Resolutions

I'm trying to do a remote loop back and I keep getting and error on AT&T6, what is the procedure

Products: MT5634ZBA, MT5634ZBA, MT5634ZBA-DID, MT5634ZBA-V92, MT5634ZPX, MT5634ZPX-PCI, MT5634ZPX-PCI-V92, MT5656ZDX, MT5656ZDXV

Does the MT5656ZDX support Super G3 Fax

Products: MT5656ZDX, MT5656ZDXV, MT5600ZDX, MT5600ZDXV, MT5634ZBA-V-V92, MT5634ZBA-V92, MT5634ZBA-USB-V92, MT9234ZBA, MT9234ZBA-V, MT9234ZBA-USB

Does this modem work with Vista

Products: MT5656ZDXV, MT5656ZDX

FlashWizard does not see HEX file

Products: FlashWizard, MT2834BA, MT2834BL, MT2834BLR, MT2834BR, MT2834ZDXb, MT2834ZPX, MT3334SMI, MT3400SMI, MT5600BA, MT5600BA-V92, MT5600BL, MT5600SMI, MT5600ZDX, MT5600ZDXV, MT5634MU, MT5634SMI, MT5634SMI-P, MT5634ZBA, MT5634ZBA-USB, MT5634ZBA-USB-V92, MT5634ZBA-V92, MT5634ZPX-PCI, MT5634ZPX-PCI-V92, MT5656ZDX, MT5656ZDXV

What are the ratings / specifications of the power supply

Products: MT2834ZDXb, MT5634ZBA, MT5600ZDX

Where can I get a replacement power supply transformer for my MultiModem

Products: MT2834BA, MT1432BA, MT1432BL, MT1932BL, MT1932ZDX, MT202TD, MT2834BL, MT2834PCS, MT2834PCS2, MT2834ZDXb, MT2834ZDXb-U, MT3334ZDX, MT5600BA, MT5600BA-V92, MT5600BL, MT5600DSVD, MT5600DSVD2, MT5600ZDX, MT5600ZDXV, MT5634IND, MT5634MSV, MT5634MU, MT5634ZBA, MT5634ZBA-DID, MT5634ZBA-USB-V92, MT5634ZBA-USB, MT5634ZBA-V-V92, MT5634ZBA-V92, MT5656ZDX, MT5656ZDXV, MT932xx, MTA128NT, MTA128ST, MTA128ST-USB

Does this modem support Hardware CTS/RTS flow control

Products: MT5600ZDX, MT5600ZDXV

The $SB command is not available on this model. How do I set the serial (baud rate) port speed on this modem to 9600 bps

Products: MT5656ZDX, MT5656ZDXV

Problems sending faxes using Windows Vista Ultimate and Business editions only. Partial pages, or multiple repeated pages are sent.

Products: MT5634ZBA-V92, MT5634ZBA, MT5600BA, MT5600BA-V92, MT5600BL, MT5600BR-V92, MT5600ZDX, MT5600ZDXV, MT5634IND, MT5634MSV, MT5634MU, MT5634ZBA-USB, MT5634ZBA-USB-V92, MT5634ZBA-V-V92, MT5634ZPX, MT5634ZPX-PCI, MT5634ZPX-PCI-U, MT5634ZPX-PCI-V92, MT5656ZDX, MT5656ZDXV, MT5600DSVD, MT5600DSVD2

We are unable to issue the command '+flo' to the modem.

Product: MT5656ZDX

Does this modem support Reverse mode

Products: MT5634ZBA, MT5600BA, MT5600BA-V92, MT5600BL, MT5600BR-V92, MT5600DSVD, MT5600DSVD2, MT5600ZDX, MT5600ZDXV, MT5634IND, MT5634MSV, MT5634MU, MT5634ZBA-DID, MT5634ZBA-USB, MT5634ZBA-USB-V92, MT5634ZBA-V-V92, MT5634ZBA-V92, MT5634ZPX, MT5634ZPX-PCI, MT5634ZPX-PCI-U, MT5634ZPX-PCI-V92, MT5656ZDX, MT5656ZDXV

Is it possible for the modem to receive multiple faxes simultaneously

Products: MT5634ZBA-V92, MT2834BA, MT2834BC, MT2834BL, MT2834BLR, MT2834BR, MT2834PCS, MT2834PCS2, MT2834ZDXb, MT2834ZDXb-U, MT2834ZPX, MT3334ZDX, MT5600BA, MT5600BA-V92, MT5600BL, MT5600BR-V92, MT5600DSVD, MT5600DSVD2, MT5600SMI, MT5600ZDX, MT5600ZDXV, MT5634IND, MT5634MSV, MT5634MU, MT5634SMI, MT5634ZBA, MT5634ZBA-DID, MT5634ZBA-USB, MT5634ZBA-USB-V92, MT5634ZBA-V-V92, MT5634ZPX, MT5634ZPX-PCI, MT5634ZPX-PCI-U, MT5634ZPX-PCI-V92, MT5656ZDX, MT5656ZDXV

Is it possible to disable command mode on this modem On some modems there was a command %DCn that controlled command mode, but I haven't found the same command on the MT5656ZDX.

Products: MT5656ZDX, MT5656ZDXV

What is the power consumption(watts) and heat dissipation (btu/hr) for this modem

Product: MT5600ZDX

Does this modem support V.23

Product: MT2834ZDXb

When you send a fax with WinFax PRO 10.xx, you may see this error message 'Fax/Modem Alert: error setting up your communication port state'.

