Resolutions

What is the speaker and microphone impedance

Products: MT5634ZPX, MT5634ZBA-V-V92

Will the MultiModem ZBA / ZBA-USB work under Windows Server 2008 x64

Products: MT9234ZBA-USB, MT9234ZBA, MT9234ZBA-V

Do you have a SCO Unix driver for the MT9234ZBA-USB

Product: MT9234ZBA-USB

Does MT9234ZBA-USB support ACM for Linux The earlier model (MT5634ZBA-USB) did supported ACM, but it seems that the new one doesn't.

Products: MT9234ZBA-USB, MT5634ZBA-USB, MT5634ZBA-USB-V92

How can I disable callback security

Products: MT5634ZBA, MT5634ZBA-DID, MT5634ZBA-USB, MT5634ZBA-USB-V92, MT5634ZBA-V-V92, MT5634ZBA-V92, MT5634IND

Does this modem support ACM as defined in the USB CDC (1.1) specification

Product: MT5634ZBA-USB

voice playback through modem speaker jack- FaxTalk Voice/Fax software

Product: MT5634ZBA-V-V92

I'm trying to do a remote loop back and I keep getting and error on AT&T6, what is the procedure

Products: MT5634ZBA, MT5634ZBA, MT5634ZBA-DID, MT5634ZBA-V92, MT5634ZPX, MT5634ZPX-PCI, MT5634ZPX-PCI-V92, MT5656ZDX, MT5656ZDXV

Does this modem support 4 wire leased line operation

Products: MT5634ZBA, MT5634IND

I downloaded the Mac modem scripts, but now what do I do with them

Products: MT5634ZBA-USB, MT5634ZBA-USB-V92, MT5634MU

Does the MT5656ZDX support Super G3 Fax

Products: MT5656ZDX, MT5656ZDXV, MT5600ZDX, MT5600ZDXV, MT5634ZBA-V-V92, MT5634ZBA-V92, MT5634ZBA-USB-V92, MT9234ZBA, MT9234ZBA-V, MT9234ZBA-USB

Is there a way to make this model work on VISTA

Products: MT5634ZBA-USB, MT5634ZBA-USB-V92

FlashWizard does not see HEX file

Products: FlashWizard, MT2834BA, MT2834BL, MT2834BLR, MT2834BR, MT2834ZDXb, MT2834ZPX, MT3334SMI, MT3400SMI, MT5600BA, MT5600BA-V92, MT5600BL, MT5600SMI, MT5600ZDX, MT5600ZDXV, MT5634MU, MT5634SMI, MT5634SMI-P, MT5634ZBA, MT5634ZBA-USB, MT5634ZBA-USB-V92, MT5634ZBA-V92, MT5634ZPX-PCI, MT5634ZPX-PCI-V92, MT5656ZDX, MT5656ZDXV

Where can I get a replacement power supply transformer for my MultiModem

Products: MT2834BA, MT1432BA, MT1432BL, MT1932BL, MT1932ZDX, MT202TD, MT2834BL, MT2834PCS, MT2834PCS2, MT2834ZDXb, MT2834ZDXb-U, MT3334ZDX, MT5600BA, MT5600BA-V92, MT5600BL, MT5600DSVD, MT5600DSVD2, MT5600ZDX, MT5600ZDXV, MT5634IND, MT5634MSV, MT5634MU, MT5634ZBA, MT5634ZBA-DID, MT5634ZBA-USB-V92, MT5634ZBA-USB, MT5634ZBA-V-V92, MT5634ZBA-V92, MT5656ZDX, MT5656ZDXV, MT932xx, MTA128NT, MTA128ST, MTA128ST-USB

What are the ratings / specifications of the power supply

Products: MT2834ZDXb, MT5634ZBA, MT5600ZDX

Problems sending faxes using Windows Vista Ultimate and Business editions only. Partial pages, or multiple repeated pages are sent.

Products: MT5634ZBA-V92, MT5634ZBA, MT5600BA, MT5600BA-V92, MT5600BL, MT5600BR-V92, MT5600ZDX, MT5600ZDXV, MT5634IND, MT5634MSV, MT5634MU, MT5634ZBA-USB, MT5634ZBA-USB-V92, MT5634ZBA-V-V92, MT5634ZPX, MT5634ZPX-PCI, MT5634ZPX-PCI-U, MT5634ZPX-PCI-V92, MT5656ZDX, MT5656ZDXV, MT5600DSVD, MT5600DSVD2

Fixed - A problem when setting AT+VCID=2 on a normal (non CID) line. Now the modem does not display unformatted garbage anymore.

Product: MT9234ZBA

Fixed - An issue where ATZ quickly followed with AT would cause garbage commands. Also fixed an issue where incoming the incoming ring would be garbage,

Product: MT9234ZBA

What chipset is used in the 56k External USB Modem (MT9234ZBA-USB)

Product: MT9234ZBA-USB

We have a Multitech MT5634ZBA-USB-V92, and I want to know if this modem supports DTMF/DID for incoming fax routing

Products: MT5634ZBA-USB-V92, MT5634ZBA-USB, MT5634ZBA-DID

Can the MT5634ZBA-USB be installed on Solaris 9

Products: MT5634ZBA-USB-V92, MT5634ZBA-USB

Does this modem support Reverse mode

Products: MT5634ZBA, MT5600BA, MT5600BA-V92, MT5600BL, MT5600BR-V92, MT5600DSVD, MT5600DSVD2, MT5600ZDX, MT5600ZDXV, MT5634IND, MT5634MSV, MT5634MU, MT5634ZBA-DID, MT5634ZBA-USB, MT5634ZBA-USB-V92, MT5634ZBA-V-V92, MT5634ZBA-V92, MT5634ZPX, MT5634ZPX-PCI, MT5634ZPX-PCI-U, MT5634ZPX-PCI-V92, MT5656ZDX, MT5656ZDXV

Does the #RM command reset the setup password

Product: MT5634ZBA

What are the differences between MT5634ZBA-V92-NAM Global and Non Global modems

Product: MT5634ZBA-V92

Changed - Made sending and receiving faxes more robust.

Products: MT5634ZBA-DID, FF110

Fixed - A stay off hook forever problem when receiving faxes.

Products: MT5634ZBA-DID, FF110

Fixed - When setting for +fclass=2.0 there were problems in going back to data mode whether by ATZ, AT&F or +fclass=0 commands. Both answer and originate handshakes were failing.

Products: MT5634ZBA-DID, FF110

Fixed - A problem where we couldn't receive the second document from a fax machine that we were polling.

