CommPlete™ 4000 Resolutions

Products: MT2834MR, MT2834MR-PSTN, MT2834MR6, PS4800, PS9600, CC2400, CC4800, CC9600, MR4800, MR4800E, MR9600, MR9600-100, MT1432MR, MT3334HD8, MT5634HD16, MT5634HD8

Updated: 2/19/2004 4:52:32 PM

We have a Multitech CommPlete 9600 chassis with a single T1/PRI kit (24-port) installed. It's been working great, but due to some internal policy changes we need an analog equivalent. Can this chassis handle analog modem cards

Products: CC9600, CC2400

Updated: 12/29/2004 3:04:19 PM

Improper display of Date and Time.

Products: CC4M-8, CC4H-4S, CC4H-4U, CC4S-8

Updated: 10/7/2004 9:39:27 AM

The Hard Drive of the unit has bad sectors. When the device is rebooted it gets to a stage where it tries to load an application and then it says Drive or device not ready and hangs there until you press a key. What can we do to solve this problem

Product: CC4M-8

Updated: 10/6/2004 2:47:06 PM

It looks like the Multitech Server does not support RFC 2548. So if the password has expired, the RAS sever does not receive a message to change the password. That means, after the expired date you can't logged in.

Product: CC4H-4S

Updated: 1/8/2004 3:27:35 PM

I'm looking for information on how to configure the Commplete 4000 as a fax server.

Product: CC4M-8

Updated: 1/21/2004 1:05:07 PM

When trying to restrict user login time using the configuration menu, the time chart is not allowing us to make a change, all fields are filled with 'Y'. Please let us know how to restrict user loggin time.

Product: CC4M-8

Updated: 9/25/2003 11:18:07 AM

Do you have any product comparable to the Shiva LanRover E Plus

Product: CC4M-8

Updated: 9/25/2003 11:27:47 AM

I'm using the CC4000 as a 16 line dialup server, does it have NAT inside

Product: CC4M-8

Updated: 9/25/2003 12:24:42 PM

When I make a call to a MN128 adapter (made by NTT-ME) they don't connect.

Products: ISIHP-2S, CC4H-4S, CC4H-4U, ISIHI-2S, ISIHI-2Sv, ISIHI-2U, ISIHP-1S, ISIHP-24, ISIHP-2U, ISIHP-4U, ISIHP-4S-V110, ISIHP-4SD, ISIHP-4SD-V110, ISIHP-4U-V110, ISIHP-4UD

Updated: 9/23/2003 7:03:41 PM

What is the floppy drive used for and how do I use it

Product: CC4M-8

Updated: 9/22/2003 1:32:29 PM

How do I change the port number for auto Telnet to port 88 instead of the default Telnet port

Product: CC4M-8

Updated: 9/22/2003 1:32:29 PM

How can I setup an SMTP client so the log files will be emailed to me automatically when it is full

Product: CC4H-4U

Updated: 9/22/2003 1:32:29 PM

Problem If some applications are looking for the CTS signal for flow control.

Products: CC4M-8, CC4H-4S, CC4H-4U, CC4S-8

Updated: 9/22/2003 1:32:29 PM

Active PPP sessions or connections are not getting reset.

Products: CC4M-8, CC4S-8, CC4H-4U, CC4H-4S

Updated: 9/22/2003 1:32:29 PM

RAS AT commands get wiped out after a reboot.

Products: CC4M-8, CC4H-4S, CC4H-4U, CC4S-8

Updated: 9/22/2003 1:32:29 PM

Administrative users are now given access to perform FTP.

Products: CC4M-8, CC4S-8, CC4H-4U, CC4H-4S

Updated: 9/22/2003 1:32:29 PM

Problem terminating a Telnet Session after hanging up a dial out session.

Products: CC4M-8, CC4H-4S, CC4H-4U, CC4S-8

Updated: 9/22/2003 1:32:29 PM

Terminal connection problem when using a DHCP Server to assign addresses.