Products: MT5634ZBA, MT5634ZBA-USB, MT5634ZBA-USB-V92, MT5634ZBA-V-V92, MT5634ZBA-V92, MT5634IND, MT5634MSV, MT5634MU, MT5634SMI, MT5634SMI-34, MT5634SMI-92, MT5600BA, MT5600BA-V92, MT5600BL, MT5600BR-V92, MT5600SMI, MT5600SMI-32, MT5600SMI-34, MT5600SMI-92, MT5600ZDX, MT5600ZDXV

MT2834xx / MT5600xx Command Cross Reference Guide

Products: MT2834BA, MT2834BC, MT2834BL, MT2834BLR, MT2834BR, MT2834ZDXb, MT2834ZDXb-U, MT2834ZPX, MT5600BA, MT5600BA-V92, MT5600BL, MT5600BR-V92, MT5600DSVD, MT5600DSVD2, MT5600ZDX, MT5600ZDXV

MT2834xx / MT5634xx Command Cross Reference Guide

Products: MT2834BA, MT2834BC, MT2834BL, MT2834BLR, MT2834BR, MT2834ZDXb, MT2834ZDXb-U, MT2834ZPX, MT5634IND, MT5634MSV, MT5634MU, MT5634ZBA, MT5634ZBA-DID, MT5634ZBA-USB, MT5634ZBA-USB-V92, MT5634ZBA-V-V92, MT5634ZBA-V92, MT5634ZPX, MT5634ZPX-PCI, MT5634ZPX-PCI-U, MT5634ZPX-PCI-V92

Does this modem support Leased Line operation

Products: MT2834ZDXb, MT2834ZDXb-U, MT3334ZDX, MT1932ZDX, MT5600ZDX, MT5600ZDXV

Is the MT3334ZDX Flash upgradable

Product: MT3334ZDX

Fixed - A problem where some Class 2 faxes were reporting 'FHNG:25'.

Products: MT5600BA, MT5600BL, MT5600ZDX, MT5600ZDXV, MT5600BA-V92

Does this modem support V.23 HALF DUPLEX

Products: MT5600ZDX, MT5600ZDXV, MT5600BA, MT5600BA-V92, MT5600BL, MT5600DSVD, MT5600DSVD2

How can I find out if my modem is RoHS compliant

Products: MT5600BA-V92, MT5634ZBA-USB-V92, MT5634ZBA-V-V92, MT5634ZBA-V92, MT5656ZDX, MT5656ZDXV

Does this modem support remote configuration

Products: MT5600ZDX, MT3400SMI, MT5600ZDXV, MT5600DSVD, MT5656ZDXV, MT5600ZDX, MT5656ZDX, SC336H1

Is this modem able to detect DTMF tones in order to use DID with Zetafax

Products: MT5656ZDX, MT5656ZDXV

I'm having a problem detecting a stuttered dialtone. I only get the regular dialtone report, 'd', because the stutterd dialtone is only active for a second, and then reverts to regular dialtone.

Product: MT5656ZDXV

I am unable to install the auto answer command string AT%R1&W0 on a new MT5600ZDXe, however I can install the command string on a MT5634ZBA. FYI, The command string is used in conjunction with Cisco equipment.

Product: MT5600ZDX

To mute the speaker in voice mode.

Product: MT5600ZDXV

How do I disable/enable command mode

Products: MT2834ZDXb, MT1932ZDX

MT5600xx / MT5656xx Command Cross Reference Guide

Products: MT5600BA, MT5600BA-V92, MT5600BL, MT5600BR-V92, MT5600DSVD, MT5600DSVD2, MT5600ZDX, MT5600ZDXV, MT5656ZDX, MT5656ZDXV

When I send the command AT>DT1 to enable DTMF tone detection I receive an error message.

Product: MT1932ZDX

Can we extend the amount of time that the comma will give us in the pause Specifically we need three seconds.

Products: MT2834BL, MT2834BA, MT2834BC, MT2834BLR, MT2834BR, MT5600ZDX, MT5600ZDXV, MT5634ZBA, MT5634ZBA-DID, MT5634ZBA-USB, MT5634ZBA-USB-V92, MT5634ZBA-V-V92, MT5634ZBA-V92

Fixed - An AT#BDR no response problem. The Voice command 'Select Baud Rate' now works.

Products: MT5600ZDX, MT5600ZDXV

With the EuroNam country setting, if the remote modem would not answer a call, the 'No answer' message would be displayed. The code was changed so the 'No Carrier' message is displayed instead.

Product: MT5600ZDX

The escape sequence was changed so if an attempt to escape is unsuccessful, the modem will no longer display the message 'CONNECT'.

Product: MT5600ZDX

I have a New Zealand modem and I am trying to set the number of rings before it answers to 8. To do this I am changing register 'S0'. I am able to change this to any number between 0 & 4, but any higher and it ignores the command. Any ideas

Product: MT5600ZDXV

Windows 2000 states 'Cannot find security catalog file' and will not install modem

Products: MT5634ZBA, MT5600BA, MT5600BA-V92, MT5600BL, MT5600DSVD, MT5600DSVD2, MT5600ZDX, MT5600ZDXV, MT5634MSV, MT5634MU, MT5634ZBA-DID, MT5634ZBA-USB, MT5634ZBA-USB-V92, MT5634ZBA-V92, MT5634ZLX, MT5634ZLX-E, MT5634ZLX-FE, MT5634ZPX, MT5634ZPX-PCI, MT5634ZPX-PCI-V92, MT5656ZDX, MT5656ZDXV, MT5634ZPW, MT5634HD16, MT5634HD8, MT5634SMI, MT5634SMI-92, MT5634SMI-DK, MT5634SMI-IP, MT5634SMI-P, MT5634SMI-P-92

Is it possible to make a call with 'DTR Dialing' using the AT$D1 command

Products: MT5600ZDX, MT5600ZDXV, MT5656ZDX, MT5656ZDXV, MT5600DSVD, MT5600DSVD2

Sending an ATDT123456 dial command causes the modem module to send the result code 'ERROR'.