Products: MT5634ZBA-DID, FF110

Fixed - Fax receive problems if the serial baud rate is <= 19200

Products: MT5634ZBA-DID, FF110

Is it possible for the modem to receive multiple faxes simultaneously

Products: MT5634ZBA-V92, MT2834BA, MT2834BC, MT2834BL, MT2834BLR, MT2834BR, MT2834PCS, MT2834PCS2, MT2834ZDXb, MT2834ZDXb-U, MT2834ZPX, MT3334ZDX, MT5600BA, MT5600BA-V92, MT5600BL, MT5600BR-V92, MT5600DSVD, MT5600DSVD2, MT5600SMI, MT5600ZDX, MT5600ZDXV, MT5634IND, MT5634MSV, MT5634MU, MT5634SMI, MT5634ZBA, MT5634ZBA-DID, MT5634ZBA-USB, MT5634ZBA-USB-V92, MT5634ZBA-V-V92, MT5634ZPX, MT5634ZPX-PCI, MT5634ZPX-PCI-U, MT5634ZPX-PCI-V92, MT5656ZDX, MT5656ZDXV

How do I enable Caller ID on this modem

Products: MT5634ZPX-PCI, MT5634ZPX, MT5634ZPX-PCI-U, MT5634ZPX-PCI-V92, MT5634ZBA, MT5634ZBA-DID, MT5634ZBA-USB, MT5634ZBA-USB-V92, MT5634ZBA-V-V92, MT5634ZBA-V92, MT5634IND, ISI5634UPCI-4, ISI5634UPCI-8

Will the MT5634ZBA modem fit in your modem cage ZDX Rack

Products: MT5634ZBA, MT5634ZBA-V92, MT5634ZBA-V-V92

How do I change the setup password

Products: MT5634ZBA, MT5634MSV, MT5634ZBA-DID, MT5634ZBA-V92, MT5634ZPX, MT5634ZPX-PCI, MT5634ZPX-PCI-V92, MT3334SMI, MT5634SMI, MT5634SMI-P

What is the escape sequence for remote configuration

Products: MT5634ZBA, MT5634MSV, MT5634ZBA-DID, MT5634ZBA-V92, MT5634ZPX, MT5634ZPX-PCI, MT5634ZPX-PCI-V92, MT3334SMI, MT5634SMI, MT5634SMI-P

Does this modem support Error Correcting Mode (ECM) when faxing

Products: MT5634ZBA-V92, ISI5634PCI-4, MT5634ZPX-PCI-V92, MT5634SMI-92, ISI5634PCI-8, MT5634ZBA-USB-V92

Does this modem support MH, MRH and MMR compression

Products: MT5634ZPX-PCI-V92, MT5634ZBA-DID, MT5634ZBA-V92

Modem responds to the ATI command with FLASH Vs 4.3.

Products: MT5634ZPX-PCI, MT5634MSV, MT5634ZBA, MT5634ZBA-DID, MT5634ZPX-PCI-V92, MT5634ZPX, MT3334SMI, MT5634SMI, MT5634SMI-P

When you send a fax with WinFax PRO 10.xx, you may see this error message 'Fax/Modem Alert: error setting up your communication port state'.

Products: MT5634ZBA, MT5634ZBA-USB, MT5634ZBA-USB-V92, MT5634ZBA-V-V92, MT5634ZBA-V92, MT5634IND, MT5634MSV, MT5634MU, MT5634SMI, MT5634SMI-34, MT5634SMI-92, MT5600BA, MT5600BA-V92, MT5600BL, MT5600BR-V92, MT5600SMI, MT5600SMI-32, MT5600SMI-34, MT5600SMI-92, MT5600ZDX, MT5600ZDXV

MT2834xx / MT5634xx Command Cross Reference Guide

Products: MT2834BA, MT2834BC, MT2834BL, MT2834BLR, MT2834BR, MT2834ZDXb, MT2834ZDXb-U, MT2834ZPX, MT5634IND, MT5634MSV, MT5634MU, MT5634ZBA, MT5634ZBA-DID, MT5634ZBA-USB, MT5634ZBA-USB-V92, MT5634ZBA-V-V92, MT5634ZBA-V92, MT5634ZPX, MT5634ZPX-PCI, MT5634ZPX-PCI-U, MT5634ZPX-PCI-V92

Fixed a V.44 negotiation problem. The modem may exhibit several symptoms: - Connect and pass garbled data - Connect briefly and then disconnect - Not make a connection

Products: MT5634ZBA-USB-V92, MT5634ZPX-PCI-V92, MT5634ZBA-DID

Remote configuration does not work with MNP5 connections.

Products: MT5634ZBA-USB, blue widget

+FHNG:43 error when sending a fax.

Product: MT5634ZBA-USB

When a multi-page fax is sent with different resolutions on each page, the modem will send the first page, then receive an error message and disconnect.

Product: MT5634ZBA-USB

Full duplex throughput improvements.

Product: MT5634ZBA-USB

V.90 connection improvements on some lines that would formerly fall back to V.34.

Product: MT5634ZBA-USB

After a V.23 connection, the first V.90 connection was non error correction, but the following V.90 connections were error correcting.

Product: MT5634ZBA-USB

Modem answers a call even if DTR is not present.

Product: MT5634ZBA-USB

Can I use a MT5634ZBA-USB-MAC Modem on a PC with a Windows 2000 / XP OS and a USB port

Product: MT5634ZBA-USB

I receive an error message when sending the command AT$FC=1, Does this modem support the quick connect feature

Product: MT5634ZBA-USB

Do you have a seperate model for the Mac Does Multi-Tech provide the modem driver, script or system extension for my Mac OS

Products: MT5634ZBA-USB, MT5634ZBA-USB-V92

The modem installs properly in Windows, but when I reboot my computer the modem is not present or detected.

Products: MT5634ZBA-USB-V92, MT5634ZBA-USB

Trouble installing the modem in a Windows 2000 or Windows XP system.

Product: MT5634ZBA-USB

Does Multi-Tech provide the system extensions (drivers) for my Mac

Products: MT5634ZBA-USB, MT5634ZBA-USB-V92, MT5634MU

Does Multi-Tech provide the modem script for my Mac

Products: MT5634ZBA-USB, MT5634ZBA-USB-V92, MT5634MU

Is it possible to have multiple V.92 AT commands contained in one string (ex. AT+MS=V34,1+DCS1,1) These commands work separately, but I always get an ERROR result code if the're combined as one string

Products: MT5634ZBA-V92, MT5634SMI-P-92

Changed - In V.34 fax mode, if the signal is lost, we now disconnect with +FHS: 55

Product: MT5634ZBA-DID

Fixed - Some +FHS: 52/54 fax errors.