Products: CC4M-8, CC4S-8, CC4H-4U, CC4H-4S

Updated: 9/22/2003 1:32:29 PM

Problem with IP Assignment through a DHCP server, when the authentication fails for the first time due to a bad Username / Password, and connects successfully in the subsequent attempts after entering a correct Username / Password.

Products: CC4M-8, CC4H-4S, CC4H-4U, CC4S-8

Updated: 9/22/2003 1:32:29 PM

Authentication problem with an empty User Database, when the Windows 2000 dial-up client uses authentication protocols other than PAP & CHAP.

Products: CC4M-8, CC4S-8, CC4H-4U, CC4H-4S

Updated: 9/22/2003 1:32:28 PM

Problem with CHAP authentication when using Windows 2000 IAS.

Products: CC4M-8, CC4H-4S, CC4H-4U, CC4S-8

Updated: 9/22/2003 1:32:28 PM

Modified SNMP module to support WINS Configuration through Multi-Manager.

Products: CC4M-8, CC4S-8, CC4H-4U, CC4H-4S

Updated: 9/22/2003 1:32:28 PM

Added support for WINS (NBNS Negotiations).

Products: CC4M-8, CC4H-4S, CC4H-4U, CC4S-8

Updated: 9/22/2003 1:32:28 PM

Slow throughput when using MLPPP MultiChassis bonding.

Products: CC4M-8, CC4H-4S, CC4H-4U, CC4S-8

Updated: 9/22/2003 1:32:28 PM

Changed the default values of the RADIUS Authentication & Accounting port numbers.

Products: CC4M-8, CC4H-4S, CC4H-4U, CC4S-8

Updated: 9/22/2003 1:32:28 PM

Port 10 has a problem connecting when using a DHCP server to assign the address.

Products: CC4M-8, CC4H-4S, CC4H-4U, CC4S-8

Updated: 9/22/2003 1:32:28 PM

Problems with Z-Modem file transfers when using a MCSI client.

Products: CC4M-8, CC4H-4S, CC4H-4U, CC4S-8

Updated: 9/22/2003 1:32:28 PM

Included an option in RASCON to enable / disable authentication when dial out via a custom port, (i.e. 8000).

Products: CC4M-8, CC4H-4S, CC4H-4U, CC4S-8

Updated: 9/22/2003 1:32:28 PM

Modified Telnet module to prompt for user name and password for dial out clients using third party dial out applications, (i.e. Tacticals- EZ-Dial Out).

Products: CC4M-8, CC4H-4S, CC4H-4U, CC4S-8

Updated: 9/22/2003 1:32:28 PM

Crashing problem which occurs when configuring through Telnet.

Products: CC4M-8, CC4H-4S, CC4H-4U, CC4S-8

Updated: 9/22/2003 1:32:28 PM

Resetting problem in hybrid cards where it continuously switches between out of service, waiting for call, and init.

Products: ISIHP-2S, CC4H-4S, CC4H-4U, CC4S-8

Updated: 9/22/2003 1:32:28 PM

RAS reboots when adding filter entries or when Radius authentication is done through Steel Belted Radius with a class attribute of more than 48 bytes.

Products: CC4M-8, CC4H-4S, CC4H-4U, CC4S-8

Updated: 9/22/2003 1:32:28 PM

Windows domain locking out the user when using IAS Radius in Windows 2000.

Products: CC4M-8, CC4H-4S, CC4S-8, CC4H-4U

Updated: 9/22/2003 1:32:28 PM

We are not able to get a callback from the RAS Server on Windows 2000.

Products: CC4M-8, CC4H-4S, CC4H-4U, CC4S-8

Updated: 9/22/2003 1:32:28 PM

Does the CommPlete 4000 support Extended Telnet Options RFC 2217

Products: CC4M-8, CC4H-4S, CC4H-4U, CC4S-8

Updated: 9/22/2003 1:32:28 PM

Slow authentication when CCP is disabled on the server.

