it back on

Product: RF660VPN

Updated: 6/16/2003 3:07:29 PM

I have my E-mail address in as the admin E-mail but I haven't received any config files. I've gone to the backup utility and put in a description and hit save but no backup is sent via E-mail.

Product: RF660VPN

Updated: 6/16/2003 3:07:20 PM

What is the processor speed of the RasFinder

Product: MTASR3-200

Updated: 6/13/2003 8:56:15 AM

Can I configure two Internet access (xDSL and dedicated Internet) using an RF660VPN I need this solution for load balancing or fail over.

Product: RF660VPN

Updated: 6/13/2003 8:34:22 AM

I have an RF650VPN and an RF550VPN and I'm trying to setup a VPN with Manual Key selections. The VPN's say they are connected, but on the RF650, the connection says onhold on the IPSEC Live Log.

Product: RF650VPN

Updated: 6/13/2003 9:03:33 AM

It would be helpful to have a dynamic DNS client included in the RF600VPN, are there plans to include a client Which client software do you recommend

Product: RF600VPN

Updated: 6/13/2003 8:26:31 AM

I'm installing MCSI on an XP system, but when I add a port, I receive an error message saying there is no modem.

Product: MTASR3-200

Updated: 6/12/2003 1:22:00 PM

I configured the RF660 and everything was working until I added a static route. After that I am unable to access the HTTP interface. Is there anyway I can delete this route using the command prompt

Product: RF660VPN

Updated: 6/12/2003 12:07:09 PM

What is the power consumption of the RouteFinderVPN

Product: RF660VPN

Updated: 5/30/2003 4:35:19 PM

Concerning the dial backup using the built-in modem , I noticed in the PPP page in the RF660 software that we must choose the serial port, how can I use the built-in modem for the PPP backup (by putting a line directly in the RJ 11 port)

Product: RF660VPN

Updated: 5/30/2003 4:26:16 PM

Does the RF600VPN support single DES

Product: RF600VPN

Updated: 5/28/2003 4:01:30 PM

Two users are trying to log on to the VPN at the same time from the same network, but they receive an error message.

Products: RF660VPN, RF650VPN

Updated: 5/28/2003 1:08:48 PM

I noticed that firmware version 4.64 adds AES Encryption to the RF550VPN. Are there plans to add this method to the RF600/RF660VPN RouteFinders

Products: RF600VPN, RF660VPN

Updated: 5/19/2003 2:25:16 PM

The RouteFinder was working properly for Internet access and a VPN, but when I added rules for Internet access (none to VPN), the tunnel failed.

Products: RF650VPN, RF660VPN

Updated: 5/19/2003 3:34:58 PM

We've recently bought an RF600VPN. However, we didn't get the DMZ to work. Do you have an example how to install a server in the DMZ-area in order to make it publicly available Currently we need to make a HPPTS-server publicly available.

Product: RF600VPN

Updated: 5/19/2003 2:47:55 PM

Is the RF500S compatible with the RF550VPN Can I upgrade the RF500S with the RF550VPN firmware or is it different

Product: RF500S

Updated: 5/16/2003 10:25:06 AM

Do you have settings for the RouteFinder that allows it to forward mail to a mail relay (mailhost) instead of trying to resolve domain's MX records

Product: RF650VPN

Updated: 5/15/2003 2:13:04 PM

Can we use the RF660 with a static public IP & remote client (standalone PC ) with dynamic public IP We have a leased line Internet to our HO, But all telecommuters & branch users are using dialup connection & they will get dynamic IPs from ISP.

Product: RF660VPN

Updated: 4/28/2003 2:40:11 PM

Is there some precedence in the rules How does the firewall make the decision about the rules placed in the packet filters configuration

Product: RF650VPN

Updated: 4/24/2003 9:24:35 AM

I have a couple of RF500s devices and I would like to allow my users to use a Webcam. How can I make it work

Product: RF500S

Updated: 4/23/2003 2:41:07 PM

Can I adapt the antennas for an extension to feed two or three additional indoor antennas less than 50' from Router / App

Product: RF802EW

Updated: 4/22/2003 10:39:05 AM

What is the difference between the RF600 and the RF660

Product: RF600VPN

Updated: 4/22/2003 10:51:19 AM

I setup a client on a network behind an RF500S and an ISDN link to the Internet to VPN into my main network. I am using Netscreen (IPsec) and the RF500S is setup for Internet connection, but I can't get return communications from the main network.

Product: RF500S

Updated: 4/20/2003 9:10:04 AM

What additional Multi-Tech products are needed to connect the RouteFinder to an ISDN dial backup

Product: RF600VPN

Updated: 4/20/2003 9:09:58 AM

Is the RouteFinder rack mountable to a 19 inch rack What space to they take up on a rack; 1U, 1/2U, 2U

Product: RF600VPN

Updated: 4/2/2003 9:29:52 AM

We normally use the same preshared key for authentication in both RF660's that will tunnel to each other. However, it also offers RSA Signature as an alternative to a preshared key, how do I use RSA Signature for authentication on the RF660VPN

Products: RF660VPN, RF550VPN

Updated: 4/17/2003 12:58:12 PM

I want to block certain websites, Do I need to add each private IP address and create a packet filter rule

Product: RF650VPN

Updated: 4/17/2003 4:29:47 PM

I use an extranet client with the RF500S to access my company Intranet information. My wife also uses an extranet client to access her company Intranet, but she has been unable to connect to her Intranet service through my RF500S network.

Product: RF500S

Updated: 4/16/2003 2:55:03 PM

Does the RASFinder support CISCO PIX501

Product: MTASR3-200

Updated: 4/16/2003 2:54:56 PM

Can the RASFinder be configured thru Windows XP

Product: MTASR3-200

Updated: 4/15/2003 11:04:11 AM

Does the RF802EW Access Point support port numbers of UDP 1645 and UDP 1644 If Radius is located behind the RF802WE, can it pass these ports

Product: RF802EW

Updated: 4/14/2003 5:17:34 PM

After upgrading our RF650 unit to an RF660, PPTP to a Windows 2000 client works OK, but not to a Windows 98 client.

Product: RF660VPN

Updated: 4/14/2003 9:52:30 PM

I was backing up the ini files for the RASFinder and noticed that one of them had OSPF information in it. Is this file used to configure OSPF on the RASfinder

Product: MTASR3-200

Updated: 4/11/2003 4:33:22 PM

I have a login / password setup in the VPN that is different than my W2k server domain, I get an additional login request to log into the domain, but it refuses my domain login / password. Can I have different login / passwords in the VPN / domain

Product: RF660VPN

Updated: 3/6/2003 1:46:50 PM

Do I need to do anything special to connect 2 RF660's together if one has a dynamic IP

Product: RF660VPN

Updated: 3/6/2003 3:41:44 PM

What is the purpose of Perfect Forward Secure (PFS)

Product: RF650VPN

Updated: 3/6/2003 2:22:09 PM

My RouteFinder won't come up and the reset light is on, what does that mean

Product: RF650VPN

Updated: 3/5/2003 3:39:49 PM

Does your Wireless RouteFinder have a battery power option

Product: RF802EW

Updated: 3/4/2003 9:25:44 AM

Does this RouteFinder support DHCP client on the WAN ethernet port

Product: RF660VPN

Updated: 3/4/2003 3:38:15 PM

How can I remove the Users Authentication setting for SAM NT/2k

Product: RF650VPN