Product: MT5634ZBA-DID

I am interested in using the Caller ID functionality of your MT5634ZBA modems. Can the modem be programmed with a list of phone numbers whereby if an incoming call is not from one of these numbers the modem either will not answer or not connect

Product: MT5634ZBA

USB modems and Mac support.

Products: MT5634ZBA-USB, MT5634ZBA-USB-V92, MT5634MU

Does this modem support Caller ID

Products: MT5634ZPX-PCI, SC56H1, MT5634ZBA-DID, MT5634ZPX, MT5634ZPX-PCI-V92, MT5634ZBA-V92

Do you have a list of country codes for this global modem

Products: MT5634SMI, MT5634IND, MT5600SMI, MT5600BA-V92, MT5634ZBA-USB-V92, MT5634ZBA-V-V92, MT5634ZBA-V92, MT5634ZPX-PCI, MT5634ZPX-PCI-U, MT5634ZPX-PCI-V92, MT5656SMI, MT2456SMI-22, MT2456SMI-IP-22, MT2456SMI-IP-32, MT2456SMI-IP-34, MT2456SMI-IP-92

How can I find out if my modem is RoHS compliant

Products: MT5600BA-V92, MT5634ZBA-USB-V92, MT5634ZBA-V-V92, MT5634ZBA-V92, MT5656ZDX, MT5656ZDXV

Are there drivers available for the MT5634ZBA modem models for Windows Server 2003 x64

Products: MT5634ZBA-USB-V92, MT5634ZBA, MT5634ZBA-USB, MT5634ZBA-V-V92, MT5634ZBA-V92

Are Mac drivers shipped with the MT5634ZBA_USB

Products: MT5634ZBA-USB, MT5634ZBA-USB-V92, MT5634MU

Do you have drivers for Windows CE

Products: MT5634ZBA-USB, MT5634ZBA-USB-V92, MT5634ZBA-DID

The modem MT5634ZBA-USB-V92 is connected to an IBM server X306 and the modem is not detected on power up. The modems will be detected if it is unplug and plug back in to the usb port of the system.

Product: MT5634ZBA-USB-V92

How much current does this USB modem draw

Products: MT5634ZBA-USB-V92, MT5634ZBA-USB, MT5634MU

Can you give me instructions to disable V.92

Product: MT5634ZBA-V92

Can we extend the amount of time that the comma will give us in the pause Specifically we need three seconds.

Products: MT2834BL, MT2834BA, MT2834BC, MT2834BLR, MT2834BR, MT5600ZDX, MT5600ZDXV, MT5634ZBA, MT5634ZBA-DID, MT5634ZBA-USB, MT5634ZBA-USB-V92, MT5634ZBA-V-V92, MT5634ZBA-V92

An ATZ command to the modem when in data mode or when there is an incoming ring would put out 2 'OK' responses.

Product: MT5634ZBA-DID

Windows 2000 states 'Cannot find security catalog file' and will not install modem

Products: MT5634ZBA, MT5600BA, MT5600BA-V92, MT5600BL, MT5600DSVD, MT5600DSVD2, MT5600ZDX, MT5600ZDXV, MT5634MSV, MT5634MU, MT5634ZBA-DID, MT5634ZBA-USB, MT5634ZBA-USB-V92, MT5634ZBA-V92, MT5634ZLX, MT5634ZLX-E, MT5634ZLX-FE, MT5634ZPX, MT5634ZPX-PCI, MT5634ZPX-PCI-V92, MT5656ZDX, MT5656ZDXV, MT5634ZPW, MT5634HD16, MT5634HD8, MT5634SMI, MT5634SMI-92, MT5634SMI-DK, MT5634SMI-IP, MT5634SMI-P, MT5634SMI-P-92

When I open up the America On Line dialer and try to connect, AOL responds with a message 'AOL cannot initialize the modem' and the modem will not dial out.

Product: MT5634ZBA-USB

Win2k claims it has a driver for this modem, it 'installs', but has a driver problem, and can't open the device.

Products: MT5634ZBA-USB, MT5634ZBA-USB-V92, MT5634MU

How do I install my USB modem system extension (driver) in Mac OS 8.5.1 or Mac OS 8.6

Products: MT5634ZBA-USB, MT5634MU, MT5634ZBA-USB-V92

I installed the Mac modem script(s), but where do I select the one to use in Mac OS X

Products: MT5634ZBA-USB, MT5634MU, MT5634ZBA-USB-V92

I installed the Mac modem script(s), but where do I select the one to use in Classic Mac OS

Products: MT5634ZBA-USB, MT5634ZBA-USB-V92, MT5634MU

Do the SocketModem series modems support receiver sensitivity adjustments through S-register commands

Products: MT5634SMI-92, MT5634SMI-P-92, MT5634ZPX-PCI-V92, MT5634ZBA-V92, MT5634ZBA-V-V92

Dialer in Windows XP

Products: MT5634ZPX-PCI-V92, MT5634ZBA-V-V92

Fixed a modem lock-up problem when connecting with certain fax machines. We now limit the length of the +FNF:frame. If the frame is longer than 0x40 bytes, the modem locks up after +FCO.

Products: MT5634ZBA-DID, MT5634ZBA-V92

Is there a command or firmware to allow the 5634ZBA-V92 to run with 11 bits in command mode as well as data (on-line) mode

Products: MT5634ZBA-V92, MT5634ZBA-V-V92

Fixed - If a V.42bis connection was negotiated and the first data sent from the originating modem and the data pattern was 0x00 - 0xff, the originating modem would lock up. Usually the Watch Dog timer would expire.

Products: MT5634ZPX-PCI-V92, MT5634ZBA-V92

I set my modem to answer after 8 rings, but the modem times out and won't connect.