Products: RASExpress, CC4H-4S, CC4H-4U, CC4M-8, CC4S-8

Updated: 9/22/2003 1:32:28 PM

Extra LF seen by the telnet client for telnet auto dialout.

Products: RASExpress, CC4H-4S, CC4H-4U, CC4M-8, CC4S-8

Updated: 9/22/2003 1:32:28 PM

- RASCON.EXE : Crashing problem in ISA card port testing.

Products: RASExpress, CC4H-4S, CC4H-4U, CC4M-8, CC4S-8

Updated: 9/22/2003 1:32:28 PM

Upon disconnecting, a modem does not drop carrier. Now we wait for the idle timeout, disconnect, and if the carrier is not dropped in 2 minutes time, again force disconnect and reset the port.

Products: RASExpress, CC4H-4S, CC4H-4U, CC4M-8, CC4S-8

Updated: 9/22/2003 1:32:28 PM

Port number problem in radius accounting for telnet dialout which could crash during shut down.

Products: RASExpress, CC4H-4S, CC4H-4U, CC4M-8, CC4S-8

Updated: 9/22/2003 1:32:28 PM

Proxy-arp problem when the port is not up. This solves a proxy-arp problem with lan-to-lan ports wherein the local/remote ip address is on the same subnet as the ethernet port.

Products: RASExpress, CC4H-4S, CC4H-4U, CC4M-8, CC4S-8

Updated: 9/22/2003 1:32:28 PM

Truncation error in setting session timeout from radius server.

Products: RASExpress, CC4H-4S, CC4H-4U, CC4M-8, CC4S-8

Updated: 9/22/2003 1:32:28 PM

Static IP address assignment problem on ISDN PRI where a user with a static ip address who called in is not able to call in again until the port occupied earlier is used by a different user with another ip address or a port assigned address.

Products: RASExpress, CC4H-4S, CC4H-4U, CC4M-8, CC4S-8

Updated: 9/22/2003 1:32:28 PM

Assignment of a stale static ip address of an earlier user for all subsequent users on that port.

Products: RASExpress, CC4H-4S, CC4H-4U, CC4M-8, CC4S-8

Updated: 9/22/2003 1:32:28 PM

TACACS accounting problem.

Products: RASExpress, CC4H-4S, CC4H-4U, CC4M-8, CC4S-8

Updated: 9/22/2003 1:32:28 PM

Connect problem in IPX AG Server while restarting RASExpress.

Products: RASExpress, CC4H-4S, CC4H-4U, CC4M-8, CC4S-8

Updated: 9/22/2003 1:32:28 PM

Problem saving the authentication option using telnet/web for ppp ports.

Products: RASExpress, CC4H-4S, CC4H-4U, CC4M-8, CC4S-8

Updated: 9/22/2003 1:32:28 PM

Error in the ip address reported in the RADIUS accounting packet for a multilink connection.

Products: RASExpress, CC4H-4S, CC4H-4U, CC4M-8, CC4S-8

Updated: 9/22/2003 1:32:28 PM

An invalid radius accounting packet sent to radius server for MCSI client authentication which could crash the server.

Products: RASExpress, CC4H-4S, CC4H-4U, CC4M-8, CC4S-8

Updated: 9/22/2003 1:32:26 PM

Crashing problem with radius authentication for Win2k MCSI client.

Products: RASExpress, CC4H-4S, CC4H-4U, CC4M-8, CC4S-8

Updated: 9/22/2003 1:32:25 PM

Crashing problem with autotelnet on a terminal dial-in.

Products: RASExpress, CC4H-4S, CC4H-4U, CC4M-8, CC4S-8

Updated: 9/22/2003 1:32:25 PM

Problem sending the actual account terminate cause to radius server for accounting.

Products: RASExpress, CC4H-4S, CC4H-4U, CC4M-8, CC4S-8

Updated: 9/22/2003 1:32:21 PM

Caller/called party id problem for analog calls on PRI. This is for a Radius callback problem.