Products: MT5634SMI, MT3334ZDX, MT5634SMI-IP, MT2834ZDXb, MT2834BA, MT2834BL, MT2834BLR, MT2834BR, MT1432BA, MT1432BL, MT1432BLR, MT224xx, MT1932BL, MT1932PCS, MT1932ZDX, MT1432MU, MT1432PCS, MT1432PCS2, MT1432PCS3

Is the MT5656ZDX compatible with Fax Class 2 and 2.0

Products: MT5656ZDX, MT5656ZDXV

Fixed - A false tone detect problem. Now the modem will not detect false numbers or characters while in voice mode.

Products: MT5600ZDX, MT5600ZDXV

Fixed - The modem is now able to detect Caller ID correctly after an AT#VLS=0 command.

Products: MT5600ZDX, MT5600ZDXV

Fixed - The S10 register (sets how long a carrier signal must be lost before the modem disconnects) was not working.

Products: MT5600ZDX, MT5600ZDXV

Changed - S11 now controls the DTMF tone length for all countries. Previously, this was enabled for Japan and the U.S. only.

Products: MT5600ZDX, MT5600ZDXV

Fixed - The sleep inactivity timer (S24) now works.

Product: MT5600ZDX

Fixed - A message playback problem. The modem was unable to clearly playback messages through the local handset in 8-bit PCM.

Product: MT5600ZDX

Fixed - The +FDCC & +FDIS inquiry was not reporting the correct BR (bit rate) parameter if BR was set to 2 or 4. If BR parameter is set to 2 or 4, a query will display 3 or 5 respectively.

Product: MT5600ZDX

The MT5600ZDX now correctly reports the fax class 2 line count (+FPTS).

Product: MT5600ZDX

Fixed - An error correction problem. When LAPM error correction is forced on the MT5600ZDX, it is not able to answer calls from USR modems. 30% fail to connect to USR Modems at 2400 baud V.22bis with MNP error correction.

Product: MT5600ZDX

Added - Compatibility with Alternating and Random Robbed-Bit-Signaling conditions.

Product: MT5600ZDX

Reduced the system startup time during power on reset to about 1.5 seconds.

Product: MT5600ZDX

Fixed - Analog Loop Back at 31200bps. It now reports CONNECT 31200 in AT&T2 test mode.

Product: MT5600ZDX

Fixed - An analog loop back test halt problem and error counter problem in AT&T8 test mode.

Product: MT5600ZDX

The MT5600ZDX / ZDXV are now able to detect a short DTR pulse down to 10ms.

Product: MT5600ZDX

Disabled Adaptive Dialing. Adaptive dialing works like this: the first number is tone dialed; then, if there is a dial tone present for 2 seconds, the modem switches from tone to pulse dialing.

Product: MT5600ZDX

Voice transmit and receive

Product: MT5600ZDXV

I downloaded the driver 56zdx.exe from your Web site and did the unzip. Now, I have a bunch of .inf files and am trying to install them, but when I click on the .inf files, nothing happens. How do I install the .inf stuff to load the driver

Product: MT5600ZDX

How do I disable the fax functionality on this modem

Product: MT5600ZDX

I see that this modem detects DTMF digits upon answering. How does it report the digits it captures

Product: MT5600ZDXV

Fixed - The line current sensing was not working when the ring polarity is reversed.

Products: MT5600ZDX, MT5600ZDXV

Fixed - With &D0, &D1, &D2, or &D3 set the modem will dial-out with or without the DTR signal (Data Terminal Ready Control.. The modem should only be allowed to dial-out without DTR with &D0 set.

Products: MT5600ZDX, MT5600ZDXV

How can I send DTMF tones generated by the software to a remote location.

Product: MT5600ZDXV

The escape to command mode sequence now works for the 7, even, 1 character format.

Product: MT5600ZDX

Added - Support for Caller ID.

Product: MT3334ZDX

I set my modem to answer after 8 rings, but the modem times out and won't connect.

Products: MT1932ZDX, MT56128ZLX, MT56128ZLX-NT, MT56128ZLX-ST, MT5634ZLX, MT5634ZLX-E, MT5634ZLX-FE, MT1432BA, MT1432BC, MT1432BL, MT1432BLR, MT1432LT, MT1432MU, MT1432PCS, MT1432PCS2, MT1432PCS3, MT1432PCSI, MT1432ZDX, MT1932BL, MT1932PCS, MT1932ZDX, MT1932ZPX, MT1932ZPX2, MT212xx, MT224xx, MT2834BA, MT2834BC, MT2834BL, MT2834BLR, MT2834BR, MT2834LT, MT2834LTI, MT2834PCS, MT2834PCS2, MT2834ZDXb, MT2834ZDXb-U, MT2834ZPX, MT3334LT, MT3334SMI, MT3334ZDX, MT3400SMI, MT3400ZLX, MT3410ZLX, MT5600BA, MT5600BA-V92, MT5600BL, MT5600DSVD, MT5600DSVD2, MT5600SMI, MT5600ZDX, MT5600ZDXV, MT5634MU, MT5634SMI, MT5634SMI-DK, MT5634SMI-IP, MT5634SMI-P, MT5634ZBA, MT5634ZBA-DID, MT5634ZBA-USB, MT5634ZBA-USB-V92, MT5634ZBA-V92, MT5634ZPX, MT5634ZPX-PCI, MT5634ZPX-PCI-V92, MT5656ZDX, MT5656ZDXV, MT932xx, SC144H0, SC144H1, SC144H1-L, SC336H0, SC336H1, SC336H1-L, SC56H0, SC56H1, SC56H1-L, SF144D/SPH0D5, SF144D/SPH1D5, SF224ATF/H0D5, SF224ATF/H1D5, SF336D/SPH0D5, SF336D/SPH1D5, SF336D/SPH1DC, SF56D/SPH0D5, SF56D/SPH1D5, Socke