Products: MT1932ZDX, MT56128ZLX, MT56128ZLX-NT, MT56128ZLX-ST, MT5634ZLX, MT5634ZLX-E, MT5634ZLX-FE, MT1432BA, MT1432BC, MT1432BL, MT1432BLR, MT1432LT, MT1432MU, MT1432PCS, MT1432PCS2, MT1432PCS3, MT1432PCSI, MT1432ZDX, MT1932BL, MT1932PCS, MT1932ZDX, MT1932ZPX, MT1932ZPX2, MT212xx, MT224xx, MT2834BA, MT2834BC, MT2834BL, MT2834BLR, MT2834BR, MT2834LT, MT2834LTI, MT2834PCS, MT2834PCS2, MT2834ZDXb, MT2834ZDXb-U, MT2834ZPX, MT3334LT, MT3334SMI, MT3334ZDX, MT3400SMI, MT3400ZLX, MT3410ZLX, MT5600BA, MT5600BA-V92, MT5600BL, MT5600DSVD, MT5600DSVD2, MT5600SMI, MT5600ZDX, MT5600ZDXV, MT5634MU, MT5634SMI, MT5634SMI-DK, MT5634SMI-IP, MT5634SMI-P, MT5634ZBA, MT5634ZBA-DID, MT5634ZBA-USB, MT5634ZBA-USB-V92, MT5634ZBA-V92, MT5634ZPX, MT5634ZPX-PCI, MT5634ZPX-PCI-V92, MT5656ZDX, MT5656ZDXV, MT932xx, SC144H0, SC144H1, SC144H1-L, SC336H0, SC336H1, SC336H1-L, SC56H0, SC56H1, SC56H1-L, SF144D/SPH0D5, SF144D/SPH1D5, SF224ATF/H0D5, SF224ATF/H1D5, SF336D/SPH0D5, SF336D/SPH1D5, SF336D/SPH1DC, SF56D/SPH0D5, SF56D/SPH1D5, Socke

Fixed - An issue where an RTP resulted in +FHS:72 instead of +FHS:0. Also fixed default RTP info (fbadmul, fbadlin, dbf) when switching between faxes.

Products: MT5634ZBA-DID, MT5634ZBA-V92

Fixed - A modem disconnect problem. The modem may take up to 30 seconds to disconnect when the DTR signal is dropped.

Products: MT5634ZBA-V92, MT5634ZBA-V-V92

Fixed - A modem Connect / Handshake failure. When receiving a CFR (Confirmation to Receive -a confirmation the initial speed was good) and the modem gets a CRC error, the modem times-out and the the session is dropped with a FHS:20 error response.

Products: MT5634ZBA-V92, MT5634ZBA-V-V92

Why does the light on my modem say 56 at all times. Shouldn't the 33 or 16 light up when sending or receiving a fax

Products: MT5634ZBA-V92, MT5634ZBA-V-V92, MT5634ZBA-V92, MT5634ZBA

Made a modification so +MS=V32 displays 9600, not 14400 and +MS=V32B displays 14400 not 19200 in the command (AT+MS). ATI11 now says V32B instead of V32 on a 14400 connection.

Products: MT5634ZPX-PCI-V92, MT5634ZBA-V92

In class 2.1 at 14400 ECM, certain line conditions cause +FHS:A0 errors. Receives faxes better in V.17 mode.

Products: MT5634ZBA-DID, MT5634ZBA-V92

Fixed a problem when receiving a fax from some fax machines at V.34 and faster than 14.4k. The error would be +FHS:A0.

Products: MT5634ZBA-DID, MT5634ZBA-V92

The RX buffer now checks for overflow conditions when performing Class 2x ECM faxes. Faxes had errors.

Products: MT5634ZBA-DID, MT5634ZBA-V92

The modem is now allowed to step down in speed based on the number of bad frames in V.34 fax connections. Previously, the modem would just disconnect.

Products: MT5634ZBA-DID, MT5634ZBA-V92

A new installer for Mac OS X 10.3.x Panther resolves an issue with our USB modems when working through a hub.

Products: MT5634ZBA-USB-V92, MT5634ZBA-USB, MT5634MU

If I set a country code in the Global Modem (i.e., AT%T19,0,1) and then do an AT&F (load factory defaults) command, does this reset the country code

Product: MT5634ZBA

Fixed a problem where S register 0 is being set to a value of 0 when callback security is enabled and the modem connects at 300bps.

Products: MT5634ZBA-V92, MT5634ZBA-V-V92

Added - A $LLn command to control the V.34 handshake method used during modem to modem leased line connections.

Product: MT5634ZBA-V92

Won't Answer

Products: MT5634ZBA, MT5634ZBA-V-V92, MT5634ZBA-V92, MT5634ZBA-DID

Does this modem support V.25 calling tone functionality We tried ATD^T and then the phone number and you should be able to pick up the phone and hear a tone. It didn't work (we thought this was how to check it).

Products: MT5634SMI, MT5634SMI, MT5634SMI-34, MT5634SMI-92, MT5634SMI-92, MT5634SMI-IP, MT5634SMI-P, MT5634SMI-P-92, MT5634ZBA, MT5634ZBA-DID, MT5634ZBA-USB, MT5634ZBA-USB-V92, MT5634ZBA-V92, MT5634ZPX-PCI, MT5634ZPX-PCI-V92

X Off (XOFF) characters may be continuously output.

Products: MT5634ZBA-V92, MT5634ZPX-PCI-V92

Fixed a problem where the modem would give a FHNG / FHS:71 error when receiving a Class 2, 2.0, 2.1 fax at non-V.34 speeds.

Product: MT5634ZBA-DID

Fixed a problem with intermittant C.34 fax call failures. The fax (command repeat) frames were not handled in Class 2.1 V.34 mode.

Product: MT5634ZBA-DID

Occasionally a Class 2.x fax call fails because the AT+FDR command is not recognized by the modem. This may happen in approximately 1 of 200 faxes received.

Product: MT5634ZBA-DID

Fixed a lock up problem if DTR is dropped on a Class 2.1 V.34 connection.

Product: MT5634ZBA-DID

Does this modem support the Hook Flash command for transfering a call to another number

Products: MT5634ZBA, MT5634MSV, MT5634ZBA-DID, MT5634ZBA-USB, MT5634ZBA-USB-V92, MT5634ZBA-V92, MT5634ZPX, MT5634ZPX-PCI, MT5634ZPX-PCI-U, MT5634ZPX-PCI-V92

The manual says that the Analog to Digital barrier on the drawing is really a safety isolation barrier between TNV and SELV. What does this mean

Products: MT3400SMI, MT5634MSV, MT5634ZBA, MT5634ZBA-DID, MT5634ZBA-V92, MT5634ZPX, MT5634ZPX-PCI, MT5634ZPX-PCI-V92, MT2834BA, MT2834BC, MT2834BL, MT2834BLR, MT2834BR, MT2834LTI, MT2834ZDXb, MT2834ZDXb-U, MT2834ZPX, MT3334SMI, MT5634SMI, MT5634SMI-P, MT5600SMI

If in fax class 2x and the fax errors out with 0xE0 (140), time out error, then the next incoming ring locks up the modem requiring a power cycle.

Products: MT5634ZBA-DID, MT5634ZBA-V92, MT5634ZPX-PCI

Fixed - A problem sending multiple page faxes. Fax pages 2 and above may take longer to send than page 1.

Product: MT5634ZBA-V92

Added - Fax handshake terminate session response. Upon receiving a EOR (End Of Retransmission), the modem will terminate the session with a +FHS:A7 response (Call termination status).