Products: RASExpress, CC4H-4S, CC4H-4U, CC4M-8, CC4S-8

Updated: 9/22/2003 1:32:21 PM

Crashing problem with lan-to-lan port on dialout.

Products: RASExpress, CC4H-4S, CC4H-4U, CC4M-8, CC4S-8

Updated: 9/22/2003 1:32:19 PM

Crashing problem with FTP when junk characters are received.

Products: RASExpress, CC4H-4S, CC4H-4U, CC4M-8, CC4S-8

Updated: 9/22/2003 1:32:18 PM

Crash due to buffer overflow in FTP.

Products: RASExpress, CC4H-4S, CC4H-4U, CC4M-8, CC4S-8

Updated: 9/22/2003 1:32:15 PM

Crashing problem with FTP when the username exceeds the maximum limit(48).

Products: RASExpress, CC4H-4S, CC4H-4U, CC4M-8, CC4S-8

Updated: 9/22/2003 1:32:11 PM

Configure Reject packets to include/display the CCP options rejected.

Products: RASExpress, CC4H-4S, CC4H-4U, CC4M-8, CC4S-8

Updated: 9/18/2003 10:34:08 AM

I have Windows 2000 with Active Directory installed. How do I setup the Complete 4000 to use Windows 2000 authentication Do I need to install a Radius server

Products: CC4M-8, CC4H-4S, CC4S-8

Updated: 9/18/2003 10:34:07 AM

How do I configure the CC4000 for Modem Pooling, (The ability to install it in a LAN , and to have multiple users dialing out through the machine , using your client software)

Product: CC4H-4S

Updated: 9/18/2003 10:34:01 AM

Where do I find the CC4000 Single-Board Computer (IPC-623C) Video / Ethernet Drivers

Product: CC4M-8

Updated: 9/18/2003 10:33:50 AM

How to configure a RASExpress Server for Radius on the CommPlete 4000.

Product: CC4M-8

Updated: 9/18/2003 10:33:49 AM

How to setup Windows 2000 IAS Server to run as a Radius Server.

Product: CC4M-8

Updated: 9/17/2003 3:22:12 PM

Garbage / connection problems when some V.92 modems dial and the ISI card answers. V.44 negotiation problem with some modems.

Products: ISI5634PCI-8, ISI5634PCI-4, CC4M-8

Updated: 7/29/2003 2:33:00 PM

Can we configure multiple IP addresses on the Ethernet interface of the CommPlete 4000 RAS Server

Product: CC4M-8

Updated: 7/22/2003 9:28:14 AM

Is product upgradeable to V.92

Products: ISIHP-1S, ISIHP-4U, CC4H-4U, ISIHI-2S, ISIHI-2Sv, ISIHI-2U, ISIHP-24, ISIHP-2S, ISIHP-2U, ISIHP-4S-V110, ISIHP-4SD, ISIHP-4SD-V110, ISIHP-4UD, ISIHP-4U-V110

Updated: 7/2/2003 1:12:45 PM

I have a RAS server with these modems and remote 56k modems dialing in, why can't we connect at 56k

Products: CC4M-8, CC4H-4U, CC4H-4S

Updated: 6/24/2003 5:47:53 PM

How to setup callback using IAS and CC4000.

Product: CC4H-4S

Updated: 6/17/2003 8:35:04 AM

We are about to install a CC4H-4S on a network with variable length subnetting. When the mask 255.255.254.0 is entered the CommPlete server rejects it as being an invalid subnet mask. Is there a work-around for this problem

Product: CC4H-4S

Updated: 5/19/2003 4:45:03 PM

I need an analog or digital (BRI) supported dial-up router/server that I can assign IP addresses to incoming calls based upon the Username that the remote access dialer uses.

Product: CC4S-8

Updated: 5/19/2003 3:11:53 PM

I need the CommPlete Access Server with 16 analog ports. The CC4M-8 has 8 analog ports, what expansion card do I add for additional analog ports

Product: CC4M-8

Updated: 3/6/2003 3:41:56 PM

How do I get the Telnet menu driven screen to re-appear When I Telnet into it, I get a RASExpress prompt.