I can't set the serial port rate to 300bps.

Product: MT5600ZDX

Fixed - Error Correction Mode select commands (\Nn) will no longer overwrite the &Cn parameters.

Product: MT5600ZDX

Command added to reset the modem on loss of carrier.

Product: MT5600ZDX

Quick Connect feature added.

Product: MT5600ZDX

Character (key) Abort command added.

Products: MT5600ZDX, MT5600ZDXV

Does the MultiModemZDX support MNP10 error correction

Products: MT5600ZDX, MT5600ZDXV

I need to adjust the gain for voice messages that I play and record. The messages are barely audible to a caller over the phone, how can I set these levels

Product: MT5600ZDXV

I can not get this modem setup correctly on a Cisco router.

Product: MT5656ZDX

Using the Classic Phonetools Software that comes with MT5600ZDX, is it possible to create a seperate mailbox for different employees in the company for received faxes

Product: MT5600ZDX

What is the shell of the DSUB25 serial connector on the MT2834ZDXb electrically connected to Is the signal reference (Pin 7) of the serial port common to the logical ground plane of the modem Is pin 7 isolated from the wall power supply

Product: MT2834ZDXb

Does the MT2834BA and the MT2834ZDXb use the same command set and act the same

Products: MT2834BA, MT2834ZDXb

What is the command used to enable / disable DTMF tone detection

Products: MT5600ZDXV, MT5600ZDX

The manual says that the Analog to Digital barrier on the drawing is really a safety isolation barrier between TNV and SELV. What does this mean

Products: MT3400SMI, MT5634MSV, MT5634ZBA, MT5634ZBA-DID, MT5634ZBA-V92, MT5634ZPX, MT5634ZPX-PCI, MT5634ZPX-PCI-V92, MT2834BA, MT2834BC, MT2834BL, MT2834BLR, MT2834BR, MT2834LTI, MT2834ZDXb, MT2834ZDXb-U, MT2834ZPX, MT3334SMI, MT5634SMI, MT5634SMI-P, MT5600SMI

Do the MT5600xxx modems support 11 bits (1 start, 8 data, 1 parity and 1 stop bit).

Products: MT5600BL, MT5656ZDX, MT5600ZDXV, MT5600ZDX, MT5656ZDXV

I have been working with a script for controlling a MT3334ZDX. During the execution of the script the modem sends numeric result codes such as 9LC, what does this mean

Product: MT3334ZDX

How to change modem Transmit Level.

Products: MT5600ZDX, MT5600ZDXV, MT5656ZDX, MT5656ZDXV, MT5600DSVD, MT5600DSVD2

We want to connect to the modem using the Bell 212A standard (1200bps), but the B1 command doesn't work. Does the MT1932ZDXI support the Bell 212A standard

Product: MT1932ZDX

I have two 1932zdx modems that have 1.15 firmware. I use a VsiFax software solution for faxing and their Tech Support recommends that I upgrade to the 1.16 firmware for these models. Can you send me the necessary chips

Product: MT1932ZDX

Is the MultiModemZDX a Class 1 or Class 2 fax modem

Product: MT1932ZDX

How do I perform an analog loopback test

Product: MT1932ZDX

Does this modem support synchronous data

Products: MT5634ZBA, MT5656ZDX, MT5656ZDXV

I setup my modem to receive a class 2 fax, but I don't recognize the incoming data using HyperTerminal.

Products: MT3334SMI, MT5634MSV, MT5634ZBA, MT5634ZBA-DID, MT5634ZBA-V92, MT5634ZPX, MT5634ZPX-PCI, MT5634ZPX-PCI-V92, MT2834BA, MT2834BC, MT2834BL, MT2834BLR, MT2834BR, MT2834LTI, MT2834ZDXb, MT2834ZDXb-U, MT2834ZPX, MT5634SMI, MT5634SMI-P

Where can I find the voice command documentation

Product: MT5600ZDXV

How do I configure the modem for voice and speakerphone operation

Product: MT5600ZDXV

Is it possible to alter the transmit level of the MT3334ZDX

Product: MT3334ZDX

I can't set the Abort Timer (S7 register) below 35.

Products: MT3334ZDX, MT5634MSV, MT5634ZBA, MT5634ZBA-DID, MT5634ZBA-V92, MT5634ZPX, MT5634ZPX-PCI, MT5634ZPX-PCI-V92, MT3334SMI, MT5634SMI, MT5634SMI-P

I can't connect to a 3 Com modem(U S Robotics) at 1200 or 2400bps, it drops to 300bps.