Product: MT5634ZBA-V92

Improved - The reliability of V.34 Faxes during power surge hits on the phone-line. Changes were done to make the modem able to survive these events.

Product: MT5634ZBA-V92

Fixed - When receiving a fax with Microsoft Fax (MS FAX), pages would be lost.

Product: MT5634ZBA-V92

Fixed - (+FHS:A0 ) errors when the HP LaserJet 3015 sends certain faxes to a V.92 MultiModem. The modem would go into a CTC / EOR state and time-out instead of continuing to receive on the primary channel.

Product: MT5634ZBA-V92

Fixed - A modem lock-up problem in Fax Class (1.0). After receiving the CSI frame, a DTR signal drop caused a modem lock-up.

Product: MT5634ZBA-V92

Fixed - A fax abort problem. When making a V.34 connection, entering the AT+FKS command may not cause a fax abort.

Product: MT5634ZBA-V92

A line in the ATI11 response was added to report connection time.

Product: MT5634ZBA-V92

Fixed the AT&P command (Pulse Dial make / break ratio). Now the modem does not respond with double OK's.

Products: MT5634ZPX-PCI-V92, MT5634ZBA-V92

Fixed - A loss of data problem when receiving class 2 or 2.x faxes.

Product: MT5634ZBA-V92

Fixed - A connect problem when the MT5634ZBA-V92 calls a MT2834BL.

Products: MT5634ZBA-V92, MT2834BL

Do the MT5634ZBA-USB modems support lease line operation

Products: MT5634ZBA-USB, MT5634ZBA-USB-V92

Do the MT5634ZBA modems work on 2 wire dedicated leased lines

Products: MT5634ZBA, MT5634ZBA-V92

Does this modem support synchronous data

Products: MT5634ZBA, MT5656ZDX, MT5656ZDXV

I setup my modem to receive a class 2 fax, but I don't recognize the incoming data using HyperTerminal.

Products: MT3334SMI, MT5634MSV, MT5634ZBA, MT5634ZBA-DID, MT5634ZBA-V92, MT5634ZPX, MT5634ZPX-PCI, MT5634ZPX-PCI-V92, MT2834BA, MT2834BC, MT2834BL, MT2834BLR, MT2834BR, MT2834LTI, MT2834ZDXb, MT2834ZDXb-U, MT2834ZPX, MT5634SMI, MT5634SMI-P

Does this modem support modem-on-hold If it does, how do I enable it

Product: MT5634ZBA-V92

Where can I find the voice command documentation

Products: MT5634ZBA, MT5634MSV, MT5634ZPX, MT5634ZPX-PCI, MT5634ZPX-PCI-V92

Does not install in Linux

Products: MT5634ZBA-USB, MT5634ZBA-USB-V92, MT5634MU

Allow pages to be transmitted that would get through with errors on the pages even in an error corrected environment (ala V.34). Issue only occurs when a V.34 fax connection is made.

Product: MT5634ZBA-DID

It's possible that a received fax will now complete where before it would have quit part way through with an +FHS:72 error.

Product: MT5634ZBA-DID

A cut off page could be received without registering it as a bad page so that the sender could re-send it.

Product: MT5634ZBA-DID

The DID line will now remain busied out after a call on the pots port according to the Busy-Out Timer at End of Call command.

Product: MT5634ZBA-DID

Problem with failed faxes when receiving faxes from 300 x 300 fax machines.

Product: MT5634ZBA-DID

Problem sending faxes to certain fax machines: The fix limits the length of DCS frame to be equal to the shortest length between between the DIS and DCS frames.

Product: MT5634ZBA-DID

Modem no longer responds to commands:

Product: MT5634ZBA-DID

Problem with data not coming out for an extended period of time when receiving a fax in class 2 / 2.x.

Product: MT5634ZBA-DID

The Enable PCM Upstream command is changed to AT+PIG=0.

Product: MT5634ZBA-V92

When receiving an incoming call after a power up and within the Set Command Mode Time (%DT timer), the modem will not pass data.

Product: MT5634ZBA-V92

Unpredictable problems may occur if the modem initialization is interrupted by the next incoming call.

Product: MT5634ZBA-DID

The modem will not answer or connect when a call comes in and the modem has Caller ID enabled and Caller ID information is not provided by the phone line.

Products: MT5634ZBA-V92, MT5634ZPX-PCI-V92

I can't set the Abort Timer (S7 register) below 35.

Products: MT3334ZDX, MT5634MSV, MT5634ZBA, MT5634ZBA-DID, MT5634ZBA-V92, MT5634ZPX, MT5634ZPX-PCI, MT5634ZPX-PCI-V92, MT3334SMI, MT5634SMI, MT5634SMI-P

I can't connect to a 3 Com modem(U S Robotics) at 1200 or 2400bps, it drops to 300bps.

Products: MT3334ZDX, MT5634MSV, MT5634ZBA, MT5634ZBA-DID, MT5634ZBA-V92, MT5634ZPX, MT5634ZPX-PCI, MT5634ZPX-PCI-V92, MT3334SMI, MT5634SMI, MT5634SMI-P

Can I connect two phone lines to this modem

Products: MT5634ZPX-PCI-V92, MT5634MSV, MT5634ZBA, MT5634ZBA-V92, MT5634ZPX, MT5634ZPX-PCI, MT2834BA, MT2834BC, MT2834BL, MT2834BLR, MT2834BR, MT2834LTI, MT2834ZDXb, MT2834ZDXb-U, MT2834ZPX, MT3334ZDX, MT3334SMI, MT5634SMI, MT5634SMI-P

How do we force an error correcting connection

Products: MT5634SMI, MT5634MSV, MT5634ZBA, MT5634ZBA-DID, MT5634ZBA-V92, MT5634ZPX, MT5634ZPX-PCI, MT3334SMI, MT5634SMI, MT5634SMI-P

Can I use the MT2834BL on a 56K DDS line

Products: MT2834BL, MT5634MSV, MT5634ZBA, MT5634ZBA-V92, MT5634ZPX, MT5634ZPX-PCI, MT2834BA, MT2834BC, MT2834BL, MT2834BLR, MT2834BR, MT2834LTI, MT2834ZDXb, MT2834ZDXb-U, MT2834ZPX, MT3334ZDX, MT3334SMI, MT5634SMI, MT5634SMI-P

Does this modem support 11 bit operation

Products: MT5634SMI, MT5634ZBA, MT5634ZBA-DID, MT5634ZBA-V92, MT5634ZPX, MT3334SMI

Does this modem support modem on hold (MOH)