Product: CC4M-8

Updated: 3/11/2003 5:20:05 PM

My TACACS+ server is not authenticating, what could be the problem

Products: CC4M-8, CC4H-4S, CC4H-4U, CC4S-8

Updated: 2/26/2003 1:11:10 PM

How do I create the server.msg files on the MultiTech Commplete Communications Server 4000

Product: CC4S-8

Updated: 2/24/2003 9:39:47 AM

Is there some configuration required in the CommPlete 4000 to allow remote users to authenticate to the NT Domain

Product: CC4M-8

Updated: 2/24/2003 9:35:19 AM

Can my dial in users authenticate to a Windows NT domain

Product: CC4M-8

Updated: 2/17/2003 11:58:57 AM

Is it possible on the Userlist file to have only one User Name for all users and no passwords - only CR, ( Carriage Return )

Product: CC4M-8

Updated: 2/14/2003 9:31:01 AM

I want to use a CC4 with 32 Modems under Novell 5.0, does it support NDS Authentication, or does the admin need to handle two servers

Product: CC4M-8

Updated: 12/10/2003 1:44:04 PM

How many users can be stored in the local database

Product: CC4M-8

Updated: 11/14/2003 9:57:06 AM

Is there a method to validate both PAP and CHAP at the same time

Product: CC4H-4S

Updated: 11/14/2003 9:44:25 AM

I need the MAC Address, how do I get it from the machine

Product: CC4M-8

Updated: 10/16/2003 11:36:05 AM

I'd like to setup a Complete4000 by using authentication with a Linux server (Accounting on Linux). How do I setup this solution

Product: CC4M-8

Updated: 1/9/2003 6:18:12 PM

How can I reset RAS to default settings

Products: CC4M-8, CC4H-4U, CC4H-4S, CC4S-8

Updated: 9/30/2002 4:16:22 PM

What type of software is needed for the clients to dial out.

Products: CC4M-8, CC4H-4S, CC4H-4U, CC4S-8

Updated: 8/6/2002 9:28:54 AM

How do we configure the Multi-Tech RASExpress to use our Tacas server for authentification

Products: CC4M-8, CC4H-4S, CC4H-4U, CC4S-8

Updated: 8/23/2002 7:51:35 AM

What are the options to increase the ports Does the Commplete 4000 only use the ISI.... cards

Product: CC4M-8

Updated: 7/25/2002 2:32:33 PM

On what TCP or UDP port does WinMCSI communicate with the CommPlete 4000

Products: CC4M-8, CC4H-4S, CC4H-4U, CC4S-8, MCSI2000, WinMCSI

Updated: 7/22/2002 3:13:09 PM

Can the Commplete 4000 be configured to allow only outbound calls and prohibit any inbound calls

Products: CC4M-8, CC4H-4S, CC4H-4U, CC4S-8

Updated: 7/22/2002 2:40:23 PM

Problem when trying to connect through ISDN BRI lines to our RAS server. The lines ring and then sound as if they had picked up the lines, but no tones would follow the pickup.

Products: ISIHP-4U, CC4H-4S, CC4H-4U, ISIHI-2S, ISIHI-2Sv, ISIHI-2U, ISIHP-1S, ISIHP-2S, ISIHP-2U, ISIHP-24, ISIHP-4S-V110, ISIHP-4SD, ISIHP-4SD-V110, ISIHP-4U-V110, ISIHP-4UD

Updated: 7/19/2002 5:01:58 PM

What is the name of the file that stores the user names and passwords

Products: CC4M-8, CC4H-4S, CC4H-4U, CC4S-8

Updated: 7/15/2002 10:04:22 AM

Can we use our Windows 2000 Server to authenticate Dial-In Users on the CC4000

Products: CC4M-8, CC4H-4S, CC4H-4U, CC4S-8

Updated: 7/11/2002 5:09:01 PM

I have connected my PC to the serial port of the SBC card, but I don't see the menu. I can't configure RASExpress.