Products: MT3334ZDX, MT5634MSV, MT5634ZBA, MT5634ZBA-DID, MT5634ZBA-V92, MT5634ZPX, MT5634ZPX-PCI, MT5634ZPX-PCI-V92, MT3334SMI, MT5634SMI, MT5634SMI-P

How long is the warranty for the MultiModemZDX and MultiModemZPX series modems

Products: MT5600ZDX, MT2834ZDXb, MT2834ZDXb-U, MT2834ZPX, MT3334ZDX, MT5600ZDXV, MT5600ZDX, MT5634ZPX, MT5634ZPX-PCI, MT5634ZPX-PCI-V92, MT5656ZDX, MT5656ZDXV

Can I connect two phone lines to this modem

Products: MT5634ZPX-PCI-V92, MT5634MSV, MT5634ZBA, MT5634ZBA-V92, MT5634ZPX, MT5634ZPX-PCI, MT2834BA, MT2834BC, MT2834BL, MT2834BLR, MT2834BR, MT2834LTI, MT2834ZDXb, MT2834ZDXb-U, MT2834ZPX, MT3334ZDX, MT3334SMI, MT5634SMI, MT5634SMI-P

Can I use the MT2834BL on a 56K DDS line

Products: MT2834BL, MT5634MSV, MT5634ZBA, MT5634ZBA-V92, MT5634ZPX, MT5634ZPX-PCI, MT2834BA, MT2834BC, MT2834BL, MT2834BLR, MT2834BR, MT2834LTI, MT2834ZDXb, MT2834ZDXb-U, MT2834ZPX, MT3334ZDX, MT3334SMI, MT5634SMI, MT5634SMI-P

Does this modem support modem on hold (MOH)

Products: MT5634ZPX-PCI, MT5634MSV, MT5634ZBA, MT5634ZPX, MT2834BA, MT2834BC, MT2834BL, MT2834BLR, MT2834BR, MT2834LTI, MT2834ZDXb, MT2834ZDXb-U, MT2834ZPX, MT3334ZDX, MT3334SMI

I want to use the +VXT command(Translate Voice Data option), but I receive an 'ERROR' response.

Products: MT5634ZPX-PCI, MT5634MSV, MT5634ZBA, MT5634ZBA-DID, MT5634ZBA-V92, MT5634ZPX, MT5634ZPX-PCI-V92, MT2834BA, MT2834BC, MT2834BL, MT2834BLR, MT2834BR, MT2834LTI, MT2834ZDXb, MT2834ZDXb-U, MT2834ZPX, MT3334ZDX, MT3334SMI, MT5634SMI, MT5634SMI-P

Does this modem support MH, MRH and MMR compression

Products: MT5634ZPX-PCI, MT5634MSV, MT5634ZBA, MT5634ZPX, MT5634ZPX-PCI, MT2834BA, MT2834BC, MT2834BL, MT2834BLR, MT2834BR, MT2834LTI, MT2834ZDXb-U, MT2834ZDXb, MT2834ZPX, MT3334ZDX, MT3334SMI

Is there a command that indicates the fax classes that the modem supports

Products: MT5600ZDX, MT5634MSV, MT5634ZBA, MT5634ZBA-DID, MT5634ZBA-V92, MT5634ZPX, MT5634ZPX-PCI, MT5634ZPX-PCI-V92, MT2834BA, MT2834BC, MT2834BL, MT2834BLR, MT2834BR, MT2834LTI, MT2834ZDXb, MT2834ZDXb-U, MT2834ZPX, MT3334ZDX, MT3334SMI, MT5634SMI, MT5634SMI-P, MT5600BA, MT5600BL, MT5600DSVD, MT5600DSVD2, MT5600BA-V92, MT5656ZDXV, MT5656ZDX

Does this modem support V.26 Differential PSK

Products: MT2834BLR, MT5634MSV, MT5634ZBA, MT5634ZBA-DID, MT5634ZBA-V92, MT5634ZPX, MT5634ZPX-PCI, MT5634ZPX-PCI-V92, MT2834BA, MT2834BC, MT2834BL, MT2834BR, MT2834LTI, MT2834ZDXb, MT2834ZDXb-U, MT3334ZDX, MT3334SMI, MT5634SMI, MT5634SMI-P

Does this modem support DID (Direct inward dialing)

Products: MT2834BA, MT5634MSV, MT5634ZBA, MT5634ZBA-V92, MT5634ZPX, MT5634ZPX-PCI, MT5634ZPX-PCI-V92, MT2834BC, MT2834BL, MT2834BLR, MT2834BR, MT2834LTI, MT2834ZDXb, MT2834ZDXb-U, MT2834ZPX, MT3334ZDX, MT3334SMI, MT5634SMI, MT5634SMI-P

Does this modem automatically adjust to receive levels between 0 and 43 dBM

Products: MT5600BA, MT5634MSV, MT5634ZBA, MT5634ZBA-DID, MT5634ZBA-V92, MT5634ZPX, MT5634ZPX-PCI, MT5634ZPX-PCI-V92, MT2834BA, MT2834BC, MT2834BL, MT2834BLR, MT2834BR, MT2834LTI, MT2834ZDXb, MT2834ZDXb-U, MT2834ZPX, MT3334ZDX, MT3334SMI, MT5634SMI, MT5634SMI-P, MT5600BA-V92, MT5600BL, MT5600ZDX, MT5600ZDXV, MT5656ZDX, MT5656ZDXV, MT5600DSVD, MT5600DSVD2, MT1432PCS, MT1432PCS2, MT1432PCS3, MT1432PCSI, MT1932PCS, MT2834PCS, MT2834PCS2