Products: MT5634ZPX-PCI, MT5634MSV, MT5634ZBA, MT5634ZPX, MT2834BA, MT2834BC, MT2834BL, MT2834BLR, MT2834BR, MT2834LTI, MT2834ZDXb, MT2834ZDXb-U, MT2834ZPX, MT3334ZDX, MT3334SMI

Does this modem support MNP10 error correction

Products: MT5634ZLX, MT5634MSV, MT5634ZBA, MT5634ZBA-DID, MT5634ZBA-V92, MT5634ZPX, MT5634ZPX-PCI, MT5634ZPX-PCI-V92, MT2834BA, MT2834BC, MT2834BL, MT2834BLR, MT2834BR, MT2834LTI, MT2834ZDXb, MT2834ZDXb-U, MT2834ZPX, MT3334ZDX, MT3334SMI, MT5634SMI, MT5634SMI-P, MT56128ZLX, MT56128ZLX-NT, MT56128ZLX-ST, MT5634ZLX, MT5634ZLX-E, MT5634ZLX-FE, MT1432BA, MT1432BC, MT1432BL, MT1432BLR, MT1432LT, MT1432MU, MT1432ZDX, MT1932BL, MT1932ZDX, MT1932ZPX, MT1932ZPX2, MT212xx, MT224xx, MT932xx, MT2834LT, MT3334LT, MT3400ZLX

I want to use the +VXT command(Translate Voice Data option), but I receive an 'ERROR' response.

Products: MT5634ZPX-PCI, MT5634MSV, MT5634ZBA, MT5634ZBA-DID, MT5634ZBA-V92, MT5634ZPX, MT5634ZPX-PCI-V92, MT2834BA, MT2834BC, MT2834BL, MT2834BLR, MT2834BR, MT2834LTI, MT2834ZDXb, MT2834ZDXb-U, MT2834ZPX, MT3334ZDX, MT3334SMI, MT5634SMI, MT5634SMI-P

Does this modem support MH, MRH and MMR compression

Products: MT5634ZPX-PCI, MT5634MSV, MT5634ZBA, MT5634ZPX, MT5634ZPX-PCI, MT2834BA, MT2834BC, MT2834BL, MT2834BLR, MT2834BR, MT2834LTI, MT2834ZDXb-U, MT2834ZDXb, MT2834ZPX, MT3334ZDX, MT3334SMI

Is there a command that indicates the fax classes that the modem supports

Products: MT5600ZDX, MT5634MSV, MT5634ZBA, MT5634ZBA-DID, MT5634ZBA-V92, MT5634ZPX, MT5634ZPX-PCI, MT5634ZPX-PCI-V92, MT2834BA, MT2834BC, MT2834BL, MT2834BLR, MT2834BR, MT2834LTI, MT2834ZDXb, MT2834ZDXb-U, MT2834ZPX, MT3334ZDX, MT3334SMI, MT5634SMI, MT5634SMI-P, MT5600BA, MT5600BL, MT5600DSVD, MT5600DSVD2, MT5600BA-V92, MT5656ZDXV, MT5656ZDX

Does this modem support V.26 Differential PSK

Products: MT2834BLR, MT5634MSV, MT5634ZBA, MT5634ZBA-DID, MT5634ZBA-V92, MT5634ZPX, MT5634ZPX-PCI, MT5634ZPX-PCI-V92, MT2834BA, MT2834BC, MT2834BL, MT2834BR, MT2834LTI, MT2834ZDXb, MT2834ZDXb-U, MT3334ZDX, MT3334SMI, MT5634SMI, MT5634SMI-P

Does this modem have a line problem command

Products: MT5634ZPX, MT5634MSV, MT5634ZBA, MT5634ZBA-DID, MT5634ZBA-V92, MT5634ZPX-PCI, MT5634ZPX-PCI-V92, MT3334SMI, MT5634SMI, MT5634SMI-P

Does this modem support DID (Direct inward dialing)

Products: MT2834BA, MT5634MSV, MT5634ZBA, MT5634ZBA-V92, MT5634ZPX, MT5634ZPX-PCI, MT5634ZPX-PCI-V92, MT2834BC, MT2834BL, MT2834BLR, MT2834BR, MT2834LTI, MT2834ZDXb, MT2834ZDXb-U, MT2834ZPX, MT3334ZDX, MT3334SMI, MT5634SMI, MT5634SMI-P

Does this modem automatically adjust to receive levels between 0 and 43 dBM

Products: MT5600BA, MT5634MSV, MT5634ZBA, MT5634ZBA-DID, MT5634ZBA-V92, MT5634ZPX, MT5634ZPX-PCI, MT5634ZPX-PCI-V92, MT2834BA, MT2834BC, MT2834BL, MT2834BLR, MT2834BR, MT2834LTI, MT2834ZDXb, MT2834ZDXb-U, MT2834ZPX, MT3334ZDX, MT3334SMI, MT5634SMI, MT5634SMI-P, MT5600BA-V92, MT5600BL, MT5600ZDX, MT5600ZDXV, MT5656ZDX, MT5656ZDXV, MT5600DSVD, MT5600DSVD2, MT1432PCS, MT1432PCS2, MT1432PCS3, MT1432PCSI, MT1932PCS, MT2834PCS, MT2834PCS2

Does this modem work on a digital line

Products: MT2834BL, MT5634MSV, MT5634ZBA, MT5634ZBA-V92, MT5634ZPX, MT5634ZPX-PCI, MT5634ZPX-PCI-V92, MT2834BA, MT2834BC, MT2834BLR, MT2834BR, MT2834LTI, MT2834ZDXb, MT2834ZDXb-U, MT2834ZPX, MT3334ZDX, MT3334SMI, MT5634SMI, MT5634SMI-P

Does this modem support Multi Drop (Multi Point) connections (Lines)

Products: MT2834MR, MT5600BL, MT1432BA, MT1432BC, MT1432BL, MT1432BLR, MT1432MR, MT1432MU, MT1432PCS, MT1432PCS2, MT1432PCS3, MT1432ZDX, MT1932BL, MT1932PCS, MT1932ZDX, MT212xx, MT224xx, MT2834BA, MT2834BL, MT2834BLR, MT2834BR, MT2834MR-PSTN, MT2834MR6, MT2834ZDXb, MT2834ZDXb-U, MT3334HD8, MT3334SMI, MT3334ZDX, MT3400SMI, MT5600BA, MT5600BA-V92, MT5600DSVD, MT5600DSVD2, MT5600SMI, MT5600ZDX, MT5600ZDXV, MT5634HD16, MT5634HD8, MT5634MSV, MT5634MU, MT5634SMI, MT5634SMI-DK, MT5634SMI-IP, MT5634SMI-P, MT5634ZBA, MT5634ZBA-DID, MT5634ZBA-USB, MT5634ZBA-USB-V92, MT5634ZBA-V92, MT932xx, SC144H0, SC144H1, SC144H1-L, SC336H0, SC336H1, SC336H1-L, SC56H0, SC56H1, SC56H1-L, SF144D/SPH0D5, SF144D/SPH1D5, SF224ATF/H0D5, SF224ATF/H1D5, SF336D/SPH0D5, SF336D/SPH1D5, SF336D/SPH1DC, SF56D/SPH0D5, SF56D/SPH1D5, SocketModem EOL