Products: CC4M-8, CC4H-4S, CC4H-4U, CC4S-8

Updated: 6/18/2002 2:08:26 PM

How many PCI slots does the server have

Products: CC4M-8, CC4H-4S, CC4H-4U, CC4S-8

Updated: 5/7/2002 6:14:37 PM

Does version 5.61 of RasExpress support WINS

Products: CC4M-8, CC4H-4S, CC4H-4U, CC4S-8

Updated: 2/7/2002 11:10:45 AM

Will RAS allow for cross domain authentication

Products: CC4M-8, CC4H-4S, CC4H-4U, CC4S-8

Updated: 2/7/2002 9:33:50 AM

It takes 90 seconds to free the port for the next call after disconnection of last call.

Products: RASExpress, CC4H-4S, CC4H-4U, CC4M-8, CC4S-8

Updated: 2/7/2002 8:12:42 AM

Does RASExpress support MS encryption

Products: RASExpress, CC4H-4S, CC4H-4U, CC4M-8, CC4S-8

Updated: 2/6/2002 5:54:48 PM

Is there an OID to disconnect a channel also via SNMP

Products: RASExpress, CC4H-4S, CC4H-4U, CC4M-8, CC4S-8

Updated: 2/6/2002 5:50:38 PM

Is there an OID for SNMP to give a userlist of connected users on RASExpress

Products: RASExpress, CC4H-4S, CC4H-4U, CC4M-8, CC4S-8

Updated: 2/6/2002 10:44:58 AM

In the PPP log files, the user name and password are in clear text view for each dial in, can this be disabled

Products: CC4M-8, CC4H-4S, CC4H-4U, CC4S-8

Updated: 2/1/2002 3:20:47 PM

You cannot place two simultaneous data calls.

Products: ISIHP-2U, CC4H-4S, CC4H-4U, ISIHI-2S, ISIHI-2Sv, ISIHI-2U, ISIHP-1S, ISIHP-24, ISIHP-2S, ISIHP-4U, ISIHP-4S-V110, ISIHP-4SD, ISIHP-4SD-V110, ISIHP-4U-V110, ISIHP-4UD

Updated: 12/13/2002 12:33:22 PM

We are looking for a RAS Server with UDP forwarding support (Broadcast / Multicast), Does your Commplete 4000 support UDP forwarding and how do we configure it

Products: CC4M-8, CC4H-4S, CC4H-4U, CC4S-8

Updated: 11/4/2002 4:41:00 PM

I need to change the communication parameters to (7, Even, 1), how can I configure the Asynchronous communication parameters (character format)

Product: CC2400

Updated: 11/26/2002 10:38:25 AM

I have a problem with Ras Dial Out using the MCSI redirector, How can I troubleshoot this

Product: CC4H-4S

Updated: 11/26/2002 10:26:02 AM

In the Commplete 4000 how do you specify a different radius port We are using one that is not the default port.

Product: CC4M-8

Updated: 11/25/2002 8:34:17 AM

The complete 4000 RAS is continuously rebooting during the intialization and BIOS process, after checking memory and during hardware checkup it shows unable to add 2 ISI cards in bus 0 and bus 2 slots.

Products: CC4M-8, CC4H-4S, CC4S-8

Updated: 11/25/2002 8:33:47 AM

Does the CC4000 support callback security

Product: CC4H-4S

Updated: 11/13/2002 3:53:14 PM

Everything had been working fine until we changed Internet Service Providers. I must have something set wrong because dial-in users can no longer get to the Internet.

Products: CC4M-8, CC4H-4S, CC4S-8, CC4H-4U

Updated: 10/21/2002 4:38:48 PM

Does the Radius software need to be installed on the PDC (primary domain controller) or a Windows 98 workstation

Product: CC4M-8

Updated: 10/21/2002 1:17:31 PM

Is RSA supported for remote security on any of the CommPlete 4000 products

Products: CC4S-8, CC4H-4S, CC4H-4U, CC4M-8

Updated: 10/18/2002 9:20:56 AM

How do I back up my CommPlete 4000

Products: CC4M-8, CC4H-4S, CC4H-4U, CC4S-8

Updated: 10/11/2002 12:26:42 PM

We have set the WinMCSI Redirector application on a Windows 2000 server, but we are not detecting a change in the carrier line (DCD).