Does this modem work on a digital line

Products: MT2834BL, MT5634MSV, MT5634ZBA, MT5634ZBA-V92, MT5634ZPX, MT5634ZPX-PCI, MT5634ZPX-PCI-V92, MT2834BA, MT2834BC, MT2834BLR, MT2834BR, MT2834LTI, MT2834ZDXb, MT2834ZDXb-U, MT2834ZPX, MT3334ZDX, MT3334SMI, MT5634SMI, MT5634SMI-P

Is there a way to turn off this modem remotely as a security measure

Products: MT5634ZBA, MT5634MSV, MT5634ZBA-DID, MT5634ZBA-V92, MT5634ZPX, MT5634ZPX-PCI, MT5634ZPX-PCI-V92, MT2834BA, MT2834BC, MT2834BL, MT2834BLR, MT2834BR, MT2834LTI, MT2834ZDXb, MT2834ZDXb-U, MT2834ZPX, MT3334ZDX, MT3334SMI, MT5634SMI, MT5634SMI-P

What is the command to set the serial speed to 9600

Products: MT2834ZDXb, MT5634MSV, MT5634ZBA, MT5634ZBA-DID, MT5634ZBA-V92, MT5634ZPX, MT5634ZPX-PCI, MT5634ZPX-PCI-V92, MT2834BA, MT2834BC, MT2834BL, MT2834BLR, MT2834BR, MT2834LTI, MT2834ZDXb-U, MT2834ZPX, MT3334ZDX, MT3334SMI, MT5634SMI, MT5634SMI-P

Will the modem or phone ring when the phone is plugged into the phone jack and a call comes into the modem

Products: MT5600ZDX, MT5634MSV, MT5634ZBA, MT5634ZBA-DID, MT5634ZBA-V92, MT5634ZPX, MT5634ZPX-PCI, MT5634ZPX-PCI-V92, MT2834BA, MT2834BC, MT2834BL, MT2834ZDXb, MT2834ZDXb-U, MT2834ZPX, MT3334ZDX, MT5600ZDXV

My modem will not connect with my ISP's modem.

Products: MT2834ZDXb, MT5634MSV, MT5634ZBA, MT5634ZBA-DID, MT5634ZBA-V92, MT5634ZPX, MT5634ZPX-PCI, MT5634ZPX-PCI-V92, MT2834BA, MT2834BC, MT2834BL, MT2834BLR, MT2834BR, MT2834LTI, MT2834ZDXb-U, MT2834ZPX, MT3334ZDX

What initialization string should I use when dialing into the Internet

Products: MT2834ZDXb, MT5634MSV, MT5634ZBA, MT5634ZBA-DID, MT5634ZBA-V92, MT5634ZPX, MT5634ZPX-PCI, MT5634ZPX-PCI-V92, MT2834BA, MT2834BC, MT2834BL, MT2834BLR, MT2834BR, MT2834LTI, MT2834ZPX, MT3334ZDX

What is the number of the MultiTech BBS The number in the manual does not answer.

Products: MT2834ZPX, MT5634MSV, MT5634ZBA, MT5634ZBA-DID, MT5634ZBA-V92, MT5634ZPX, MT5634ZPX-PCI, MT5634ZPX-PCI-V92, MT2834BA, MT2834BC, MT2834BL, MT2834BLR, MT2834BR, MT2834LTI, MT2834ZDXb, MT2834ZDXb-U, MT3334ZDX, MT3334SMI, MT5634SMI, MT5634SMI-P

My modem won't answer an incoming call, when a call comes in, the modem just beeps

Products: MT5600ZDXV, MT5634MSV, MT5634ZBA, MT5634ZBA-V92, MT2834BA, MT2834BL, MT2834BLR, MT2834BR, MT2834ZDXb, MT2834ZDXb-U, MT3334ZDX, MT5600BA, MT5600BL, MT5600BA-V92, MT5600ZDX, MT5656ZDX, MT5656ZDXV, MT5600DSVD2, MT5600DSVD, MT1432PCS, MT1432PCS2, MT1432PCS3, MT1432PCSI, MT1932PCS, MT2834PCS, MT2834PCS2

Does this modem support remote configuration

Products: MT2834ZDXb-U, MT5634MSV, MT5634ZBA, MT5634ZBA-DID, MT5634ZBA-V92, MT5634ZPX, MT5634ZPX-PCI, MT5634ZPX-PCI-V92, MT5634SMI, MT5634SMI-IP, MT3334ZDX, MT3334SMI

Does this modem support MNP10 error correction

Products: MT5634ZLX, MT5634MSV, MT5634ZBA, MT5634ZBA-DID, MT5634ZBA-V92, MT5634ZPX, MT5634ZPX-PCI, MT5634ZPX-PCI-V92, MT2834BA, MT2834BC, MT2834BL, MT2834BLR, MT2834BR, MT2834LTI, MT2834ZDXb, MT2834ZDXb-U, MT2834ZPX, MT3334ZDX, MT3334SMI, MT5634SMI, MT5634SMI-P, MT56128ZLX, MT56128ZLX-NT, MT56128ZLX-ST, MT5634ZLX, MT5634ZLX-E, MT5634ZLX-FE, MT1432BA, MT1432BC, MT1432BL, MT1432BLR, MT1432LT, MT1432MU, MT1432ZDX, MT1932BL, MT1932ZDX, MT1932ZPX, MT1932ZPX2, MT212xx, MT224xx, MT932xx, MT2834LT, MT3334LT, MT3400ZLX

Does this modem support Multi Drop (Multi Point) connections (Lines)