Is there a way to turn off this modem remotely as a security measure

Products: MT5634ZBA, MT5634MSV, MT5634ZBA-DID, MT5634ZBA-V92, MT5634ZPX, MT5634ZPX-PCI, MT5634ZPX-PCI-V92, MT2834BA, MT2834BC, MT2834BL, MT2834BLR, MT2834BR, MT2834LTI, MT2834ZDXb, MT2834ZDXb-U, MT2834ZPX, MT3334ZDX, MT3334SMI, MT5634SMI, MT5634SMI-P

What is the command to set the serial speed to 9600

Products: MT2834ZDXb, MT5634MSV, MT5634ZBA, MT5634ZBA-DID, MT5634ZBA-V92, MT5634ZPX, MT5634ZPX-PCI, MT5634ZPX-PCI-V92, MT2834BA, MT2834BC, MT2834BL, MT2834BLR, MT2834BR, MT2834LTI, MT2834ZDXb-U, MT2834ZPX, MT3334ZDX, MT3334SMI, MT5634SMI, MT5634SMI-P

Will the modem or phone ring when the phone is plugged into the phone jack and a call comes into the modem

Products: MT5600ZDX, MT5634MSV, MT5634ZBA, MT5634ZBA-DID, MT5634ZBA-V92, MT5634ZPX, MT5634ZPX-PCI, MT5634ZPX-PCI-V92, MT2834BA, MT2834BC, MT2834BL, MT2834ZDXb, MT2834ZDXb-U, MT2834ZPX, MT3334ZDX, MT5600ZDXV

My modem will not connect with my ISP's modem.

Products: MT2834ZDXb, MT5634MSV, MT5634ZBA, MT5634ZBA-DID, MT5634ZBA-V92, MT5634ZPX, MT5634ZPX-PCI, MT5634ZPX-PCI-V92, MT2834BA, MT2834BC, MT2834BL, MT2834BLR, MT2834BR, MT2834LTI, MT2834ZDXb-U, MT2834ZPX, MT3334ZDX

What initialization string should I use when dialing into the Internet

Products: MT2834ZDXb, MT5634MSV, MT5634ZBA, MT5634ZBA-DID, MT5634ZBA-V92, MT5634ZPX, MT5634ZPX-PCI, MT5634ZPX-PCI-V92, MT2834BA, MT2834BC, MT2834BL, MT2834BLR, MT2834BR, MT2834LTI, MT2834ZPX, MT3334ZDX

What is the number of the MultiTech BBS The number in the manual does not answer.

Products: MT2834ZPX, MT5634MSV, MT5634ZBA, MT5634ZBA-DID, MT5634ZBA-V92, MT5634ZPX, MT5634ZPX-PCI, MT5634ZPX-PCI-V92, MT2834BA, MT2834BC, MT2834BL, MT2834BLR, MT2834BR, MT2834LTI, MT2834ZDXb, MT2834ZDXb-U, MT3334ZDX, MT3334SMI, MT5634SMI, MT5634SMI-P

My modem won't answer an incoming call, when a call comes in, the modem just beeps

Products: MT5600ZDXV, MT5634MSV, MT5634ZBA, MT5634ZBA-V92, MT2834BA, MT2834BL, MT2834BLR, MT2834BR, MT2834ZDXb, MT2834ZDXb-U, MT3334ZDX, MT5600BA, MT5600BL, MT5600BA-V92, MT5600ZDX, MT5656ZDX, MT5656ZDXV, MT5600DSVD2, MT5600DSVD, MT1432PCS, MT1432PCS2, MT1432PCS3, MT1432PCSI, MT1932PCS, MT2834PCS, MT2834PCS2

How do you view the modem's parameters / configuration

Products: MT5634ZBA, MT5634MSV, MT5634ZBA-DID, MT5634ZBA-V92, MT5634ZPX, MT5634ZPX-PCI, MT5634ZPX-PCI-V92, MT3334SMI, MT5634SMI, MT5634SMI-P

Does this modem support the ITU-T V.8 standard

Products: MT5634ZBA, MT5634MSV, MT5634ZBA-DID, MT5634ZBA-V92, MT5634ZPX, MT5634ZPX-PCI, MT5634ZPX-PCI-V92, MT5634SMI, MT5634SMI-P

Can the speaker volume be lowered or turned off on this modem

Products: MT5600ZDX, MT1432BA, MT1432BC, MT1432BL, MT1432MU, MT1432PCS, MT1432PCS2, MT1432PCS3, MT1432PCSI, MT1432ZDX, MT1932BL, MT1932PCS, MT1932ZDX, MT1932ZPX, MT1932ZPX2, MT5600ZDXV, MT5634ZBA-V92, MT5634ZBA-USB-V92, MT5656ZDX, MT212xx, MT224xx, MT2834BA, MT2834BC, MT2834BL, MT2834PCS, MT2834PCS2, MT2834ZPX, MT3334ZDX, MT5600BA, MT5600BL, MT5600DSVD, MT5600DSVD2, MT5634MSV, MT5634MU, MT5634ZBA, MT5634ZBA-USB, MT5634ZPX, MT5634ZPX-PCI, MT932xx, MT2834ZDXb, MT5634ZBA-DID, MT2834ZDXb-U, MT5634ZPX-PCI-V92, MT5600BA-V92, MT5656ZDXV, MT2834ZPW, MT5634ZPW

Does this modem support remote configuration

Products: MT2834ZDXb-U, MT5634MSV, MT5634ZBA, MT5634ZBA-DID, MT5634ZBA-V92, MT5634ZPX, MT5634ZPX-PCI, MT5634ZPX-PCI-V92, MT5634SMI, MT5634SMI-IP, MT3334ZDX, MT3334SMI

Which of your external modems support distinctive ring

Products: MT5600ZDX, MT5600BA, MT5600BA-V92, MT5600BL, MT5600DSVD, MT5600DSVD2, MT5600ZDX, MT5600ZDXV, MT5634MSV, MT5634MU, MT5634ZBA, MT5634ZBA-DID, MT5634ZBA-USB, MT5634ZBA-USB-V92, MT5634ZBA-V92, MT5656ZDX, MT5656ZDXV