Product: CC4M-8

Updated: 10/10/2002 3:57:30 PM

How is IP and Netmask assigned to a remote user

Product: CC4M-8

Updated: 1/31/2002 11:29:28 AM

The terminal adapter dials but cannot make a connection.

Products: ISIHP-2U, CC4H-4S, CC4H-4U, ISIHI-2S, ISIHI-2Sv, ISIHI-2U, ISIHP-1S, ISIHP-24, ISIHP-2S, ISIHP-4U, ISIHP-4S-V110, ISIHP-4SD, ISIHP-4SD-V110, ISIHP-4U-V110, ISIHP-4UD

Updated: 1/30/2002 6:07:40 PM

We have upgraded the software to RAS550, how do I copy the user data base from RAS530 to RAS550

Products: RASExpress, CC4H-4S, CC4H-4U, CC4M-8, CC4S-8

Updated: 1/29/2002 1:44:38 PM

I'm using regular DUN and it takes 20 seconds for my users to authenticate once the modems have negotiated a session. Can I speed this up

Products: CC4M-8, CC4H-4S, CC4H-4U, CC4S-8

Updated: 1/28/2002 5:16:29 PM

Can I utilize VPN connectivity through the Commplete 4000

Products: CC4M-8, CC4H-4S, CC4H-4U, CC4S-8

Updated: 1/28/2002 5:07:18 PM

Can I import users from a Novell Netware 4.11 server (bindery).

Products: CC4M-8, CC4H-4S, CC4H-4U, CC4S-8

Updated: 1/28/2002 5:00:21 PM

Does the CC4000 support IP Multicast

Products: CC4M-8, CC4H-4S, CC4H-4U, CC4S-8

Updated: 1/28/2002 4:45:16 PM

How do you change the supervisor's password after the initial setup

Products: CC4M-8, CC4H-4S, CC4H-4U, CC4S-8

Updated: 1/25/2002 2:32:48 PM

I can't configure my Terminal Adapter card for 2 lines.

Products: ISIHP-2S, ISIHI-2S, ISIHI-2Sv, ISIHI-2U, ISIHP-1S, ISIHP-24, ISIHP-2U, ISIHP-4S-V110, ISIHP-4SD, ISIHP-4SD-V110, ISIHP-4U, ISIHP-4U-V110, ISIHP-4UD, CC4H-4S, CC4H-4U

Updated: 1/24/2002 10:53:42 AM

When we use the RADIUS Server we can't connect using CHAP.

Products: CC4M-8, CC4H-4S, CC4H-4U, CC4S-8

Updated: 1/23/2002 4:04:34 PM

I have RADIUS (or TACACS+) Accounting enabled, but I'm not getting any information sent to my authentication server from RASExpress. How can I be sure that Accounting is working in RASExpress

Products: CC4M-8, CC4H-4S, CC4H-4U, CC4S-8

Updated: 1/23/2002 3:44:51 PM

RADIUS authentication is not working. How can I troubleshoot RASExpress and RADIUS problems

Products: CC4M-8, CC4H-4S, CC4H-4U, CC4S-8

Updated: 1/23/2002 3:22:56 PM

How can I associate a filter with a user

Products: CC4M-8, CC4H-4S, CC4H-4U, CC4S-8

Updated: 1/14/2002 11:28:14 AM

I am having trouble getting a dial up connection to work from Windows 2k. How do I configure RAS on Windows 2K