Products: MT2834MR, MT5600BL, MT1432BA, MT1432BC, MT1432BL, MT1432BLR, MT1432MR, MT1432MU, MT1432PCS, MT1432PCS2, MT1432PCS3, MT1432ZDX, MT1932BL, MT1932PCS, MT1932ZDX, MT212xx, MT224xx, MT2834BA, MT2834BL, MT2834BLR, MT2834BR, MT2834MR-PSTN, MT2834MR6, MT2834ZDXb, MT2834ZDXb-U, MT3334HD8, MT3334SMI, MT3334ZDX, MT3400SMI, MT5600BA, MT5600BA-V92, MT5600DSVD, MT5600DSVD2, MT5600SMI, MT5600ZDX, MT5600ZDXV, MT5634HD16, MT5634HD8, MT5634MSV, MT5634MU, MT5634SMI, MT5634SMI-DK, MT5634SMI-IP, MT5634SMI-P, MT5634ZBA, MT5634ZBA-DID, MT5634ZBA-USB, MT5634ZBA-USB-V92, MT5634ZBA-V92, MT932xx, SC144H0, SC144H1, SC144H1-L, SC336H0, SC336H1, SC336H1-L, SC56H0, SC56H1, SC56H1-L, SF144D/SPH0D5, SF144D/SPH1D5, SF224ATF/H0D5, SF224ATF/H1D5, SF336D/SPH0D5, SF336D/SPH1D5, SF336D/SPH1DC, SF56D/SPH0D5, SF56D/SPH1D5, SocketModem EOL

Can the speaker volume be lowered or turned off on this modem

Products: MT5600ZDX, MT1432BA, MT1432BC, MT1432BL, MT1432MU, MT1432PCS, MT1432PCS2, MT1432PCS3, MT1432PCSI, MT1432ZDX, MT1932BL, MT1932PCS, MT1932ZDX, MT1932ZPX, MT1932ZPX2, MT5600ZDXV, MT5634ZBA-V92, MT5634ZBA-USB-V92, MT5656ZDX, MT212xx, MT224xx, MT2834BA, MT2834BC, MT2834BL, MT2834PCS, MT2834PCS2, MT2834ZPX, MT3334ZDX, MT5600BA, MT5600BL, MT5600DSVD, MT5600DSVD2, MT5634MSV, MT5634MU, MT5634ZBA, MT5634ZBA-USB, MT5634ZPX, MT5634ZPX-PCI, MT932xx, MT2834ZDXb, MT5634ZBA-DID, MT2834ZDXb-U, MT5634ZPX-PCI-V92, MT5600BA-V92, MT5656ZDXV, MT2834ZPW, MT5634ZPW

Which of your external modems support distinctive ring

Products: MT5600ZDX, MT5600BA, MT5600BA-V92, MT5600BL, MT5600DSVD, MT5600DSVD2, MT5600ZDX, MT5600ZDXV, MT5634MSV, MT5634MU, MT5634ZBA, MT5634ZBA-DID, MT5634ZBA-USB, MT5634ZBA-USB-V92, MT5634ZBA-V92, MT5656ZDX, MT5656ZDXV

Does this modem support Error Correcting Mode (ECM) when faxing

Products: MT5600ZDX, MT5634ZBA-V92

Does this modem support call back security

Products: MT5634ZBA-USB, MT2834ZDXb, MT5634MU, MT5634ZLX, MT5634ZLX-E, MT5634ZLX-FE, MT2834ZDXb-U

What are the functional differences between the the MT2834ZDX and MT2834ZDXb modems

Product: MT2834ZDXb

I see that this modem detects DTMF digits upon answering, how does it report the digits it captures

Product: MT2834ZDXb

Gets garbage lines when receiving faxes in Winfax software, but sends ok.

Product: MT2834ZDXb

I'm developing a telephone call recorder application, does this modem detect when the remote telephone goes on-hook and off-hook

Product: MT5656ZDXV

Does this modem detect when the attached telephone goes on-hook and off-hook

Product: MT5656ZDXV

How do I turn the speakerphone volume up on this modem

Product: MT5656ZDXV

Does this modem disconnect the phone jack so nothing can disturb the modem line during important data transfers

Product: MT5656ZDX

What is the command used to set the compression bit rate for voice

Product: MT5600ZDXV

Is the @ (wait for silence command) supported by your modem

Product: MT2834ZDXb

The modem is installed on Win 2000 SBS with MS Fax running, but when a fax call comes in, it will not work.

Products: MT2834ZDXb, MT1932ZDX

We have a MultiModem MT2834ZDX which we use for detecting DTMF tones from a caller. Is it possible to generate a tone from the MultiModem to indicate to the caller that we are ready to receive DTMF tones

Product: MT2834ZDXb

I have just upgraded the OS to WinXP Pro. I dial into my work RAS server and it's set to DIAL-BACK. My PC thinks that the remote connection (Work RAS) has dropped the connection when I am waiting for the return incoming call.

Product: MT2834ZDXb

Does this modem have a watchdog feature built in

Product: MT2834ZDXb

What 300 bps standard does this modem support, the Bell 103 or V.21 standard

Product: MT2834ZDXb

The manual states that the S30 register (inactivity timer) is in units of 10ms, How can I set it to 15 minutes

Product: MT5600ZDX

How can I change the country selection, the Global Wizard doesn't recognize this modem

Product: MT1932ZDX

Does the MT1932ZDX support 11 bit (word length) operation

Product: MT1932ZDX

My modem connection keeps disconnecting from my ISP, what should I do

Products: MT2834ZDXb, MT2834BA, MT2834BL, MT5600BA, MT5600BL, MT5600SMI, MT5600ZDX, MT5600ZDXV, MT3400SMI

We are calling the Multi-Tech modem with an old 300 bps modem and it will not connect at 300 bps.