Does this modem support Error Correcting Mode (ECM) when faxing

Products: MT5600ZDX, MT5634ZBA-V92

How long is the warranty for the MultiModemZBA and MultiModemUSB series modems

Products: MT5634ZBA, MT5634ZBA-USB, MT5634ZBA-USB-V92, MT5634ZBA-DID, MT5634ZBA-V92, MT5634MU

Does this modem support call back security

Products: MT5634ZBA-USB, MT2834ZDXb, MT5634MU, MT5634ZLX, MT5634ZLX-E, MT5634ZLX-FE, MT2834ZDXb-U

How can I access AT commands in leased line mode

Products: MT2834BR, MT932xx, MT1432BA, MT1432BL, MT1432BLR, MT1932BL, MT224xx, MT2834BA, MT2834BL, MT2834BLR, MT2834MR, MT5600BA-V92, MT5600BL, MT5634ZBA, MT5634ZBA-USB, MT5634ZBA-USB-V92, MT5634ZBA-V92

ATI11 example - Displays diagnostic information for the last modem connection, such as DSP and firmware version, link type, line speed, serial speed, type of error correction/data compression, number of past retrains, etc.

Product: MT5634ZBA

Does the MT5634ZBA_USB operate under Windows NT

Products: MT5634ZBA-USB, MT5634ZBA-USB-V92, MT5634MU

Will this modem operate with Linux Do you have drivers for Linux

Products: MT5634ZBA, MT5634ZBA-V92

Is this modem Hayes Auto Sync Compatable

Products: MT2834BA, MT5634MSV, MT5634ZBA, MT5634ZBA-DID, MT5634ZBA-V92, MT5634ZPX, MT5634ZPX-PCI, MT5634ZPX-PCI-V92, MT3334SMI, MT5634SMI, MT5634SMI-P

Problem when sending a fax to a few fax machines. One page gets stretched into two pages.

Product: MT5634ZBA-V92

Is there any built-in memory for this modem that allows it to receive a fax even if my PC is off ( But the modem is on )

Product: MT5634ZBA-V92

Does this modem send a 48 volt Wink Start with a ground reference

Product: MT5634ZBA-DID

How do I send Super G3 faxes (V.34) with Phonetools software

Products: MT5634ZBA-V92, MT5634ZBA-DID, MT5634ZPX-PCI-V92

What is the maximum distance for leased lines

Products: MT2834BL, MT2834BA, MT2834BLR, MT2834BR, MT5634ZBA, MT5634ZBA-V92

How do I install my USB modem system extension (driver) in Mac OS 9.x

Products: MT5634ZBA-USB, MT5634ZBA-USB-V92, MT5634MU

What is the USB specification for this modem, will it run at 3.3 volts

Products: MT5634ZBA-USB, MT5634MU, MT5634ZBA-USB-V92

Installing products in Mac OS X

Products: MT5634ZBA-USB, MT5634ZBA-USB-V92, MT5634MU, MTA128ST-USB

Windows XP cannot find usbser.sys when trying to install my USB modem.

Products: MT5634MU, MT5634ZBA-USB-V92, MT5634ZBA-USB

How do I install my Multi-Tech modem or terminal adapter in Mac OS X

Products: MT5634ZBA-USB, MT5634MU, MT5634ZBA-USB-V92

Installs but doesn't work in Windows ME

Products: MT5634ZBA-USB, MT5634ZBA-USB-V92

Modem not detected

Products: MT5634ZBA-USB, MT5634ZBA-USB-V92, MT5634MU

USB modem installed with wrong drivers for the OS

Products: MT5634ZBA-USB, MT5634ZBA-USB-V92

Does this modem support the Super G3 fax standard

Products: MT5634ZBA-V92, MT5634ZPX-PCI-V92

Does the MT5634ZBA-V92 support class 2.0 faxing

Product: MT5634ZBA-V92

Does the MT5634ZBA support class 2.0 faxing

Product: MT5634ZBA

What is the tolerance for the input voltage on this modem

Products: MT5634ZBA, MT5634ZBA-V92

What is the command for enabling the quick connect feature of this modem

Products: MT5634SMI, MT5634ZBA, MT5634ZBA-DID, MT5634ZBA-V92, MT5634ZPX, MT5634ZPX-PCI, MT5634ZPX-PCI-V92, MT3334SMI, MT5634SMI-P

The ZBA will not connect with other manufacturers modems in leased line operation mode.

Product: MT5634ZBA

Updating 5634ZBA_USB driver in Windows XP, cannot find usbser.sys

Product: MT5634ZBA-USB

What is the UL certification file number for this modem

Products: MT2834ZDXb, MT2834BA, MT2834BL, MT2834BR, MT2834BLR, MT2834MR6, MT3334SMI, MT3400SMI, MT5600BA, MT5600BA-V92, MT5600BL, MT5600SMI, MT5600ZDX, MT5634MU, MT5634SMI, MT5634ZBA, MT5634ZPX-PCI, MT5656ZDX, MT5634ZBA-USB

Do any of your international modems support caller id

Products: MT5634ZBA, MT5634ZBA-V92, MT5634ZBA-USB

In Mac OS 9.1 or 9.2, uninstall ARA 4.x, install ARA 3.5 to avoid dial-up bug

Products: MTA128ST, MT5634MU, MT5634ZBA-USB, MT5634ZBA-USB-V92, MTA128NT, MTA128ST-USB, RASExpress, MT5600ZDX, MT2834BA, MT3334ZDX, MT5600BA, MT5600BA-V92, MT5634ZBA

The modem crashes Redhat 7.3 with USB (2.0).

Products: MT5634ZBA-USB, MT5634MU, MT5634ZBA-USB-V92

How do I update the firmware and drivers to operate with Windows XP

Product: MT5634ZBA-USB

My Mac has a USB port, what modem do you recommend

Products: MT5634ZBA-USB, MT5634ZBA-USB-V92

Does this modem support DTR dialing

Products: MT2834BL, MT5634ZBA, MT5634ZBA-DID, MT5634ZBA-V92, MT3334SMI, MT5634SMI

Does this modem support Caller ID

Product: MT5634ZBA-USB

Can the Global modem's power supply be used in Europe

Product: MT5634ZBA

Is an RS232 serial cable shipped with this modem

Product: MT5634ZBA-V92

Release notes for 8.18i to 8.19d

Product: MT5634ZBA

Modem on Hold not initializing modem

Product: MT5634ZBA-V92