Products: CC4M-8, CC4H-4S, CC4H-4U, CC4S-8

Updated: 1/11/2002 10:08:13 AM

How do I change the date in RasExpress

Products: CC4M-8, CC4H-4S, CC4H-4U, CC4S-8

Updated: 6/25/2001 4:14:00 PM

random reboots

Products: RASExpress, CC4H-4S, CC4H-4U, CC4M-8, CC4S-8

Updated: 5/3/2001 11:08:04 AM

Modems listed out of order in RAS Console

Products: RASExpress, CC4H-4S, CC4H-4U, CC4M-8, CC4S-8

Updated: 4/25/2001 3:31:18 PM

Static IP address assigns problem

Products: CC4M-8, CC4H-4S, CC4H-4U, CC4S-8

Updated: 4/25/2001 9:13:56 AM

modem stuck in ONLINE forever

Products: CC4M-8, CC4H-4S, CC4H-4U, CC4S-8

Updated: 4/12/2001 8:03:35 AM

Is product upgradeable to V.92

Products: ISIHI-2U, CC4H-4S, CC4H-4U, ISIHI-2S, ISIHI-2Sv, ISIHP-1S, ISIHP-24, ISIHP-2S, ISIHP-2U, ISIHP-4U, ISIHP-4S-V110, ISIHP-4SD, ISIHP-4SD-V110, ISIHP-4U-V110, ISIHP-4UD

Updated: 4/12/2001 8:02:58 AM

Is product upgradeable to V.92

Products: ISIHI-2S, CC4H-4S, CC4H-4U, ISIHI-2Sv, ISIHI-2U, ISIHP-1S, ISIHP-24, ISIHP-2S, ISIHP-2U, ISIHP-4S-V110, ISIHP-4SD, ISIHP-4SD-V110, ISIHP-4U, ISIHP-4U-V110, ISIHP-4UD

Updated: 4/11/2001 5:34:41 PM

Is product upgradeable to V.92

Products: ISIHP-2U, CC4H-4S, CC4H-4U, ISIHI-2S, ISIHI-2Sv, ISIHI-2U, ISIHP-1S, ISIHP-24, ISIHP-2S, ISIHP-4U, ISIHP-4S-V110, ISIHP-4SD, ISIHP-4SD-V110, ISIHP-4U-V110, ISIHP-4UD

Updated: 4/11/2001 5:34:03 PM

Is product upgradeable to V.92

Products: ISIHP-2S, CC4H-4S, CC4H-4U, ISIHI-2S, ISIHI-2Sv, ISIHI-2U, ISIHP-1S, ISIHP-24, ISIHP-2U, ISIHP-4U, ISIHP-4S-V110, ISIHP-4SD, ISIHP-4SD-V110, ISIHP-4U-V110, ISIHP-4UD

Updated: 4/11/2001 5:27:04 PM

Is product upgradeable to V.92

Products: ISIHP-4S, CC4H-4S, CC4H-4U, ISIHI-2S, ISIHI-2Sv, ISIHI-2U, ISIHP-1S, ISIHP-24, ISIHP-2S, ISIHP-2U, ISIHP-4S-V110, ISIHP-4SD, ISIHP-4SD-V110, ISIHP-4U-V110, ISIHP-4UD

Updated: 4/11/2001 5:24:43 PM

Is product upgradeable to V.92

Products: ISIHP-4U, CC4H-4S, CC4H-4U, ISIHI-2S, ISIHI-2Sv, ISIHI-2U, ISIHP-1S, ISIHP-24, ISIHP-2S, ISIHP-2U, ISIHP-4S-V110, ISIHP-4SD, ISIHP-4SD-V110, ISIHP-4U-V110, ISIHP-4UD

Updated: 11/28/2001 2:53:47 PM

ISI Hybrid ISDN card has poor throughput with internal Eicon DIVA card.

Products: ISIHP-4U, CC4H-4S, CC4H-4U, ISIHI-2S, ISIHI-2Sv, ISIHI-2U, ISIHP-1S, ISIHP-24, ISIHP-2S, ISIHP-2U, ISIHP-4S-V110, ISIHP-4SD, ISIHP-4SD-V110, ISIHP-4U-V110, ISIHP-4UD