Product: MT5600ZDX

Does this modem support call back security

Product: MT5600ZDX

Will this modem support a dedicated (leased line) connection to a remote computer with a point-to-point link through the PTT

Products: MT5600ZDX, MT5600ZDXV, MT5656ZDX, MT5600DSVD, MT5600DSVD2, MT5656ZDXV

Is there a way to use these modems on a leased line instead of a dial up connection

Products: MT5600DSVD, MT5600ZDXV, MT5600ZDX, MT5656ZDX, MT5656ZDXV, MT5600DSVD2

How do I setup this modem to autodial another modem upon power up (turn on)

Products: MT5600DSVD, MT5600ZDX, MT5656ZDXV, MT5600DSVD2, MT5656ZDX, MT5600ZDXV

How do I store a telephone number in the modem

Products: MT5600ZDX, MT5600BA, MT5600BL, MT5600BA-V92, MT5656ZDXV, MT5656ZDX, MT5600DSVD, MT5600DSVD2

Does this modem support MNP_5 and ITU-T V.42 ( LAP_M) protocols

Products: MT5600BA, MT5600BL, MT5600ZDX, MT5600ZDXV, MT5600DSVD, MT5600DSVD2, MT1432PCS, MT1432PCS2, MT1432PCS3, MT1432PCSI, MT1932PCS, MT2834PCS, MT2834PCS2

Does this modem have Automatic Line Speed Selection

Products: MT5600BA, MT5600BA-V92, MT5600BL, MT5600ZDXV, MT5600ZDX, MT5656ZDXV, MT5656ZDX, MT5600DSVD, MT5600DSVD2, MT1432PCS, MT1432PCS2, MT1432PCS3, MT1432PCSI, MT1932PCS, MT2834PCS, MT2834PCS2

is this modem TAPI compliant

Products: MT5600ZDX, MT5600ZDXV, MT5656ZDX, MT5656ZDXV, MT5600DSVD, MT5600DSVD2

I can't write new settings to the S22-register.

Products: MT5600ZDX, MT5600ZDXV

I want a Multi-Tech serial modem that is easy to install for my Mac. Which modem would you recommend

Products: MT5600ZDX, MT5600BA, MT5600BL, MT5600BA-V92, MT5656ZDXV, MT5600DSVD, MT5600DSVD2, MT5600ZDXV, MT5656ZDX

Can I increase the speaker volume

Products: MT5600ZDXV, MT5656ZDX, MT5656ZDXV, MT5600ZDX

Is there an upgrade for MultiExpress

Product: MT2834ZDXb

Can the modem be setup to dial once carrier drops.

Product: MT2834ZDXb

How do I disable the inactivity timer

Products: MT2834BL, MT2834BA, MT2834BC, MT2834BLR, MT2834BR, MT2834LTI, MT2834ZDXb, MT2834ZPX

Commands that PhoneTools sends when playing a message to the speaker jack.

Product: MT5600ZDXV

I receive an error response to AT+VCID=1, does this modem support caller id

Product: MT3334ZDX

Problem detecting a square wave ring signal.

Products: MT1932ZDX, MT2834BA, MT2834BL, MT2834BLR, MT2834BR

Does this modem support V.33

Products: MT5600BL, MT5600BA, MT5600BA-V92, MT5600ZDXV, MT5600ZDX, MT5656ZDXV, MT5656ZDX, MT5600DSVD, MT5600DSVD2

What is the phone line impedance for this modem

Products: MT5600ZDX, MT5600BA, MT5600BL, MT5600DSVD, MT5600DSVD2, MT5600BA-V92, MT5656ZDXV, MT1432PCS, MT1432PCS2, MT1432PCS3, MT1432PCSI, MT1932PCS, MT2834PCS, MT2834PCS2

What is the UL certification file number for this modem

Products: MT2834ZDXb, MT2834BA, MT2834BL, MT2834BR, MT2834BLR, MT2834MR6, MT3334SMI, MT3400SMI, MT5600BA, MT5600BA-V92, MT5600BL, MT5600SMI, MT5600ZDX, MT5634MU, MT5634SMI, MT5634ZBA, MT5634ZPX-PCI, MT5656ZDX, MT5634ZBA-USB

How do I stop the modem from adjusting its baud rate from the desired rate I typically want to connect at a baud rate of either 1200, 4800, 9600 and I don't want the modem to fallback or fallforward.

Product: MT2834ZDXb

In Mac OS 9.1 or 9.2, uninstall ARA 4.x, install ARA 3.5 to avoid dial-up bug

Products: MTA128ST, MT5634MU, MT5634ZBA-USB, MT5634ZBA-USB-V92, MTA128NT, MTA128ST-USB, RASExpress, MT5600ZDX, MT2834BA, MT3334ZDX, MT5600BA, MT5600BA-V92, MT5634ZBA

Does this modem support Auto Sync (&Q4 command)

Product: MT5600ZDX

Windows 95/98 does not automatically detect my internal/external modem on the initial installation, what could be wrong

Product: MT2834ZDXb

Do I need special drivers to use my modem with Windows 95 / 98

Product: MT2834ZDXb

How do I set up this modem for even parity

Product: MT2834ZDXb

Does this modem support 11 bit operation

Product: MT2834ZDXb

Does this modem support 11 bit operation

Product: MT3334ZDX